Left Etherloop vehicle controller alerts

EGGLEFTVC alert codes

Showing 101–150 of 175

• EGGLEFTVC_a223 — Abort Fault Ext EGGLEFTVC_a223_abortFaultExt Indicates there was a data abort fault reported on the ECU.
• EGGLEFTVC_a224 — Ahb Write Fault EGGLEFTVC_a224_ahbWriteFault Indicates there was a fault reported on an AHB bus due to attempted write on a protected region.
• EGGLEFTVC_a231 — ADSP MIA EGGLEFTVC_a231_ADSP_MIA One or more expected Controller Area Network (CAN) messages from the Audio Digital Signal Processor (ADSP) electronic control unit (ECU) was not received. ADSP data from accelerometers may be unavailable.
• EGGLEFTVC_a232 — Seat Enc Stall Track EGGLEFTVC_a232_seatEncStallTrack The motor isn't providing encoder feedback
• EGGLEFTVC_a233 — Seat Enc Stall Tilt EGGLEFTVC_a233_seatEncStallTilt The motor isn't providing encoder feedback
• EGGLEFTVC_a234 — Seat Enc Stall Back EGGLEFTVC_a234_seatEncStallBack The motor isn't providing encoder feedback
• EGGLEFTVC_a235 — Seat Enc Stall Lift EGGLEFTVC_a235_seatEncStallLift The motor isn't providing encoder feedback
• EGGLEFTVC_a236 — Seat Curr Under Track EGGLEFTVC_a236_seatCurrUnderTrack The motor isn't responding
• EGGLEFTVC_a237 — Seat Curr Under Tilt EGGLEFTVC_a237_seatCurrUnderTilt The motor isn't responding
• EGGLEFTVC_a238 — Seat Curr Under Back EGGLEFTVC_a238_seatCurrUnderBack The motor isn't responding
• EGGLEFTVC_a239 — Seat Curr Under Lift EGGLEFTVC_a239_seatCurrUnderLift The motor isn't responding
• EGGLEFTVC_a240 — Seat Uncal Track EGGLEFTVC_a240_seatUncalTrack The seat track motor is not calibrated, which may cause position recall to be unavailable.
• EGGLEFTVC_a241 — Seat Uncal Tilt EGGLEFTVC_a241_seatUncalTilt The tilt motor is uncalibrated
• EGGLEFTVC_a242 — Seat Uncal Back EGGLEFTVC_a242_seatUncalBack The backrest motor is uncalibrated
• EGGLEFTVC_a243 — Seat Uncal Lift EGGLEFTVC_a243_seatUncalLift The lift motor is uncalibrated
• EGGLEFTVC_a244 — Seat Enc Over Track EGGLEFTVC_a244_seatEncOverTrack The motor has traveled beyond the expected range
• EGGLEFTVC_a245 — Seat Enc Over Tilt EGGLEFTVC_a245_seatEncOverTilt The motor has traveled beyond the expected range
• EGGLEFTVC_a246 — Seat Enc Over Back EGGLEFTVC_a246_seatEncOverBack The seat motor has traveled beyond the expected range.
• EGGLEFTVC_a247 — Seat Enc Over Lift EGGLEFTVC_a247_seatEncOverLift The motor has traveled beyond the expected range
• EGGLEFTVC_a248 — Seat Track Stall Debug EGGLEFTVC_a248_seatTrackStallDebug The seat track motor has unexpectedly stalled.
• EGGLEFTVC_a249 — Seat Tilt Stall Debug EGGLEFTVC_a249_seatTiltStallDebug The seat tilt motor has unexpectedly stalled.
• EGGLEFTVC_a250 — Seat Back Stall Debug EGGLEFTVC_a250_seatBackStallDebug The backrest motor has unexpectedly stalled, which may cause the motor to recalibrate.
• EGGLEFTVC_a251 — Seat Lift Stall Debug EGGLEFTVC_a251_seatLiftStallDebug The seat lift motor has unexpectedly stalled.
• EGGLEFTVC_a252 — Seat Track HC Enc Stl Dbg EGGLEFTVC_a252_seatTrackHCEncStlDbg The seat track motor encoder has unexpectedly stalled.
• EGGLEFTVC_a253 — Seat Tilt HC Enc Stl Dbg EGGLEFTVC_a253_seatTiltHCEncStlDbg The seat tilt motor encoder has unexpectedly stalled.
• EGGLEFTVC_a254 — Seat Back HC Enc Stl Dbg EGGLEFTVC_a254_seatBackHCEncStlDbg The backrest motor encoder has unexpectedly stalled
• EGGLEFTVC_a255 — Seat Lift HC Enc Stl Dbg EGGLEFTVC_a255_seatLiftHCEncStlDbg The seat lift motor encoder has unexpectedly stalled.
• EGGLEFTVC_a256 — Seat Abuse Motor Warn EGGLEFTVC_a256_seatAbuseMotorWarn The seat has detected that the track motor is close to exceeding normal operating times
• EGGLEFTVC_a257 — Seat Abuse Motor Stop EGGLEFTVC_a257_seatAbuseMotorStop The seat has detected that the track motor has exceeded normal operating times
• EGGLEFTVC_a258 — Seat Abuse Buffer Warn EGGLEFTVC_a258_seatAbuseBufferWarn Seat track motor abuse has been detected, with number of events within 5 minutes required to generate a warning exceeded
• EGGLEFTVC_a259 — Seat Abuse Buffer Full EGGLEFTVC_a259_seatAbuseBufferFull The seat track abuse has been detected, maximum number of events per time exceeded
• EGGLEFTVC_a265 — Can Rx Checksum Error EGGLEFTVC_a265_canRxChecksumError Software detected a checksum error
• EGGLEFTVC_a298 — Seat Back Hard Stop UL EGGLEFTVC_a298_seatBackHardStopUL The seat backrest has reached the upper hard stop limit and cannot move forward any further.
• EGGLEFTVC_a299 — Seat Back Hard Stop Dis EGGLEFTVC_a299_seatBackHardStopDis The upper hard stop limit for the seat backrest is disabled, meaning the seat backrest is allowed to move forward past the upper hard stop limit if requested.
• EGGLEFTVC_a317 — Epbm Limp Mode Enabled EGGLEFTVC_a317_epbmLimpModeEnabled EPBM enabled limp mode as part of emergency operation.
• EGGLEFTVC_a350 — Frunk Pinch Sensitive EGGLEFTVC_a350_frunkPinchSensitive The frunk strut saw the conditions indicating an object is being pinched
• EGGLEFTVC_a351 — Debug Frunk Current Spike EGGLEFTVC_a351_debugFrunkCurrentSpike The frunk strut saw a current spike
• EGGLEFTVC_a352 — Frunk Closing Latch Entry Failed EGGLEFTVC_a352_frunkClosingLatchEntryFailed Frunk did not close as expected.
• EGGLEFTVC_a354 — Frunk Uncalibrated EGGLEFTVC_a354_frunkUncalibrated The frunk has become uncalibrated
• EGGLEFTVC_a355 — Frunk Unexpected Stop EGGLEFTVC_a355_frunkUnexpectedStop The frunk stopped moving for an unexpected reason
• EGGLEFTVC_a356 — Frunk Factory Test EGGLEFTVC_a356_frunkFactoryTest Frunk factory test has been run
• EGGLEFTVC_a357 — Horn Undercurrent EGGLEFTVC_a357_hornUndercurrent Horn is drawing less current than expected.
• EGGLEFTVC_a358 — Horn Overcurrent EGGLEFTVC_a358_hornOvercurrent Horn is drawing more current than expected.
• EGGLEFTVC_a359 — Frunk Latch Exit No Position Change EGGLEFTVC_a359_frunkLatchExitNoPositionChange No position change on frunk latch exit, so the encoder has likely stalled
• EGGLEFTVC_a360 — Detected Stationary While Moving EGGLEFTVC_a360_detectedStationaryWhileMoving EPB stationary detect did not realize vehicle was moving when speed greater than 5 MPH.
• EGGLEFTVC_a361 — Stationary Thresholds Incorrect EGGLEFTVC_a361_stationaryThresholdsIncorrect EPB stationary detect exceeded angle and/or accel variance while vehicle was parked for 2 seconds.
• EGGLEFTVC_a362 — Moving Thresholds Incorrect EGGLEFTVC_a362_movingThresholdsIncorrect EPB stationary detect exceeded angle and/or accel variance while vehicle was at speed.
• EGGLEFTVC_a363 — Frunk Open Angle Set Req EGGLEFTVC_a363_frunkOpenAngleSetReq User attempted to set a new custom max open position for the frunk
• EGGLEFTVC_a364 — Debug Frunk Current Dropout EGGLEFTVC_a364_debugFrunkCurrentDropout The front trunk (frunk) current measurement dropped out during its latest motion.
• EGGLEFTVC_a365 — Frunk Accel Table Not Built EGGLEFTVC_a365_frunkAccelTableNotBuilt The frunk leader vehicle controller does not have a saved acceleration table, which is required for the sensitive pinch algorithm. Frunk pinch detection will not operate as expected.