Secondary electric power-assisted steering alerts
Browse 270 EPASTS alert codes and open an entry for its description and recorded conditions.
EPASTS alert codes
Showing 201–250 of 270
- EPASTS_a201 — Amm Output Buffer Overflow EPASTS_a201_ammOutputBufferOverflow This alert is reported by the ApplicationManagerProxy_Generic (AMM) component if it receives too many application management messages at port LocalManagementMessages for the remote MCU in a short time
- EPASTS_a202 — Ohnvmp Stored Offset Lost EPASTS_a202_ohnvmpStoredOffsetLost This alert is reported by the OffsetHandlerNvmProxy_Generic (OHNVMP) component if there is a problem in reading/storing the learned steering position offsets data on the NvM.
- EPASTS_a203 — Ctc Interface Err EPASTS_a203_ctcInterfaceErr This alert is reported by the ColumnTorqueController_R12 (CTC) component when there is a problem with one of the necessary inputs of the column torque controller. Column Torque Controller is not able to calculate assist torque.
- EPASTS_a204 — Fdp Prev Trq Err EPASTS_a204_fdpPrevTrqErr This alert is reported by the FdrActiveDetectionPrevention_R12 (FDP) component if there is a problem with the active prevention torque of the freezing detection feature.
- EPASTS_a205 — Fdr Ocl Fail EPASTS_a205_fdrOclFail This alert is reported by the Output Control Logic (OCL) of the FdrDetectionManager_R12 (FDR) component when the necessary signals for freezing and retention detection are not available.
- EPASTS_a206 — Fdr Ocl Partial Blocking EPASTS_a206_fdrOclPartialBlocking This alert is reported by the Output Control Logic (OCL) of the FdrDetectionManager_R12 (FDR) when a partial blocking is detected.
- EPASTS_a207 — Fdr Ocl Freezing EPASTS_a207_fdrOclFreezing This alert is reported by the Output Control Logic (OCL) of the FdrDetectionManager_R12 (FDR) when freezing is detected.
- EPASTS_a208 — Fdr Low Severity Blocking EPASTS_a208_fdrLowSeverityBlocking This alert is reported by the FdrDetectionManager_R12 (FDR) component when a low severity blocking due to freezing is detected at low vehicle speed. If the vehicle speed goes higher it can lead to a FDR_OCL_PARTIAL_BLOCKING alert.
- EPASTS_a209 — Fdr Low Severity Freezing EPASTS_a209_fdrLowSeverityFreezing This alert is reported by the FdrDetectionManager_R12 (FDR) component when a low severity freezing is detected at low vehicle speed. If the vehicle speed goes higher it can lead to a FDR_OCL_FREEZING alert.
- EPASTS_a210 — Fdr Total Blocking EPASTS_a210_fdrTotalBlocking This alert is reported by the FdrDetectionManager_R12 (FDR) component when a total blocking due to freezing is detected.
- EPASTS_a211 — Frm Internal Err EPASTS_a211_frmInternalErr This alert is reported by the FrictionManager_R12 (FRM) component if there is a problem with one of the necessary inputs of the friction manager
- EPASTS_a212 — Frm Data Lost EPASTS_a212_frmDataLost This alert is reported by the FrictionManager_R12 (FRM) component if there is any friction management data lost.
- EPASTS_a213 — Frm High Friction Detected EPASTS_a213_frmHighFrictionDetected This alert is reported by the FrictionManager_R12 (FRM) component when high friction is detected.
- EPASTS_a214 — Vel Interface Err EPASTS_a214_velInterfaceErr This alert is reported by the VirtualEndLock_R12 (VEL) component if there is a problem with one of the necessary inputs of the virtual end-lock.
- EPASTS_a215 — Vsg Safe Viol Err EPASTS_a215_vsgSafeViolErr This alert is reported by the VibrationSignalGenerator_R12 (VSG) compobebt if a safety check for the vibration signal (lane keeping warning) torque request fails.
- EPASTS_a216 — Isdg Improper Shutdown EPASTS_a216_isdgImproperShutdown This alert is reported by the ImproperShutdownDetector_Generic (ISDG) component if improper shutdown is detected.
- EPASTS_a217 — Msd Master Silent Err EPASTS_a217_msdMasterSilentErr This alert is reported by the MasterSilentDecition_T222 (MSD) component if there is a problem with the master-silent decision, i.e. both sides are master or both sides are silent.
- EPASTS_a218 — Aad Application State Err EPASTS_a218_aadApplicationStateErr This alert is reported when the current ECU side is not capable of assist torque calculation
- EPASTS_a219 — Frh Fast Restart Failed EPASTS_a219_frhFastRestartFailed This alert is reported by the FastRestartHandler_R12 (FRH) component when the fast restart has failed.
- EPASTS_a220 — Transceiver Inputqueue Overflow EPASTS_a220_transceiverInputqueueOverflow This alert is reported on secondary side only when the internal input queue for secondary side errors overflowed
- EPASTS_a221 — Aps Cnt Error EPASTS_a221_apsCntError Invalid APS_eacMonitorCounter value received
- EPASTS_a222 — Aps Cs Error EPASTS_a222_apsCsError Invalid APS_eacMonitorChecksum value received
- EPASTS_a223 — Aps Mia EPASTS_a223_apsMia APS_eacMonitor message not received
- EPASTS_a224 — Das Cnt Error EPASTS_a224_dasCntError Invalid DAS_steeringControlCounter value received
- EPASTS_a225 — Das Cs Error EPASTS_a225_dasCsError Invalid DAS_steeringControlChecksum value received
- EPASTS_a226 — Das Mia EPASTS_a226_dasMia DAS_steeringControl message not received
- EPASTS_a227 — Dir Torque Cnt Error EPASTS_a227_dirTorqueCntError Invalid DIR_torqueCounter value received
- EPASTS_a228 — Dir Torque Cs Error EPASTS_a228_dirTorqueCsError Invalid DIR_torqueChecksum value received
- EPASTS_a229 — Dir Torque Mia EPASTS_a229_dirTorqueMia The electric power assist steering (EPAS) Electronic Control Unit (ECU) is not receiving the drive inverter torque message, which may be the result of controller area network (CAN) bus issues.
- EPASTS_a230 — Di Spd Cnt Error EPASTS_a230_diSpdCntError Invalid DI_speedCounter value received
- EPASTS_a231 — Di Spd Cs Error EPASTS_a231_diSpdCsError Invalid DI_speedChecksum value received
- EPASTS_a232 — Di Spd Mia EPASTS_a232_diSpdMia DI_speed - backup vehicle speed - message not received.
- EPASTS_a233 — Ecu1 Stat Cnt Error EPASTS_a233_ecu1StatCntError Invalid EPAS3P_statusCounter value received
- EPASTS_a234 — Ecu1 Stat Cs Error EPASTS_a234_ecu1StatCsError The Electronic Power Assist Steering (EPAS) electronic control unit (ECU) receives invalid controller area network (CAN) messages from the car computer on the CAN bus.
- EPASTS_a235 — Ecu1 Stat Mia EPASTS_a235_ecu1StatMia EPAS3P_status message not received
- EPASTS_a236 — Esp Wr Cnt Error EPASTS_a236_espWrCntError Invalid ESP_wheelRotationCounter value received
- EPASTS_a237 — Esp Wr Cs Error EPASTS_a237_espWrCsError Invalid ESP_wheelRotationChecksum value received
- EPASTS_a238 — Esp Wr Mia EPASTS_a238_espWrMia The electric power assist steering (EPAS) Electronic Control Unit (ECU) is not receiving the wheel rotation message, resulting in a reduced amount of steering assist to preserve vehicle stability.
- EPASTS_a239 — Esp Ws Cnt Error EPASTS_a239_espWsCntError Invalid ESP_wheelSpeedsCounter value received
- EPASTS_a240 — Esp Ws Cs Error EPASTS_a240_espWsCsError Invalid ESP_wheelSpeedsChecksum value received
- EPASTS_a241 — Esp Ws Mia EPASTS_a241_espWsMia The electric power assist steering (EPAS) Electronic Control Unit (ECU) is not receiving the wheel speeds message, resulting in a reduced amount of steering assist to preserve vehicle stability.
- EPASTS_a242 — Gtw Config Mia EPASTS_a242_gtwConfigMia GTW_carConfig message not received
- EPASTS_a243 — Rcm Cnt Error EPASTS_a243_rcmCntError The Electronic Power Assist Steering (EPAS) electronic control unit (ECU) receives invalid controller area network (CAN) messages from the Restraint Control Module (RCM) on the CAN bus.
- EPASTS_a244 — Rcm Cs Error EPASTS_a244_rcmCsError The Electronic Power Assist Steering (EPAS) electronic control unit (ECU) receives invalid controller area network (CAN) messages from the Restraint Control Module (RCM) on the CAN bus.
- EPASTS_a245 — Rcm Mia EPASTS_a245_rcmMia The Electric Power Assist Steering (EPAS) electronic control unit (ECU) is not receiving the expected controller area network (CAN) messages from the Restraint Control Module (RCM) on the CAN bus.
- EPASTS_a246 — Sccm Cnt Error EPASTS_a246_sccmCntError Invalid SCCM_steeringAngleSensorCounter value received
- EPASTS_a247 — Sccm Cs Error EPASTS_a247_sccmCsError Invalid SCCM_steeringAngleSensorCrc value received
- EPASTS_a248 — Sccm Mia EPASTS_a248_sccmMia SCCM_steeringAngleSensor message not received
- EPASTS_a249 — Ui Tune Req Cnt Error EPASTS_a249_uiTuneReqCntError Invalid UI_chassisControlCounter value received
- EPASTS_a250 — Ui Tune Req Cs Error EPASTS_a250_uiTuneReqCsError Invalid UI_chassisControlChecksum value received