Rear vehicle controller alerts

VCREAR alert codes

Showing 101–150 of 250

• VCREAR_a172 — SPI MIA VCREAR_a172_SPI_MIA The communication link between Electronic Parking Brake (EPB) and Electronic Parking Brake Monitor (EPBM) is not functioning as expected.
• VCREAR_a173 — Hi Current Missing VCREAR_a173_hiCurrentMissing Deprecated, no longer set. An apply/release command was issued to the Electronic Parking Brake while the high current feed was missing
• VCREAR_a174 — Csm Release Failed VCREAR_a174_csmReleaseFailed Electronic Parking Brake was unable to release due to fault.
• VCREAR_a175 — Csm Release Retry VCREAR_a175_csmReleaseRetry Electronic Parking Brake release was interrupted. Release will be retried.
• VCREAR_a176 — Csm Apply Failed VCREAR_a176_csmApplyFailed Electronic Parking Brake apply failed.
• VCREAR_a177 — Csm Apply Retry VCREAR_a177_csmApplyRetry Electronic Parking Brake apply was interrupted. Apply will be retried.
• VCREAR_a178 — Caliper State Unknown VCREAR_a178_caliperStateUnknown Electronic Parking Brake was not able to determine caliper state on boot.
• VCREAR_a179 — Epb Problem VCREAR_a179_epbProblem Customer facing alert for Electronic Parking Brake issues which occur when caliper is not moving
• VCREAR_a180 — Dynamic Active VCREAR_a180_dynamicActive Customer facing alert issued when Electronic Parking Brake is applied at higher than 5mph
• VCREAR_a181 — Too Steep Grade To Park VCREAR_a181_TooSteepGradeToPark Road grade is too steep to secure with Park Brake
• VCREAR_a182 — One EPB Applied Unsec Env VCREAR_a182_OneEPBAppliedUnsecEnv One Electronic Parking Brake (EPB) not applied, and road grade is too steep to secure vehicle with only one EPB
• VCREAR_a183 — Cdp Not Available VCREAR_a183_cdpNotAvailable Stability Control reports Controlled Deceleration for Parking Brake is not available when car is in DRIVE
• VCREAR_a184 — Dynamic Park Abort VCREAR_a184_dynamicParkAbort Non-nominal termination of dynamic park
• VCREAR_a185 — Summon Aborted VCREAR_a185_summonAborted
• VCREAR_a186 — External Park Abort VCREAR_a186_externalParkAbort Non-nominal termination of external park
• VCREAR_a187 — Cdp Dynamic VCREAR_a187_cdpDynamic Stability Control has begun Controlled Deceleration for Parking Brake
• VCREAR_a188 — Epb Dynamic VCREAR_a188_epbDynamic Electronic Parking Brake is performing dynamic apply
• VCREAR_a189 — Epb Dynamic Park Canceled VCREAR_a189_epbDynamicParkCanceled Electronic Parking Brake was attempting to dynamic park, Controlled Deceleration for Parking Brake is unavailable, and speed crossed above 8.8kph
• VCREAR_a190 — Csm Apply Degraded VCREAR_a190_csmApplyDegraded Electronic Parking Brake apply failed.
• VCREAR_a191 — Csm Release Degraded VCREAR_a191_csmReleaseDegraded Electronic Parking Brake was unable to release fully.
• VCREAR_a195 — Park For Driver Is Leaving VCREAR_a195_parkForDriverIsLeaving The Electronic Parking Brake (EPB) reports the driver is leaving and parks the vehicle.
• VCREAR_a196 — Free Roll Mode Active VCREAR_a196_freeRollModeActive will prevent EPB from parking when the driver leaves
• VCREAR_a197 — Free Roll Mode At Speed VCREAR_a197_freeRollModeAtSpeed If vehicle reaches 8.8kph, EPB will park
• VCREAR_a198 — Hold Clamp Complete VCREAR_a198_holdClampComplete EPB hold clamp finished, log I, V, and calculated R
• VCREAR_a200 — Pm Unpark Not Allowed VCREAR_a200_PmUnparkNotAllowed DI requested unpark but PM didn't allow it
• VCREAR_a201 — Precharge Failed VCREAR_a201_prechargeFailed The Rear Vehicle Controller (VCREAR) precharge circuit did not raise the voltage to the target voltage in the expected amount of time.
• VCREAR_a202 — Remote Epb Config Incompatible VCREAR_a202_remoteEpbConfigIncompatible EPB's brake HW config is not compatible remote EPB's brake HW config
• VCREAR_a203 — Hw Brake Type Mismatch VCREAR_a203_hwBrakeTypeMismatch Electronic Parking Brake's learned configuration does not match the reported config from the gateway
• VCREAR_a204 — Undervoltage Loadshed Triggered VCREAR_a204_undervoltageLoadshedTriggered Undervoltage loadshed protection has tripped on the Rear Vehicle Controller (VCREAR). Low Voltage (LV) bridge is expected to be open until the protection is cleared.
• VCREAR_a205 — Pcs Ov Shutdown Triggered VCREAR_a205_pcsOvShutdownTriggered Power Conversion Sustem (PCS) overvoltage shutdown protection has tripped on the Rear Vehicle Controller (VCREAR).
• VCREAR_a206 — Pcs Ov Shutdown Self Test Failure VCREAR_a206_pcsOvShutdownSelfTestFailure Power Conversion System (PCS) Overvoltage Shutdown protection has become active on the Rear Vehicle Controller (VCREAR).
• VCREAR_a208 — Pcs Ov Clamp Triggered VCREAR_a208_pcsOvClampTriggered Power Conversion System (PCS) overvoltage clamp protection has tripped on the Rear Vehicle Controller (VCREAR).
• VCREAR_a209 — Pcs Ov Clamp Self Testfailure VCREAR_a209_pcsOvClampSelfTestfailure The Power Conversion System (PCS) Overvoltage (OV) Clamp Protection Circuit self-test is unsuccessful due to circuit voltage readings outside of the normal operating range, which may prevent the circuit from operating as expected.
• VCREAR_a210 — Park For Driver Is Leaving Debug VCREAR_a210_parkForDriverIsLeavingDebug The Electronic Parking Brake (EPB) reports the driver is leaving and parks the vehicle.
• VCREAR_a211 — Pcs Ov Clamp Self Test Complete Dbg VCREAR_a211_pcsOvClampSelfTestCompleteDbg The Power Conversion System (PCS) Overvoltage (OV) Clamp Protection Circuit self-test has been completed.
• VCREAR_a213 — Pcs Open Circuit Detect VCREAR_a213_pcsOpenCircuitDetect The Rear Vehicle Controller (VCREAR) open circuit detection for the Power Conversion System (PCS) has tripped.
• VCREAR_a214 — Air Comp Under Current VCREAR_a214_airCompUnderCurrent Air compressor current implausibly low.
• VCREAR_a215 — Air Comp Driver Fault VCREAR_a215_airCompDriverFault The driver circuitry for the air suspension compressor reports a condition affecting functionality. The air compressor will be unavailable while the condition persists.
• VCREAR_a216 — SPI MIA debug Data1 VCREAR_a216_SPI_MIA_debugData1 The communication link between Electronic Parking Brake and Electronic Parking Brake Monitor has encountered an error.
• VCREAR_a217 — SPI MIA debug Data2 VCREAR_a217_SPI_MIA_debugData2 The communication link between Electronic Parking Brake and Electronic Parking Brake Monitor has encountered an error.
• VCREAR_a218 — soc Monitor Detected Threshold Soc VCREAR_a218_socMonitorDetectedThresholdSoc State of charge (soc) monitor turns on hazards when charging and surpassing the threshold set by the data byte of the UDS command (0x0613)
• VCREAR_a220 — Vctrailer Stc Stuck On VCREAR_a220_vctrailerStcStuckOn The rear controller (VCREAR) detected that VCTRAILER reported voltage was present on the 16V rail while it was powered off
• VCREAR_a221 — Vctrailer Brake Status MIA VCREAR_a221_vctrailerBrakeStatusMIA The rear controller (VCREAR) detected that VCTRAILER_brakeStatus was not received or contained errors while in drive power state
• VCREAR_a222 — Vctrailer Disabled By Config VCREAR_a222_vctrailerDisabledByConfig The rear controller (VCREAR) detected that GTW_towPackage is set to NONE, and has disabled the power to Trailer ECU
• VCREAR_a223 — Vctrailer Overcurrent VCREAR_a223_vctrailerOvercurrent The rear controller (VCREAR) detected overcurrent and has disabled the power to Trailer ECU
• VCREAR_a225 — Epb Active Decel VCREAR_a225_epbActiveDecel Stability Control has begun Controlled Deceleration for Parking Brake
• VCREAR_a231 — ADSP MIA VCREAR_a231_ADSP_MIA One or more expected Controller Area Network (CAN) messages from the Audio Digital Signal Processor (ADSP) electronic control unit (ECU) was not received. ADSP data from accelerometers may be unavailable.
• VCREAR_a239 — Nxppca9539 Fault VCREAR_a239_nxppca9539Fault Unexpected fault in a PCA9539 chip
• VCREAR_a241 — Di Output Locked VCREAR_a241_diOutputLocked A request to change the DI power state has been denied.
• VCREAR_a242 — Hv Output Locked VCREAR_a242_hvOutputLocked A request to change the HVC or Contactor power state has been denied.