VCDOORRR_a110 — GTW MIA

Full alert identifier: VCDOORRR_a110_GTW_MIA

Alert description

One or more expected Controller Area Network (CAN) messages from the vehicle gateway (GTW) was not received. Vehicle functions that depend on CAN messages from the GTW may be unavailable, or their performance may be affected.

Potential impact

Vehicle functions that depend on CAN messages from the vehicle gateway (GTW) may be unavailable, or their performance may be affected.

Set condition

An expected CAN message from the vehicle gateway (GTW) has not been received within the expected timeout, or the message drop rate is too high while the GTW is CAN active. The GTW is considered CAN active when VCFRONT_vehGoToSleep is 0.

Clear condition

All expected CAN messages from the vehicle gateway (GTW) are received, or the GTW is CAN inactive.

Signals to check

These diagnostic fields are associated with VCDOORRR_a110. Check the alert's Alert Log in Service Mode Plus for available values.

Signal	Unit
CH Airbag Cutoff Status `VCDOORRR_a110_CH_airbagCutoffStatus`	—
CH Car Config `VCDOORRR_a110_CH_carConfig`	—
CH Car State `VCDOORRR_a110_CH_carState`	—
CH Ch Nm `VCDOORRR_a110_CH_chNm`	—
CH Epoch Time Gtw `VCDOORRR_a110_CH_epochTimeGtw`	—
CH Vin `VCDOORRR_a110_CH_vin`	—
VEH Bmp Debug `VCDOORRR_a110_VEH_bmpDebug`	—
VEH Can Log Availability `VCDOORRR_a110_VEH_canLogAvailability`	—

Show 8 more fields

Signal	Unit
VEH Car Config `VCDOORRR_a110_VEH_carConfig`	—
VEH Car State `VCDOORRR_a110_VEH_carState`	—
VEH Gear Control `VCDOORRR_a110_VEH_gearControl`	—
VEH Mismatch Fault `VCDOORRR_a110_VEH_mismatchFault`	—
VEH Time `VCDOORRR_a110_VEH_time`	—
VEH Update Status `VCDOORRR_a110_VEH_updateStatus`	—
VEH Veh Nm `VCDOORRR_a110_VEH_vehNm`	—
VEH Vin `VCDOORRR_a110_VEH_vin`	—

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of VCDOORRR_a110.