Pedal monitor alerts
Browse 98 PM alert codes and open an entry for its description and recorded conditions.
PM alert codes
Showing 1–50 of 98
- PM_a001 — Absolute Torque PM_a001_absoluteTorque Pedal Monitor Warning: Absolute Torque.
- PM_a002 — Excessive Accel Torque PM_a002_excessiveAccelTorque Pedal Monitor Warning: Accumulated Torque.
- PM_a003 — Excessive Reversal Torque PM_a003_excessiveReversalTorque Pedal Monitor Warning: Torque Reversal.
- PM_a004 — Excessive Decel Torque PM_a004_excessiveDecelTorque Pedal Monitor Warning: Deceleration Torque.
- PM_a005 — Torque In Neutral Or Park PM_a005_torqueInNeutralOrPark Pedal Monitor Warning: Torque Detected in non-torque producing gear.
- PM_a006 — Inconsistent DI Gear PM_a006_inconsistentDIGear Pedal Monitor Warning: PM Gear Mismatch.
- PM_a007 — Ibst MIA PM_a007_ibstMIA Pedal Monitor (PM) has detected iBooster (IBST) node is MIA on Controller Area Network (CAN) for one or multiple messages.
- PM_a008 — Memory Error PM_a008_memoryError Pedal Monitor Warning: Memory corruption detected.
- PM_a009 — Esp MIA PM_a009_espMIA Pedal Monitor Warning: ESP CAN node is missing.
- PM_a010 — Di MIA PM_a010_diMIA Pedal Monitor Warning: DI CAN node is missing.
- PM_a011 — System Hvil Not Closed PM_a011_systemHvilNotClosed Pedal Monitor Warning: System HVIL not CLOSED
- PM_a012 — Can Data Bus A PM_a012_canDataBusA Pedal Monitor Warning: Secondary CAN Integrity Check Failed.
- PM_a013 — Can Hardware Bus A PM_a013_canHardwareBusA Pedal Monitor Warning: CAN hardware error.
- PM_a014 — Accel Pedal Error PM_a014_accelPedalError Pedal Monitor Warning: Accelerator Pedal Error.
- PM_a015 — Shifter MIA PM_a015_shifterMIA Pedal Monitor Warning: Gear Shifter CAN node is missing.
- PM_a016 — Excessive Torque Delta PM_a016_excessiveTorqueDelta Pedal Monitor Warning: Excessive torque rate delta.
- PM_a017 — Brake MIA PM_a017_brakeMIA Pedal Monitor Warning: Parking Brake CAN node is missing.
- PM_a018 — Offroad Speed Control Inhibit PM_a018_offroadSpeedControlInhibit Pedal Monitor Warning: Crawl and Hill Descent modules inhibited.
- PM_a019 — Vehicle Speed QF Diagnostic PM_a019_vehicleSpeedQFDiagnostic Pedal Monitor Warning: Vehicle speed monitor tripped (logging for development).
- PM_a021 — Dif MIA PM_a021_difMIA Pedal Monitor Warning: DIF CAN node MIA
- PM_a022 — Dir MIA PM_a022_dirMIA Pedal Monitor Warning: DIR CAN node MIA
- PM_a023 — Cruise Inhibit PM_a023_cruiseInhibit Pedal Monitor Warning: Cruise remained on when commanded off.
- PM_a024 — Brake Irrational PM_a024_brakeIrrational Pedal Monitor Warning: Brake Pedal Error.
- PM_a025 — Unintended Reset PM_a025_unintendedReset Pedal Monitor Warning: Reset for unintended reason.
- PM_a026 — Di Heart Beat MIA PM_a026_diHeartBeatMIA Pedal Monitor Warning: DI Heartbeat is missing.
- PM_a027 — Eggright3 MIA PM_a027_eggright3MIA The pedal monitor (PM) electronic control unit (ECU) detects that the Etherloop Generalized Gateway Right (EGGRIGHT3) controller area network (CAN) node is missing (MIA).
- PM_a028 — Torque Cmd Error PM_a028_torqueCmdError Pedal Monitor Warning: Torque Command does not match DI torque command.
- PM_a029 — Cruise Rollback PM_a029_cruiseRollback Pedal Monitor reports the Cruise rollback threshold has been reached.
- PM_a030 — Inconsistent Aeb State PM_a030_inconsistentAebState Pedal Monitor Warning: Inconsistent AEB state.
- PM_a031 — High Stack Usage PM_a031_highStackUsage Pedal Monitor Warning: High Stack Usage.
- PM_a032 — Register Config Error PM_a032_registerConfigError Pedal Monitor Warning: Peripheral Register Configuration Error.
- PM_a033 — App MIA PM_a033_appMIA Pedal Monitor Warning: APP CAN node is missing.
- PM_a034 — Trq Cross Check PM_a034_trqCrossCheck Pedal Monitor Warning: Cross Check Failed.
- PM_a035 — Uds Transaction Initiated PM_a035_udsTransactionInitiated Diagnostic alert for UDS transaction initiated
- PM_a036 — Pre Watchdog PM_a036_preWatchdog Pedal Monitor Warning: Pre-watchdog expired.
- PM_a038 — Inconsistent Torque Sign PM_a038_inconsistentTorqueSign Pedal Monitor Warning: Master/Slave Torque Sign is Inconsistent.
- PM_a041 — Das MIA PM_a041_dasMIA Pedal Monitor Warning: DAS CAN node is missing.
- PM_a042 — Gtw MIA PM_a042_gtwMIA Pedal Monitor Warning: GTW CAN node is missing.
- PM_a043 — Inconsistent Config PM_a043_inconsistentConfig Pedal Monitor Warning: PM and GTW config is Inconsistent.
- PM_a044 — Ebr Intervention PM_a044_ebrIntervention Pedal Monitor Warning: External Brake Torque Command is Invalid.
- PM_a045 — Regen Backfill Intervention PM_a045_regenBackfillIntervention The Pedal Monitor has requested the Drive Interface (DI) disable regen backfill torque due to a condition detected affecting regen backfill braking functionality.
- PM_a046 — Incons Vehicle Hold State PM_a046_inconsVehicleHoldState Pedal Monitor Warning: Inconsistent Vehicle Hold state.
- PM_a047 — Incons Autopark State PM_a047_inconsAutoparkState Pedal Monitor Warning: Inconsistent Autopark state.
- PM_a048 — Stability Control Inhibit PM_a048_stabilityControlInhibit Pedal Monitor Warning: Stability Control Inhibited.
- PM_a049 — Stb Ctrl In Wrong Dir PM_a049_stbCtrlInWrongDir Pedal Monitor Warning: Stability Control actuated in the wrong direction.
- PM_a050 — Excessive Stb Ctrl Trq PM_a050_excessiveStbCtrlTrq Pedal Monitor Warning: Excessive amount of stability control actuation.
- PM_a051 — Unint Decel Stb Ctrl PM_a051_unintDecelStbCtrl Pedal Monitor Warning: Stability Control causes unintended deceleration.
- PM_a052 — Stb Ctrl Drvr Decel Cflct PM_a052_stbCtrlDrvrDecelCflct Pedal Monitor Warning: Stability Control is interfering with driver's ability to decelerate.
- PM_a053 — Vcfront MIA PM_a053_vcfrontMIA Pedal Monitor Warning: VCFRONT CAN node is missing.
- PM_a054 — Ui MIA PM_a054_uiMIA Pedal Monitor Warning: UI CAN node is missing.