Rear-right door vehicle controller alerts
Browse 136 VCDOORRR alert codes and open an entry for its description and recorded conditions.
VCDOORRR alert codes
Showing 51–100 of 136
- VCDOORRR_a103 — CP MIA VCDOORRR_a103_CP_MIA One or more of the messages the vehicle controller receives periodically from the charge port (CP) electronic control unit (ECU) is not received, indicating the CP ECU may be unavailable (MIA).
- VCDOORRR_a104 — DAS MIA VCDOORRR_a104_DAS_MIA One or more of the expected CAN messages from DAS were not received.
- VCDOORRR_a105 — TAS MIA VCDOORRR_a105_TAS_MIA One or more of the messages the vehicle controller receives periodically from the Tesla Air Suspension (TAS) electronic control unit (ECU) is not received, indicating the TAS ECU may be unavailable (MIA).
- VCDOORRR_a106 — PCS MIA VCDOORRR_a106_PCS_MIA One or more of the messages the vehicle controller receives periodically from the power conversion system (PCS) electronic control unit (ECU) is not received, indicating the PCS ECU may be unavailable (MIA).
- VCDOORRR_a107 — BMS MIA VCDOORRR_a107_BMS_MIA One or more of the messages the vehicle controller receives periodically from the high voltage (HV) Battery Management System (BMS) electronic control unit (ECU) is not received, indicating the BMS ECU may be unavailable (MIA).
- VCDOORRR_a108 — DIF MIA VCDOORRR_a108_DIF_MIA One or more of the messages the vehicle controller receives periodically from the front drive inverter (DIF) electronic control unit (ECU) is not received, indicating the DIF ECU may be unavailable (MIA).
- VCDOORRR_a109 — RCM MIA VCDOORRR_a109_RCM_MIA One or more of the messages the vehicle controller receives periodically from the Restraint Control Module (RCM) is not received, indicating the RCM may be unavailable (MIA).
- VCDOORRR_a110 — GTW MIA VCDOORRR_a110_GTW_MIA One or more expected Controller Area Network (CAN) messages from the vehicle gateway (GTW) was not received. Vehicle functions that depend on CAN messages from the GTW may be unavailable, or their performance may be affected.
- VCDOORRR_a111 — EPBR MIA VCDOORRR_a111_EPBR_MIA One or more of the messages the vehicle controller receives periodically from the right Electronic Park Brake (EPBR) electronic control unit (ECU) is not received, indicating the EPBR ECU may be unavailable (MIA).
- VCDOORRR_a112 — EPBL MIA VCDOORRR_a112_EPBL_MIA One or more of the messages the vehicle controller receives periodically from the left Electronic Park Brake (EPBL) electronic control unit (ECU) is not received, indicating the EPBL ECU may be unavailable (MIA).
- VCDOORRR_a113 — UI MIA VCDOORRR_a113_UI_MIA One or more of the expected CAN messages from UI were not received.
- VCDOORRR_a114 — ESP MIA VCDOORRR_a114_ESP_MIA One or more expected Controller Area Network (CAN) messages from the Electronic Stability Program (ESP) electronic control unit (ECU) was not received. Stability and traction control functions may be unavailable, or their performance may b…
- VCDOORRR_a115 — VCSEC MIA VCDOORRR_a115_VCSEC_MIA One or more of the messages the vehicle controller receives periodically from the vehicle security controller (VCSEC) is not received, indicating the VCSEC may be unavailable (MIA).
- VCDOORRR_a116 — VCRIGHT MIA VCDOORRR_a116_VCRIGHT_MIA One or more of the messages the vehicle controller receives periodically from the right vehicle controller (VCRIGHT) is not received, indicating the VCRIGHT may be unavailable (MIA).
- VCDOORRR_a117 — VCLEFT MIA VCDOORRR_a117_VCLEFT_MIA One or more of the messages the vehicle controller receives periodically from the left vehicle controller (VCLEFT) is not received, indicating the VCLEFT may be unavailable (MIA).
- VCDOORRR_a118 — VCFRONT MIA VCDOORRR_a118_VCFRONT_MIA One or more of the messages the vehicle controller receives periodically from the front vehicle controller (VCFRONT) is not received, indicating the VCFRONT may be unavailable (MIA).
- VCDOORRR_a119 — SCCM MIA VCDOORRR_a119_SCCM_MIA One or more of the messages the vehicle controller receives periodically from the Steering Column Control Module (SCCM) is not received, indicating the SCCM may be unavailable (MIA).
- VCDOORRR_a120 — DI DRIVE MIA VCDOORRR_a120_DI_DRIVE_MIA One or more of the messages the vehicle controller receives periodically from the drive interface (DI) electronic control unit (ECU) is not received while the vehicle is in Drive, indicating the DI ECU may be unavailable (MIA).
- VCDOORRR_a121 — eFuse Management Continuous16 V VCDOORRR_a121_eFuseManagementContinuous16V Unexpected voltage seen on continuous device outputs
- VCDOORRR_a122 — eFuse Management Non Continuous16 V VCDOORRR_a122_eFuseManagementNonContinuous16V Unexpected voltage seen on non-continuous device outputs
- VCDOORRR_a150 — Window Pinch VCDOORRR_a150_windowPinch Window pinch event detected
- VCDOORRR_a152 — Window Uncal VCDOORRR_a152_windowUncal Window is not calibrated
- VCDOORRR_a154 — Window Thermal VCDOORRR_a154_windowThermal Window thermal protection mode engaged
- VCDOORRR_a156 — Window No Input VCDOORRR_a156_windowNoInput Window thermal protection mode is activated and user input was attempted, but blocked
- VCDOORRR_a158 — Window Pinch Overide VCDOORRR_a158_windowPinchOveride Window pinch detection has been overriden by holding the auto-up window switch.
- VCDOORRR_a160 — Window Undercurrent VCDOORRR_a160_windowUndercurrent Window current is less than expected while the window is driven.
- VCDOORRR_a162 — Window Encoder Stall VCDOORRR_a162_windowEncoderStall Window encoder ticks not seen while the front window motor is being driven: This suggests something is disconnected, shorted, or the controller voltage supply for the encoders is < 9V
- VCDOORRR_a164 — Window Factory Test VCDOORRR_a164_windowFactoryTest Window factory test has been run
- VCDOORRR_a165 — Window Factory Test2 VCDOORRR_a165_windowFactoryTest2 Window factory test has been run
- VCDOORRR_a166 — Window Debug VCDOORRR_a166_windowDebug Window diagnostics event - debug only
- VCDOORRR_a167 — Window Debug Pinch VCDOORRR_a167_windowDebugPinch Window Debug
- VCDOORRR_a169 — Window Current Peak VCDOORRR_a169_windowCurrentPeak Peak in window current during travel
- VCDOORRR_a175 — Window Seal Defect VCDOORRR_a175_windowSealDefect The pinch algorithm detected a seal defect during the second rollup of calibration. Window seals / glass / door fitment may need adjustment to allow smoother window rolling.
- VCDOORRR_a180 — Door Latch Rehome VCDOORRR_a180_doorLatchRehome The door latch had to be rehomed because of an unexpected movement in the latch's release motor.
- VCDOORRR_a182 — Emergency Latch Rel VCDOORRR_a182_emergencyLatchRel The mechanical release was used to open the door.
- VCDOORRR_a186 — Latch Release Failed VCDOORRR_a186_latchReleaseFailed Door does not open when requested due to the latch not releasing when expected
- VCDOORRR_a188 — Latch Unable To Rearm VCDOORRR_a188_latchUnableToRearm Door latch release cam cannot find home position
- VCDOORRR_a200 — Motor Phantom Encoder VCDOORRR_a200_motorPhantomEncoder Motor encoders are moving without motor being driven
- VCDOORRR_a201 — Motor Duty Enc Disabl VCDOORRR_a201_motorDutyEncDisabl Motor is being driven, but encoders are locked
- VCDOORRR_a202 — IMU Fault Detected VCDOORRR_a202_IMUFaultDetected The vehicle controller has detected a condition affecting Inertial Measurement Unit (IMU) functionality, triggering the IMU recovery process.
- VCDOORRR_a204 — Undervoltage Loadshed Triggered VCDOORRR_a204_undervoltageLoadshedTriggered VCDOOR detected that the 48V bus was undervoltage while the vehicle was in drive or not parked, loadshedding has been triggered
- VCDOORRR_a218 — Motor Driver Fault VCDOORRR_a218_motorDriverFault Motor driver has pulled its nFault pin low
- VCDOORRR_a219 — Motor Current Dropout VCDOORRR_a219_motorCurrentDropout Some motor current readings are unreliable
- VCDOORRR_a239 — Nxppca9539 Fault VCDOORRR_a239_nxppca9539Fault Unexpected fault in a PCA9539 chip
- VCDOORRR_a250 — Network Switch TX Persist Timeout VCDOORRR_a250_networkSwitchTXPersistTimeout While the switch was being persisted the recieving node was never detected and the max time to persist the switch state was reached
- VCDOORRR_a251 — Network Switch TX Debug VCDOORRR_a251_networkSwitchTXDebug Returns the time the transmitter waited for the recieve to come up
- VCDOORRR_a259 — Latch Disarm Delay VCDOORRR_a259_latchDisarmDelay Latch took longer than expected to release
- VCDOORRR_a265 — Can Rx Checksum Error VCDOORRR_a265_canRxChecksumError Software detected a checksum error
- VCDOORRR_a280 — Latch Did Not Disarm VCDOORRR_a280_latchDidNotDisarm Latch should report disarmed during release
- VCDOORRR_a282 — Latch Unexpected Arm VCDOORRR_a282_latchUnexpectedArm Latch reported rearming while releasing