Pedal monitor alerts
Browse 98 PM alert codes and open an entry for its description and recorded conditions.
PM alert codes
Showing 51–98 of 98
- PM_a056 — Can Hardware Bus B PM_a056_canHardwareBusB Pedal Monitor Warning: CAN hardware error.
- PM_a057 — Can Data Bus B PM_a057_canDataBusB Pedal Monitor Warning: Secondary CAN Integrity Check Failed.
- PM_a058 — Cmp MIA PM_a058_cmpMIA Pedal Monitor Warning: CMP CAN node is missing.
- PM_a060 — One Pedal Driving Inhibit PM_a060_onePedalDrivingInhibit Pedal Monitor Warning: One Pedal Driving module inhibited.
- PM_a061 — DI PM Version Mismatch PM_a061_DIPMVersionMismatch Pedal Monitor Warning: DI and PM versions do not match.
- PM_a062 — Ecc Error PM_a062_eccError Pedal Monitor Warning: ECC Protection anamoly detected.
- PM_a063 — Torque Command Inhibit PM_a063_torqueCommandInhibit Pedal Monitor Fault: Torque Command Qualifier set to faulted
- PM_a064 — Torque Intervention PM_a064_torqueIntervention Pedal Monitor Warning: Torque Intervention.
- PM_a065 — Brk Tmp Based Cp Est Mismatch PM_a065_brkTmpBasedCpEstMismatch Pedal Monitor Warning: Brake temperatire based Cp estimate mismatch between monitor and control for carbon ceramic brake package
- PM_a066 — Pmf MIA PM_a066_pmfMIA Pedal Monitor Warning: PMF CAN node is missing.
- PM_a067 — Pmr MIA PM_a067_pmrMIA Pedal Monitor Warning: PMR CAN node is missing.
- PM_a068 — Pmrel MIA PM_a068_pmrelMIA Pedal Monitor Warning: PMREL CAN node is missing.
- PM_a069 — Pmrer MIA PM_a069_pmrerMIA Pedal Monitor Warning: PMRER CAN node is missing.
- PM_a070 — Inconsistent Intra Axle Torque PM_a070_inconsistentIntraAxleTorque Pedal Monitor Warning: Intra-axle torque commands are inconsistent.
- PM_a071 — Direl MIA PM_a071_direlMIA Pedal Monitor Warning: DIREL CAN node MIA
- PM_a072 — Direr MIA PM_a072_direrMIA Pedal Warning: DIRER CAN node MIA
- PM_a073 — Can Data Bus C PM_a073_canDataBusC Pedal Monitor Warning: Secondary CAN Integrity Check Failed.
- PM_a074 — Can Hardware Bus C PM_a074_canHardwareBusC Pedal Monitor Warning: CAN hardware error.
- PM_a075 — Can Data Bus D PM_a075_canDataBusD Pedal Monitor Warning: Secondary CAN Integrity Check Failed.
- PM_a076 — Can Hardware Bus D PM_a076_canHardwareBusD Pedal Monitor Warning: CAN hardware error.
- PM_a077 — Can Data Bus E PM_a077_canDataBusE Pedal Monitor Warning: Secondary CAN Integrity Check Failed.
- PM_a078 — Can Hardware Bus E PM_a078_canHardwareBusE Pedal Monitor Warning: CAN hardware error.
- PM_a080 — Exception Prefetch Abort PM_a080_exceptionPrefetchAbort The Pedal Monitor (PM) processor has detected an internal exception. This alert does not on its own indicate a symptom or root cause.
- PM_a081 — Exception Data Abort PM_a081_exceptionDataAbort The Pedal Monitor (PM) processor has detected an internal exception. This alert does not on its own indicate a symptom or root cause.
- PM_a082 — Exception Data Abort2 PM_a082_exceptionDataAbort2 The Pedal Monitor (PM) processor has detected an internal exception. This alert does not on its own indicate a symptom or root cause.
- PM_a083 — Ahb Write Error PM_a083_ahbWriteError The Pedal Monitor (PM) processor has detected an internal exception. This alert does not on its own indicate a symptom or root cause.
- PM_a084 — Exception Mpu Firewall PM_a084_exceptionMpuFirewall The Pedal Monitor (PM) processor has detected an internal exception. This alert does not on its own indicate a symptom or root cause.
- PM_a086 — Exception Undefined Instruction PM_a086_exceptionUndefinedInstruction The Drive Interface (DI) processor has detected an internal exception.
- PM_a087 — Can Hardware Bus LIPC PM_a087_canHardwareBusLIPC Pedal Monitor Warning: CAN hardware error.
- PM_a088 — Cccm MIA PM_a088_cccmMIA Pedal Monitor Warning: CCCM CAN node is missing.
- PM_a090 — Excessive Motor Mz PM_a090_excessiveMotorMz Pedal Monitor Warning: Intra-axle torque actuals are excessively large.
- PM_a092 — Xtal Oscillator PM_a092_xtalOscillator Pedal Monitor Warning: Crystal oscillator inactive.
- PM_a093 — Accel Pedal Supply PM_a093_accelPedalSupply Pedal Monitor Warning: Accel pedal Supply out of bounds
- PM_a095 — IT PMS Timeout GNSS Convergence PM_a095_ITPMSTimeoutGNSSConvergence For Development Purposes - Converged absolute tire radii from GNSS RLS estimate during drive cycle
- PM_a096 — IT PMS Converged GNSS Abs Radius Times PM_a096_ITPMSConvergedGNSSAbsRadiusTimes For Development Purposes - Convergence timing information from GNSS RLS estimate during drive cycle
- PM_a098 — IT PMS Trigger Debug PM_a098_ITPMSTriggerDebug For Development Purposes- Either measured or ITPMS estimate pressure loss has exceeded the allowed threshold
- PM_a099 — IT PMS Calibrated PM_a099_ITPMSCalibrated For Development Purposes - ITPMS feature has been calibrated and will begin estimating pressure loss
- PM_a100 — Di Trace Info1 PM_a100_diTraceInfo1 The Pedal Monitor (PM) processor has detected an internal exception. This alert does not on its own indicate a symptom or root cause.
- PM_a110 — Indirect T PMS Soft Warning Front Left PM_a110_indirectTPMSSoftWarningFrontLeft The Indirect Tire Pressure Monitoring System (ITPMS) estimated the front left tire pressure is 20% less than the recommended cold pressure
- PM_a111 — Indirect T PMS Soft Warning Front Right PM_a111_indirectTPMSSoftWarningFrontRight The Indirect Tire Pressure Monitoring System (ITPMS) estimated the front right tire pressure is 20% less than the recommended cold pressure
- PM_a112 — Indirect T PMS Soft Warning Rear Left PM_a112_indirectTPMSSoftWarningRearLeft The Indirect Tire Pressure Monitoring System (ITPMS) estimated the rear left tire pressure is 20% less than the recommended cold pressure
- PM_a113 — Indirect T PMS Soft Warning Rear Right PM_a113_indirectTPMSSoftWarningRearRight The Indirect Tire Pressure Monitoring System (ITPMS) estimated the rear right tire pressure is 20% less than the recommended cold pressure
- PM_a114 — Indirect T PMS Hard Warning Front Left PM_a114_indirectTPMSHardWarningFrontLeft The Indirect Tire Pressure Monitoring System (ITPMS) estimated the front left tire pressure is 50% less than the recommended cold pressure
- PM_a115 — Indirect T PMS Hard Warning Front Right PM_a115_indirectTPMSHardWarningFrontRight The Indirect Tire Pressure Monitoring System (ITPMS) estimates the front right tire pressure is 50% less than the recommended cold pressure
- PM_a116 — Indirect T PMS Hard Warning Rear Left PM_a116_indirectTPMSHardWarningRearLeft The Indirect Tire Pressure Monitoring System (ITPMS) estimates the rear left tire pressure is 50% less than the recommended cold pressure
- PM_a117 — Indirect T PMS Hard Warning Rear Right PM_a117_indirectTPMSHardWarningRearRight The Indirect Tire Pressure Monitoring System (ITPMS) estimates the rear right tire pressure is 50% less than the recommended cold pressure
- PM_a120 — Indirect T PMS Faulted PM_a120_indirectTPMSFaulted The Indirect Tire Pressure Monitoring System (ITPMS) is not operating as expected and cannot detect pressure losses
- PM_a121 — Unintended Reset2 PM_a121_unintendedReset2 The Pedal Monitor (PM) or Pedal Monitor (PMx) electronic control unit (ECU) resets for an unintended reason, such as a watchdog timeout.