Rear-left drive inverter alerts
Browse 152 DIREL alert codes and open an entry for its description and recorded conditions.
DIREL alert codes
Showing 1–50 of 152
- DIREL_a001 — Hw Phase Agate Drive DIREL_a001_hwPhaseAgateDrive The Drive Inverter (DIx) has detected a condition affecting functionality at the gate driver on Phase A.
- DIREL_a002 — Hw Phase Bgate Drive DIREL_a002_hwPhaseBgateDrive The Drive Inverter (DIx) has detected a condition affecting functionality at the gate driver on Phase B.
- DIREL_a003 — Hw Phase Cgate Drive DIREL_a003_hwPhaseCgateDrive The Drive Inverter (DIx) has detected a condition affecting functionality at the gate driver on Phase C.
- DIREL_a004 — Hw Phase Apeak DIREL_a004_hwPhaseApeak Drive Inverter Warning: Phase A peak over current detected in hardware
- DIREL_a005 — Hw Phase Bpeak DIREL_a005_hwPhaseBpeak The Drive Inverter (DIx) current sensor hardware comparator has detected an overcurrent event (or peak) on Phase B.
- DIREL_a006 — Hw Phase Cpeak DIREL_a006_hwPhaseCpeak The Drive Inverter (DIx) current sensor hardware comparator has detected an overcurrent event (or peak) on Phase C.
- DIREL_a007 — Stator Anomaly Detected DIREL_a007_statorAnomalyDetected Drive Inverter Warning: Motor stator anomaly detected
- DIREL_a008 — Hw Encoder A DIREL_a008_hwEncoderA Drive Inverter Warning: Track A Disconnected
- DIREL_a009 — Hw Encoder B DIREL_a009_hwEncoderB Drive Inverter Warning: Track B disconnected
- DIREL_a010 — Unintended Reset DIREL_a010_unintendedReset The drive interface (DI) or drive inverter (DIx) electronic control unit (ECU) resets for an unintended reason, such as a watchdog timeout.
- DIREL_a011 — Sw Power Stage Not Ready DIREL_a011_swPowerStageNotReady The Drive Inverter (DIx) power stage is not ready. There may be a condition affecting the DIx control board.
- DIREL_a012 — Hvil Not Closed DIREL_a012_hvilNotClosed Drive Inverter Warning: HVIL not CLOSED
- DIREL_a013 — Ecc Error DIREL_a013_eccError The drive interface (DI) or drive inverter (DIx) electronic control unit (ECU) detects a RAM read or embedded conveyor controller (ECC) flash fetch issue.
- DIREL_a014 — Active Damping DIREL_a014_activeDamping The Drive Inverter (DIx) Electronic Control Unit (ECU) has detected an error with Active Driveline Damping (ADD).
- DIREL_a015 — Mech Safe State Anomaly DIREL_a015_mechSafeStateAnomaly Diagnostic alert for software trigger of mechanical two phase open
- DIREL_a016 — Safe State Applied DIREL_a016_safeStateApplied The Drive Inverter (DIx) power stage has applied a safe state.
- DIREL_a017 — Hw Pedal Monitor DIREL_a017_hwPedalMonitor The drive interface (DI) or drive inverter (DIx) electronic control unit (ECU) detects a condition that leads to the pedal monitor (PM) disabling powertrain.
- DIREL_a018 — Hw LV Supply UV DIREL_a018_hwLVSupplyUV The drive interface (DI) or drive inverter (DIx) electronic control unit (ECU) detects a low voltage (LV) battery undervoltage event.
- DIREL_a020 — Hw Motor Encoder DIREL_a020_hwMotorEncoder Drive Inverter Warning: Motor encoder error detected in hardware
- DIREL_a021 — Hw Bus OV DIREL_a021_hwBusOV Drive Inverter Warning: Battery over voltage detected in hardware
- DIREL_a022 — Hw5v Supply UV DIREL_a022_hw5vSupplyUV The drive interface (DI) or drive inverter (DIx) electronic control unit (ECU) detects a 5V supply is under voltage.
- DIREL_a024 — Self Test DIREL_a024_selfTest The Switch Off Path Test (SOPT) for Drive Unit has failed. The pathway between Drive Inverter (DIx) and Pedal Monitor (PM) torque measurements are different.
- DIREL_a025 — Phase Apeak DIREL_a025_phaseApeak The Drive Inverter (DIx) Electronic Control Unit (ECU) has detected an overcurrent event (or peak) in Phase A.
- DIREL_a026 — Phase Bpeak DIREL_a026_phaseBpeak The Drive Inverter (DIx) Electronic Control Unit (ECU) has detected an overcurrent event (or peak) in Phase B.
- DIREL_a027 — Phase Cpeak DIREL_a027_phaseCpeak The Drive Inverter (DIx) Electronic Control Unit (ECU) has detected an overcurrent event (or peak) in Phase C.
- DIREL_a028 — Phase Arms DIREL_a028_phaseArms The Drive Inverter (DIx) Electronic Control Unit (ECU) has detected the current sensor Root Mean Squared (RMS) current has exceeded the expected RMS threshold on Phase A.
- DIREL_a029 — Phase Brms DIREL_a029_phaseBrms The Drive Inverter (DIx) Electronic Control Unit (ECU) has detected the current sensor Root Mean Squared (RMS) current has exceeded the expected RMS threshold on Phase B.
- DIREL_a030 — Phase Crms DIREL_a030_phaseCrms The Drive Inverter (DIx) Electronic Control Unit (ECU) has detected the current sensor Root Mean Squared (RMS) current has exceeded the expected RMS threshold on Phase C.
- DIREL_a031 — Phase Acurrent Offset DIREL_a031_phaseAcurrentOffset The Drive Inverter (DIx) Electronic Control Unit (ECU) has detected the current sensor offset has exceeded the threshold on Phase A.
- DIREL_a032 — Phase Bcurrent Offset DIREL_a032_phaseBcurrentOffset The Drive Inverter (DIx) Electronic Control Unit (ECU) has detected the current sensor offset has exceeded the threshold on Phase B.
- DIREL_a033 — Phase Acurrent Sensor DIREL_a033_phaseAcurrentSensor The Drive Inverter (DIx) Phase A current sensor is irrational.
- DIREL_a034 — Phase Bcurrent Sensor DIREL_a034_phaseBcurrentSensor The Drive Inverter (DIx) Phase B current sensor is irrational.
- DIREL_a035 — Phase Current Balance DIREL_a035_phaseCurrentBalance Drive Inverter Warning: Phase current imbalance
- DIREL_a036 — Bus OV DIREL_a036_busOV Drive Inverter Warning: Battery over voltage detected in software
- DIREL_a037 — Bus UV DIREL_a037_busUV Drive Inverter Warning: Battery under voltage
- DIREL_a038 — Bus Vsensor DIREL_a038_busVsensor Drive Inverter Warning: Battery sensor bad
- DIREL_a041 — Sdc MIA DIREL_a041_sdcMIA Drive Inverter Warning: The Secondary Disconnect Controller (SDC) is not communicating to the Drive Inverter (DI), or there is an interface version mismatch. Service is needed.
- DIREL_a042 — Inlet Sensor DIREL_a042_inletSensor Drive Inverter Warning: Inlet sensor bad
- DIREL_a043 — Outlet OT DIREL_a043_outletOT Drive Inverter Warning: Outlet over temperature
- DIREL_a044 — Outlet UT DIREL_a044_outletUT Drive Inverter Warning: Outlet under temperature
- DIREL_a045 — Outlet Sensor DIREL_a045_outletSensor Drive Inverter Warning: Outlet sensor bad
- DIREL_a046 — Stator OT DIREL_a046_statorOT Drive Inverter Warning: Stator over temperature
- DIREL_a047 — Stator Sensor1 DIREL_a047_statorSensor1 Drive Inverter Warning: Stator sensor 1 bad
- DIREL_a048 — Stator Sensor2 DIREL_a048_statorSensor2 Drive Inverter Warning: Stator sensor 2 bad
- DIREL_a049 — Stator Sensor Diff DIREL_a049_statorSensorDiff Drive Inverter Warning: Stator sensor 2 bad
- DIREL_a050 — No Stator Sensor DIREL_a050_noStatorSensor Drive Inverter Warning: No Stator sensor available
- DIREL_a051 — Dflk MIA DIREL_a051_dflkMIA Drive Inverter Warning: Differential Locker (DFLK) CAN message aren't properly received
- DIREL_a053 — Unexpected Latch State DIREL_a053_unexpectedLatchState Drive Inverter Warning: Hardware latched fault response in an unexpected state
- DIREL_a054 — Drive Inverter OT DIREL_a054_driveInverterOT Drive Inverter Warning: Inverter over temperature
- DIREL_a055 — Trq Cross Check DIREL_a055_trqCrossCheck The Drive Inverter (DIx) and Pedal Monitor (PM) estimate different amounts of torque production, causing a Cross Check mismatch.