Primary electric power-assisted steering alerts

EPASTP alert codes

Showing 151–200 of 269

• EPASTP_a151 — Am Permanent Emergency Off Requested EPASTP_a151_amPermanentEmergencyOffRequested This alert is reported by the ActuatorManager_R12 component when there is a current measurement failure.
• EPASTP_a152 — Exch Flash Ecc Exception EPASTP_a152_exchFlashEccException This alert is reported by the ExceptionHandler_TC3x (EXCH) component when there is a single-bit or multi-bit (all 1 and all 0) error in the pflash. This diagnostic is the handling of the exception thrown by the PFlash ECC when it encounter…
• EPASTP_a153 — Sdsm Block Selector Invalid EPASTP_a153_sdsmBlockSelectorInvalid This alert is reported by the StreamingDataStorageManager_R12 (SDSM) component when the requested BlockId for the streaming data store is invalid. Fast restart related feature.
• EPASTP_a154 — Sdsm Cs Error Invalid Primary EPASTP_a154_sdsmCsErrorInvalidPrimary This alert is reported by the StreamingDataStorageManager_R12 (SDSM) component when the CRC is not equal to saved CRC value at any memory block, but another is correct
• EPASTP_a155 — Sdsm Data Invalid All EPASTP_a155_sdsmDataInvalidAll This alert is reported by the StreamingDataStorageManager_R12 (SDSM) component when the CRC is not equal to saved CRC value in all memory blocks.
• EPASTP_a156 — Am Int Serial Err Safety Reset EPASTP_a156_amIntSerialErrSafetyReset This alert is reported when there is a GDU communication failure
• EPASTP_a157 — Mcudcp Invalid Ecu Id EPASTP_a157_mcudcpInvalidEcuId This alert is reported by the reported by the MCUDynamicConfigurationProvider_TC3x component when reading EndOfLine ECU parameters fails.
• EPASTP_a158 — Am Gdu Fail During Recovery EPASTP_a158_amGduFailDuringRecovery This alert is reported when there is a GDU failure during reversible recovery.
• EPASTP_a159 — Exch Flash Wordline Transient Err EPASTP_a159_exchFlashWordlineTransientErr This alert is reported by the ExceptionHandler_TC3x (EXCH) component when there is a double bit ECC error in the active pflash and additional ECC errors were found in the same wordline
• EPASTP_a160 — Rsth Cpu1 Unexpected Alarm EPASTP_a160_rsthCpu1UnexpectedAlarm This alert is reported when second core various misc error detection alarms.
• EPASTP_a161 — Tda Relayfetjunction Temp Checker EPASTP_a161_tdaRelayfetjunctionTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component when there is a phase relay overtemperature. Degradation parameters/estimator shall be checked, if those are correct, HW failure.
• EPASTP_a162 — Tda Bridgefetjunction Temp Checker EPASTP_a162_tdaBridgefetjunctionTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component is reported when there is a bridge FET overtemperature. Degradation parameters/estimator shall be checked, if those are correct, HW failure.
• EPASTP_a163 — Tda Powermodule Temp Checker EPASTP_a163_tdaPowermoduleTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component when there is a power module overtemperature. Degradation parameters/estimator shall be checked, if those are correct, HW failure.
• EPASTP_a164 — Tda Battfetjunction Temp Checker EPASTP_a164_tdaBattfetjunctionTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component when there is a battery FET overtemperature. Degradation parameters/estimator shall be checked, if those are correct, HW failure.
• EPASTP_a165 — Tda Dcbusshunt Temp Checker EPASTP_a165_tdaDcbusshuntTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component when there is a DC Bus shunt temperature higher than limit or not available
• EPASTP_a166 — Tda Phasecurrentshunt Temp Checker EPASTP_a166_tdaPhasecurrentshuntTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component when there is a phase current shunt temperature higher than limit or not available
• EPASTP_a167 — Iccd1 Err Queue Overflow EPASTP_a167_iccd1ErrQueueOverflow This alert is reported by the InterCoreCommunicationDriver_C1_R12 (ICCD1) component when the ErrorMessages that are transfered between the MCU Cores are overflowed -> Communication between the Cores is not working correctly. (Core1 SW prob…
• EPASTP_a168 — C1cs Invalid C1 App EPASTP_a168_c1csInvalidC1App This alert is reported by the Core1CheckerAndStarter_TC3x (C1CS) component when the validation of Core 1 application is failed (CRC check, HSM validation, Entity address check or the Core 1 application was not found).
• EPASTP_a169 — Scp Safety Reset EPASTP_a169_scpSafetyReset This alert is reported by the StartupCauseProvider_R12 (SCP) component if it determines that the startup cause is a safety reset.
• EPASTP_a170 — Pmp Dcvolt Age EPASTP_a170_pmpDcvoltAge This alert is reported by the PlatformModeProvider_R12 (PMP) component when the QualityofService of battery voltage signal is QOS_BVP_ERROR and DcVoltAge tolerance time is elapsed.
• EPASTP_a171 — Pmp Kgvalue Age EPASTP_a171_pmpKgvalueAge This alert is reported by the PlatformModeProvider_R12 (PMP) component when KgValue QualityofService is KG_ERROR and tolerance time has elapsed.
• EPASTP_a172 — Pmp Elang Motorcurrent Age EPASTP_a172_pmpElangMotorcurrentAge This alert is reported by the PlatformModeProvider_R12 (PMP) component when battery or DQ current QualityofService is CS_ERROR and tolerance time has elapsed or battery or DQ QoS latent failure with MotorContoroller operation mode is MOC_I…
• EPASTP_a173 — Pmp Rotorspeed Age EPASTP_a173_pmpRotorspeedAge This alert is reported by the PlatformModeProvider_R12 (PMP) component when rotorSpeed QualityofService is RPS_ERROR or RPS_SUBSTITUTE_VALUE and tolerance time has elapsed.
• EPASTP_a174 — Pmp Phasecurrent Age EPASTP_a174_pmpPhasecurrentAge This alert is reported by the PlatformModeProvider_R12 (PMP) component if phase current QualityofService is CS_ERROR and tolerance timeout has elapsed or the PhaseCurrents have latent failure and MotorController is not operating.
• EPASTP_a175 — Exch Flash Stored Config Err EPASTP_a175_exchFlashStoredConfigErr This alert is reported when ALM7[31] Flash Stored Configuration Error alarm
• EPASTP_a176 — Exch Cpu1 Exception Reset EPASTP_a176_exchCpu1ExceptionReset This alert is reported in case a reset is caused by exception on core1.
• EPASTP_a177 — Etsr Invalidated EPASTP_a177_etsrInvalidated This alert is reported when the ElapsedTimeSinceReset (ETSR) counter becomes greater than the ETSR_THRESHOLD_TIMESTAMP and counter forced to 0xFFFFFFFF
• EPASTP_a178 — Exch Wdt Exception EPASTP_a178_exchWdtException This alert is reported by the ExceptionHandler_TC3x (EXCH) component when there is a watchdog timeout exception.
• EPASTP_a179 — Ted Motorcoil Temp Checker EPASTP_a179_tedMotorcoilTempChecker This alert is reported when there is a motor overtemperature. Degradation parameters/estimator shall be checked, if those are correct, HW failure.
• EPASTP_a180 — Dm Deadline Violation C1 EPASTP_a180_dmDeadlineViolationC1 This alert is reported by the Deadline Monitor (DM) when at least one of the monitored tasks didn't finish or finished multiple times during its configured time frame on Core 1.
• EPASTP_a181 — Dm Deadline Violation C1 EPASTP_a181_dmDeadlineViolationC1 This alert is reported by the DeadlineMonitor (DM) if the elapsed time between two 250us task starts is out of the tolerated range on Core 1 then Safety Reset is initiated.
• EPASTP_a182 — Mcd Input Mia EPASTP_a182_mcdInputMia This alert is reported by the MotorControlDiagnostics_R12 (MCD) component if MTCControlSignal age reached the diagnostic limit.
• EPASTP_a183 — Sbch Comm Err Sbc To Mcu EPASTP_a183_sbchCommErrSbcToMcu This alert is reported by the SystemBasisChipHAL_A8140x (SBCH) component SBC if the communication check (SBC -> MCU) fails. Against random HW failures of the MCU and communication line including EMC.
• EPASTP_a184 — Sbcm Comm Buffer Overflow EPASTP_a184_sbcmCommBufferOverflow This alert is reported in case SBC Communication buffer overflow checker. Against systematic SW failures on SystemBasisChipManager component.
• EPASTP_a185 — Sbcscp QA Watchdog Reset EPASTP_a185_sbcscpQAWatchdogReset This alert is reported by the SBCStartupCauseProvider_A8140x (SBCSCP) component if external question-answer watchdog (Q&A) fails. MCU SM requires it, against systematic SW faults, and random HW faults of the time base.
• EPASTP_a186 — Wdh Comm Buffer Overflow EPASTP_a186_wdhCommBufferOverflow This alert is reported by the WatchdogHandler_A8140x (WDH) component in case SBC Communication buffer overflow checker. Against systematic SW failures on WatchdogHandler component.
• EPASTP_a187 — Epm Volt Fail EPASTP_a187_epmVoltFail This alert is reported by the ExternalPowerManager_A8140x (EPM) component in case of Undervoltage and Overvoltage on the V5P1 (TSU) and V5A (Communication) supplies. This diagnostics is used for root cause detection.
• EPASTP_a188 — Epm Comm Buffer Overflow EPASTP_a188_epmCommBufferOverflow This alert is reported by the ExternalPowerManager_A8140x (EPM) component in case SBC Communication buffer overflow checker. Against systematic SW failures on ExternalPowerManager component.
• EPASTP_a189 — Sbch Comm Err Mcu To Sbc EPASTP_a189_sbchCommErrMcuToSbc This alert is reported by the SystemBasisChipHAL_A8140x (SBCH) component in case SBC communication check (MCU -> SBC) fails. Against random HW failures of the MCU and communication line including EMC.
• EPASTP_a190 — Sbch Comm Buffer Overflow EPASTP_a190_sbchCommBufferOverflow This alert is reported in case SBC Communication buffer overflow checker. Against systematic SW failures on SystemBasisChipHAL component.
• EPASTP_a191 — Sbcscp Vcp2 Vuc Volt Fail EPASTP_a191_sbcscpVcp2VucVoltFail This alert is reported by the SBCStartupCauseProvider_A8140x (SBCSCP) component in case of MCU I/O power supply (VDD_IO) monitor by SBC and under/over voltage on the second charge pump. Against power supply faults of the main microcontroll…
• EPASTP_a192 — Osum C0 Csa Near Full EPASTP_a192_osumC0CsaNearFull This alert is reported by the OnlineStackUsageMonitor_R12 (OSUM) componen twhen context switch area usage on core 0 is almost full.
• EPASTP_a193 — Osum C0 Stack Near Full EPASTP_a193_osumC0StackNearFull This alert is reported by the OnlineStackUsageMonitor_R12 (OSUM) component when stack usage on core 0 is almost full.
• EPASTP_a194 — Am Nvdata Loss EPASTP_a194_amNvdataLoss This alert is reported when the Actuator Manager (AM) NvM Health status may be corrupted
• EPASTP_a195 — Imcm Comm Err C1 EPASTP_a195_imcmCommErrC1 This alert is reported by the IMCM_C1 (IMCM) component in case Inter-MCU comm failure or the other side is not communicating (UV or other failure).
• EPASTP_a196 — Top Eol Tas Offset Invalid EPASTP_a196_topEolTasOffsetInvalid This alert is reported by the TASOffsetProvider_Generic (TOP) component in case of tas offset calibration data failure.
• EPASTP_a197 — Difp Difactor Invalid EPASTP_a197_difpDifactorInvalid This alert is reported by the DIFactorProvider_Generic (DIFP) component in case of DI factor Calibration data failure.
• EPASTP_a198 — Osum C1 Csa Near Full EPASTP_a198_osumC1CsaNearFull This alert is reported by the OnlineStackUsageMonitor_R12 (OSUM) component when context switch area (CSA) stack usage on core 1 is almost full.
• EPASTP_a199 — Osum C1 Stack Near Full EPASTP_a199_osumC1StackNearFull This alert is reported by the OnlineStackUsageMonitor_R12 (OSUM) component when stack usage on core 1 is almost full.
• EPASTP_a200 — Amm Input Buffer Overflow EPASTP_a200_ammInputBufferOverflow This alert is reported by the ApplicationManagerProxy_Generic (AMM) component if between two executions the applications send more than 10 application management messages to port LocalManagementMessages. The alert will not be cleared.