PM_a044 — Ebr Intervention

Full alert identifier: PM_a044_ebrIntervention

Alert description

Pedal Monitor Warning: External Brake Torque Command is Invalid.

The safety monitor will disable external braking request (EBR) for the remainder of the drive cycle.

The safety monitor sets this condition when sensor or other ECU inputs into EBR functionality are deemed implausible.

This alert will clear on the next drive cycle.

These diagnostic fields are associated with PM_a044. Check the alert's Alert Log in Service Mode Plus for available values.

Signal	Unit
Di Aeb State `PM_a044_diAebState` 0 UNAVAILABLE 1 STANDBY 2 ENABLED 3 STANDSTILL 4 FAULT 5 UNAVAILABLE ALERT 7 SNA	—
Di Brake Torque Command `PM_a044_diBrakeTorqueCommand`	Nm
Di Cruise State `PM_a044_diCruiseState` 0 UNAVAILABLE 1 STANDBY 2 ENABLED 3 STANDSTILL 4 OVERRIDE 5 FAULT 6 PRE FAULT 7 PRE CANCEL	—
Di Vehicle Hold State `PM_a044_diVehicleHoldState` 0 UNAVAILABLE 1 STANDBY 2 BLEND IN 3 STANDSTILL 4 BLEND OUT 5 PARK 6 FAULT 7 INIT	—
Pm Aeb State `PM_a044_pmAebState` 0 UNAVAILABLE 1 STANDBY 2 ENABLED 3 STANDSTILL 4 FAULT 5 UNAVAILABLE ALERT 7 SNA	—
Pm Bfill Torque Allowed `PM_a044_pmBfillTorqueAllowed`	Nm
Pm Cruise State `PM_a044_pmCruiseState` 0 UNAVAILABLE 1 STANDBY 2 ENABLED 3 STANDSTILL 4 OVERRIDE 5 FAULT 6 PRE FAULT 7 PRE CANCEL	—
Pm Vehicle Hold State `PM_a044_pmVehicleHoldState` 0 UNAVAILABLE 1 STANDBY 2 BLEND IN 3 STANDSTILL 4 BLEND OUT 5 PARK 6 FAULT 7 INIT	—

Show 1 more field

Signal	Unit
Regen Backfill Pm State `PM_a044_regenBackfillPmState` 0 UNAVAILABLE 1 STANDBY 2 ACTIVE	—

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of PM_a044.