Skip to content

VCREAR_a183 — Cdp Not Available

Full alert identifier: VCREAR_a183_cdpNotAvailable

Alert description

Stability Control reports Controlled Deceleration for Parking Brake is not available when car is in DRIVE

Potential impact

Electronic Parking Brake Monitor and/or Stability Control are faulted, Controlled Deceleration for Parking Brake cannot be performed

Set condition

(ESP_cdpStatus == CDP_IS_NOT_AVAILABLE or VCLEFT/VCRIGHT_okayToRequestCDP == EPB_EXTERNAL_APPLY_INVALID) when VCFRONT_vehiclePowerState == VEHICLE_POWER_STATE_DRIVE

Clear condition

ESP_cdpStatus == CDP_IS_AVAILABLE and VCLEFT/VCRIGHT_okayToRequestCDP == EPB_EXTERNAL_APPLY_IDLE or VCFRONT_vehiclePowerState != VEHICLE_POWER_STATE_DRIVE

Signals to check

These diagnostic fields are associated with VCREAR_a183. Check the alert's Alert Log in Service Mode Plus for available values.

Signal Unit
Brake Fluid Confirmed Low VCREAR_a183_brakeFluidConfirmedLow —
Cdp Cannot Be Commanded VCREAR_a183_cdpCannotBeCommanded —
Cdp Not Starting VCREAR_a183_cdpNotStarting —
Cdp Not Stopping VCREAR_a183_cdpNotStopping —
Epbm Invalidated VCREAR_a183_epbmInvalidated —
Esm Operation Trigger VCREAR_a183_esmOperationTrigger —
Esm State VCREAR_a183_esmState —
Esm State Request VCREAR_a183_esmStateRequest —
Show 14 more fields
Signal Unit
Esp Cdp Status VCREAR_a183_espCdpStatus
0
IDLE
1
VALID
2
INVALID
—
Esp Confirmed Invalid VCREAR_a183_espConfirmedInvalid —
Esp Invalid Or Unsure VCREAR_a183_espInvalidOrUnsure —
Is Retransmit VCREAR_a183_isRetransmit —
Last Factory Mode VCREAR_a183_lastFactoryMode —
Last Local Epb Dynamic VCREAR_a183_lastLocalEpbDynamic —
Last Low Brake Fluid VCREAR_a183_lastLowBrakeFluid —
Last Remote Epb Dynamic VCREAR_a183_lastRemoteEpbDynamic —
Local Cdp State VCREAR_a183_localCdpState
0
UNKNOWN
1
VALID
2
FAULT
—
Local Epb Dynamic VCREAR_a183_localEpbDynamic —
Redundant Braking Enabled VCREAR_a183_redundantBrakingEnabled —
Remote Cdp State VCREAR_a183_remoteCdpState
0
UNKNOWN
1
VALID
2
FAULT
—
Remote Epb Dynamic VCREAR_a183_remoteEpbDynamic —
Remote Epb Status Unsure VCREAR_a183_remoteEpbStatusUnsure —

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of VCREAR_a183.

Browse all VCREAR alert codes