Secondary electric power-assisted steering alerts

EPASTS alert codes

Showing 151–200 of 270

• EPASTS_a151 — Am Permanent Emergency Off Requested EPASTS_a151_amPermanentEmergencyOffRequested This alert is reported by the ActuatorManager_R12 component when there is a current measurement failure.
• EPASTS_a152 — Exch Flash Ecc Exception EPASTS_a152_exchFlashEccException This alert is reported by the ExceptionHandler_TC3x (EXCH) component when there is a single-bit or multi-bit (all 1 and all 0) error in the pflash. This diagnostic is the handling of the exception thrown by the PFlash ECC when it encounter…
• EPASTS_a153 — Sdsm Block Selector Invalid EPASTS_a153_sdsmBlockSelectorInvalid This alert is reported by the StreamingDataStorageManager_R12 (SDSM) component when the requested BlockId for the streaming data store is invalid. Fast restart related feature.
• EPASTS_a154 — Sdsm Cs Error Invalid Primary EPASTS_a154_sdsmCsErrorInvalidPrimary This alert is reported by the StreamingDataStorageManager_R12 (SDSM) component when the CRC is not equal to saved CRC value at any memory block, but another is correct
• EPASTS_a155 — Sdsm Data Invalid All EPASTS_a155_sdsmDataInvalidAll This alert is reported by the StreamingDataStorageManager_R12 (SDSM) component when the CRC is not equal to saved CRC value in all memory blocks.
• EPASTS_a156 — Am Int Serial Err Safety Reset EPASTS_a156_amIntSerialErrSafetyReset This alert is reported when there is a GDU communication failure
• EPASTS_a157 — Mcudcp Invalid Ecu Id EPASTS_a157_mcudcpInvalidEcuId This alert is reported by the reported by the MCUDynamicConfigurationProvider_TC3x component when reading EndOfLine ECU parameters fails.
• EPASTS_a158 — Am Gdu Fail During Recovery EPASTS_a158_amGduFailDuringRecovery This alert is reported when there is a GDU failure during reversible recovery.
• EPASTS_a159 — Exch Flash Wordline Transient Err EPASTS_a159_exchFlashWordlineTransientErr This alert is reported by the ExceptionHandler_TC3x (EXCH) component when there is a double bit ECC error in the active pflash and additional ECC errors were found in the same wordline
• EPASTS_a160 — Rsth Cpu1 Unexpected Alarm EPASTS_a160_rsthCpu1UnexpectedAlarm This alert is reported when second core various misc error detection alarms.
• EPASTS_a161 — Tda Relayfetjunction Temp Checker EPASTS_a161_tdaRelayfetjunctionTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component when there is a phase relay overtemperature. Degradation parameters/estimator shall be checked, if those are correct, HW failure.
• EPASTS_a162 — Tda Bridgefetjunction Temp Checker EPASTS_a162_tdaBridgefetjunctionTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component is reported when there is a bridge FET overtemperature. Degradation parameters/estimator shall be checked, if those are correct, HW failure.
• EPASTS_a163 — Tda Powermodule Temp Checker EPASTS_a163_tdaPowermoduleTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component when there is a power module overtemperature. Degradation parameters/estimator shall be checked, if those are correct, HW failure.
• EPASTS_a164 — Tda Battfetjunction Temp Checker EPASTS_a164_tdaBattfetjunctionTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component when there is a battery FET overtemperature. Degradation parameters/estimator shall be checked, if those are correct, HW failure.
• EPASTS_a165 — Tda Dcbusshunt Temp Checker EPASTS_a165_tdaDcbusshuntTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component when there is a DC Bus shunt temperature higher than limit or not available
• EPASTS_a166 — Tda Phasecurrentshunt Temp Checker EPASTS_a166_tdaPhasecurrentshuntTempChecker This alert is reported by the TemperatureDiagnostics_Actuator_R12 (TDA) component when there is a phase current shunt temperature higher than limit or not available
• EPASTS_a167 — Iccd1 Err Queue Overflow EPASTS_a167_iccd1ErrQueueOverflow This alert is reported by the InterCoreCommunicationDriver_C1_R12 (ICCD1) component when the ErrorMessages that are transfered between the MCU Cores are overflowed -> Communication between the Cores is not working correctly. (Core1 SW prob…
• EPASTS_a168 — C1cs Invalid C1 App EPASTS_a168_c1csInvalidC1App This alert is reported by the Core1CheckerAndStarter_TC3x (C1CS) component when the validation of Core 1 application is failed (CRC check, HSM validation, Entity address check or the Core 1 application was not found).
• EPASTS_a169 — Scp Safety Reset EPASTS_a169_scpSafetyReset This alert is reported by the StartupCauseProvider_R12 (SCP) component if it determines that the startup cause is a safety reset.
• EPASTS_a170 — Pmp Dcvolt Age EPASTS_a170_pmpDcvoltAge This alert is reported by the PlatformModeProvider_R12 (PMP) component when the QualityofService of battery voltage signal is QOS_BVP_ERROR and DcVoltAge tolerance time is elapsed.
• EPASTS_a171 — Pmp Kgvalue Age EPASTS_a171_pmpKgvalueAge This alert is reported by the PlatformModeProvider_R12 (PMP) component when KgValue QualityofService is KG_ERROR and tolerance time has elapsed.
• EPASTS_a172 — Pmp Elang Motorcurrent Age EPASTS_a172_pmpElangMotorcurrentAge This alert is reported by the PlatformModeProvider_R12 (PMP) component when battery or DQ current QualityofService is CS_ERROR and tolerance time has elapsed or battery or DQ QoS latent failure with MotorContoroller operation mode is MOC_I…
• EPASTS_a173 — Pmp Rotorspeed Age EPASTS_a173_pmpRotorspeedAge This alert is reported by the PlatformModeProvider_R12 (PMP) component when rotorSpeed QualityofService is RPS_ERROR or RPS_SUBSTITUTE_VALUE and tolerance time has elapsed.
• EPASTS_a174 — Pmp Phasecurrent Age EPASTS_a174_pmpPhasecurrentAge This alert is reported by the PlatformModeProvider_R12 (PMP) component if phase current QualityofService is CS_ERROR and tolerance timeout has elapsed or the PhaseCurrents have latent failure and MotorController is not operating.
• EPASTS_a175 — Exch Flash Stored Config Err EPASTS_a175_exchFlashStoredConfigErr This alert is reported when ALM7[31] Flash Stored Configuration Error alarm
• EPASTS_a176 — Exch Cpu1 Exception Reset EPASTS_a176_exchCpu1ExceptionReset This alert is reported in case a reset is caused by exception on core1.
• EPASTS_a177 — Etsr Invalidated EPASTS_a177_etsrInvalidated This alert is reported when the ElapsedTimeSinceReset (ETSR) counter becomes greater than the ETSR_THRESHOLD_TIMESTAMP and counter forced to 0xFFFFFFFF
• EPASTS_a178 — Exch Wdt Exception EPASTS_a178_exchWdtException This alert is reported by the ExceptionHandler_TC3x (EXCH) component when there is a watchdog timeout exception.
• EPASTS_a179 — Ted Motorcoil Temp Checker EPASTS_a179_tedMotorcoilTempChecker This alert is reported when there is a motor overtemperature. Degradation parameters/estimator shall be checked, if those are correct, HW failure.
• EPASTS_a180 — Dm Deadline Violation C1 EPASTS_a180_dmDeadlineViolationC1 This alert is reported by the Deadline Monitor (DM) when at least one of the monitored tasks didn't finish or finished multiple times during its configured time frame on Core 1.
• EPASTS_a181 — Dm Deadline Violation C1 EPASTS_a181_dmDeadlineViolationC1 This alert is reported by the DeadlineMonitor (DM) if the elapsed time between two 250us task starts is out of the tolerated range on Core 1 then Safety Reset is initiated.
• EPASTS_a182 — Mcd Input Mia EPASTS_a182_mcdInputMia This alert is reported by the MotorControlDiagnostics_R12 (MCD) component if MTCControlSignal age reached the diagnostic limit.
• EPASTS_a183 — Sbch Comm Err Sbc To Mcu EPASTS_a183_sbchCommErrSbcToMcu This alert is reported by the SystemBasisChipHAL_A8140x (SBCH) component SBC if the communication check (SBC -> MCU) fails. Against random HW failures of the MCU and communication line including EMC.
• EPASTS_a184 — Sbcm Comm Buffer Overflow EPASTS_a184_sbcmCommBufferOverflow This alert is reported in case SBC Communication buffer overflow checker. Against systematic SW failures on SystemBasisChipManager component.
• EPASTS_a185 — Sbcscp QA Watchdog Reset EPASTS_a185_sbcscpQAWatchdogReset This alert is reported by the SBCStartupCauseProvider_A8140x (SBCSCP) component if external question-answer watchdog (Q&A) fails. MCU SM requires it, against systematic SW faults, and random HW faults of the time base.
• EPASTS_a186 — Wdh Comm Buffer Overflow EPASTS_a186_wdhCommBufferOverflow This alert is reported by the WatchdogHandler_A8140x (WDH) component in case SBC Communication buffer overflow checker. Against systematic SW failures on WatchdogHandler component.
• EPASTS_a187 — Epm Volt Fail EPASTS_a187_epmVoltFail This alert is reported by the ExternalPowerManager_A8140x (EPM) component in case of Undervoltage and Overvoltage on the V5P1 (TSU) and V5A (Communication) supplies. This diagnostics is used for root cause detection.
• EPASTS_a188 — Epm Comm Buffer Overflow EPASTS_a188_epmCommBufferOverflow This alert is reported by the ExternalPowerManager_A8140x (EPM) component in case SBC Communication buffer overflow checker. Against systematic SW failures on ExternalPowerManager component.
• EPASTS_a189 — Sbch Comm Err Mcu To Sbc EPASTS_a189_sbchCommErrMcuToSbc This alert is reported by the SystemBasisChipHAL_A8140x (SBCH) component in case SBC communication check (MCU -> SBC) fails. Against random HW failures of the MCU and communication line including EMC.
• EPASTS_a190 — Sbch Comm Buffer Overflow EPASTS_a190_sbchCommBufferOverflow This alert is reported in case SBC Communication buffer overflow checker. Against systematic SW failures on SystemBasisChipHAL component.
• EPASTS_a191 — Sbcscp Vcp2 Vuc Volt Fail EPASTS_a191_sbcscpVcp2VucVoltFail This alert is reported by the SBCStartupCauseProvider_A8140x (SBCSCP) component in case of MCU I/O power supply (VDD_IO) monitor by SBC and under/over voltage on the second charge pump. Against power supply faults of the main microcontroll…
• EPASTS_a192 — Osum C0 Csa Near Full EPASTS_a192_osumC0CsaNearFull This alert is reported by the OnlineStackUsageMonitor_R12 (OSUM) componen twhen context switch area usage on core 0 is almost full.
• EPASTS_a193 — Osum C0 Stack Near Full EPASTS_a193_osumC0StackNearFull This alert is reported by the OnlineStackUsageMonitor_R12 (OSUM) component when stack usage on core 0 is almost full.
• EPASTS_a194 — Am Nvdata Loss EPASTS_a194_amNvdataLoss This alert is reported when the Actuator Manager (AM) NvM Health status may be corrupted
• EPASTS_a195 — Imcm Comm Err C1 EPASTS_a195_imcmCommErrC1 This alert is reported by the IMCM_C1 (IMCM) component in case Inter-MCU comm failure or the other side is not communicating (UV or other failure).
• EPASTS_a196 — Top Eol Tas Offset Invalid EPASTS_a196_topEolTasOffsetInvalid This alert is reported by the TASOffsetProvider_Generic (TOP) component in case of tas offset calibration data failure.
• EPASTS_a197 — Difp Difactor Invalid EPASTS_a197_difpDifactorInvalid This alert is reported by the DIFactorProvider_Generic (DIFP) component in case of DI factor Calibration data failure.
• EPASTS_a198 — Osum C1 Csa Near Full EPASTS_a198_osumC1CsaNearFull This alert is reported by the OnlineStackUsageMonitor_R12 (OSUM) component when context switch area (CSA) stack usage on core 1 is almost full.
• EPASTS_a199 — Osum C1 Stack Near Full EPASTS_a199_osumC1StackNearFull This alert is reported by the OnlineStackUsageMonitor_R12 (OSUM) component when stack usage on core 1 is almost full.
• EPASTS_a200 — Amm Input Buffer Overflow EPASTS_a200_ammInputBufferOverflow This alert is reported by the ApplicationManagerProxy_Generic (AMM) component if between two executions the applications send more than 10 application management messages to port LocalManagementMessages. The alert will not be cleared.