Integrated dynamic brake alerts
Browse 160 IDB alert codes and open an entry for its description and recorded conditions.
IDB alert codes
Showing 1–50 of 160
- IDB_a001 — Mcu Generic Fault IDB_a001_mcuGenericFault An internal software/hardware issue is detected on the the IDB MCU.
- IDB_a002 — Supply Overvoltage IDB_a002_supplyOvervoltage The IDB reports a high power supply voltage.
- IDB_a003 — Supply Hard Overvoltage IDB_a003_supplyHardOvervoltage The IDB reports a high power supply voltage.
- IDB_a004 — Supply Undervoltage IDB_a004_supplyUndervoltage The IDB reports a low power supply voltage.
- IDB_a005 — Supply Mid Undervoltage IDB_a005_supplyMidUndervoltage The IDB reports a low power supply voltage.
- IDB_a006 — Supply Hard Undervoltage IDB_a006_supplyHardUndervoltage The IDB reports a low power supply voltage.
- IDB_a007 — Wake Line Open IDB_a007_wakeLineOpen IDB Low Voltage (LV) state CAN signal from Front Vehicle Controller (VCFRONT) reports LV is on while the wake line voltage is off.
- IDB_a008 — Motor Power Open IDB_a008_motorPowerOpen IDB motor power line open circuit is detected.
- IDB_a009 — Asic Boost Fault IDB_a009_asicBoostFault IDB ASIC or Electronic Control Unit power line (ECU) voltage is high/low.
- IDB_a010 — Asic Generic Fault IDB_a010_asicGenericFault IDB ASIC hardware has experienced an issue.
- IDB_a011 — Solenoid Valve Fault IDB_a011_solenoidValveFault An IDB solenoid valve issue has occured.
- IDB_a012 — Motor Generic Fault IDB_a012_motorGenericFault An IDB hydraulic pump motor hardware issue has occured.
- IDB_a013 — Motor Pos Sensor Fault IDB_a013_motorPosSensorFault An IDB motor position sensor issue has occured.
- IDB_a014 — Fr LWSS Fault IDB_a014_FrLWSSFault A front-left wheel speed signal issue has occured.
- IDB_a015 — Fr RWSS Fault IDB_a015_FrRWSSFault A front-right wheel speed signal issue has occured.
- IDB_a016 — Re LWSS Fault IDB_a016_ReLWSSFault A rear-left wheel speed signal issue has occured.
- IDB_a017 — Re RWSS Fault IDB_a017_ReRWSSFault A rear-right wheel speed signal issue has occured.
- IDB_a018 — WSS Generic Fault IDB_a018_WSSGenericFault A wheel speed sensor has experienced an issue or has an incorrect air gap with the tone ring.
- IDB_a019 — Pedal Sensor Fault IDB_a019_pedalSensorFault IDB pedal travel sensor channel 1 or 2 signal has experienced an issue, or the sensor is shorted to power/ground.
- IDB_a020 — RCU pedal Travel Mismatch IDB_a020_RCUpedalTravelMismatch The Integrated Dynamic Brake (IDB) detected an issue with the RCU pedal travel sensor signal.
- IDB_a021 — Pedal Sensor Not Cal IDB_a021_pedalSensorNotCal The IDB pedal travel sensor offset has not been calibrated.
- IDB_a022 — Brake Fluid Low IDB_a022_brakeFluidLow The Integrated Dynamic Brake (IDB) has measured a low brake fluid level.
- IDB_a023 — Steering Implausible IDB_a023_steeringImplausible The Electronic Power Assisted Steering Primary (EPAS3P) steering angle signal is implausible.
- IDB_a024 — Yaw Implausible IDB_a024_yawImplausible The Restraint Control Module (RCM) yaw rate signal is implausible.
- IDB_a025 — Ay Implausible IDB_a025_ayImplausible The Restraint Control Module (RCM) lateral acceleration signal is implausible.
- IDB_a026 — Ax Implausible IDB_a026_axImplausible The Restraint Control Module (RCM) longitudinal acceleration signal is implausible.
- IDB_a027 — Circuit Pres Sensor Fault IDB_a027_circuitPresSensorFault The IDB circuit pressure sensor signal has an issue or the sensor is shorted to power/ground.
- IDB_a028 — Sim Pres Sensor Fault IDB_a028_simPresSensorFault The IDB pedal simulator pressure sensor signal has an issue or the sensor is shorted to power/ground.
- IDB_a029 — Pressure Sens Not Cal IDB_a029_pressureSensNotCal The IDB pressure sensor offsets are not calibrated.
- IDB_a030 — Fluid Leak Detected IDB_a030_fluidLeakDetected The IDB has detected a hydraulic brake fluid leak.
- IDB_a031 — Solenoid Valve Stuck IDB_a031_solenoidValveStuck An IDB solenoid valve is stuck open or closed.
- IDB_a032 — Motor Soft Overheat IDB_a032_motorSoftOverheat The IDB motor coil is overheating.
- IDB_a033 — Motor Hard Overheat IDB_a033_motorHardOverheat The IDB motor coil has overheated.
- IDB_a034 — Motor Position Set Fault IDB_a034_motorPositionSetFault The IDB pump motor origin is not set.
- IDB_a035 — Motor Stuck IDB_a035_motorStuck The IDB pump motor is stuck.
- IDB_a036 — Party Bus Off IDB_a036_partyBusOff The IDB PARTY CAN bus is off.
- IDB_a037 — Chassis Bus Off IDB_a037_chassisBusOff The IDB CHASSIS CAN bus is off.
- IDB_a038 — Motor Init Fault IDB_a038_motorInitFault The IDB pump motor initialization check was interrupted.
- IDB_a039 — Abs Active IDB_a039_absActive ABS control is active.
- IDB_a040 — Ebd Active IDB_a040_ebdActive EBD control is active.
- IDB_a041 — Vdc Active IDB_a041_vdcActive VDC control is active.
- IDB_a042 — Btc Active IDB_a042_btcActive BTC control is active.
- IDB_a043 — Cbc Active IDB_a043_cbcActive CBC control is active.
- IDB_a044 — Standstill Skid Detected IDB_a044_standstillSkidDetected A vehicle skid is detected while actuating an external system-level brake torque request from the Drive Inverter (DI).
- IDB_a045 — Panic Brake Assist Active IDB_a045_panicBrakeAssistActive PBA is active.
- IDB_a046 — Fade Compensation Active IDB_a046_fadeCompensationActive HFC is active.
- IDB_a047 — Brake Disc Wipe Active IDB_a047_brakeDiscWipeActive BDW is active.
- IDB_a048 — Scm Active IDB_a048_scmActive SCM is active.
- IDB_a049 — Cdp Active IDB_a049_cdpActive CDP is active.
- IDB_a050 — Abs Faulted IDB_a050_absFaulted ABS control may be unavailable.