Pedal monitor (front drive unit) alerts
Browse 42 PMF alert codes and open an entry for its description and recorded conditions.
PMF alert codes
Showing 1–42 of 42
- PMF_a001 — Absolute Torque PMF_a001_absoluteTorque Pedal Monitor Warning: Absolute Torque.
- PMF_a002 — Excessive Accel Torque PMF_a002_excessiveAccelTorque Pedal Monitor Warning: Accumulated Torque.
- PMF_a003 — Excessive Reversal Torque PMF_a003_excessiveReversalTorque Pedal Monitor Warning: Torque Reversal.
- PMF_a004 — Excessive Decel Torque PMF_a004_excessiveDecelTorque Pedal Monitor Warning: Deceleration Torque.
- PMF_a005 — Torque In Neutral Or Park PMF_a005_torqueInNeutralOrPark Pedal Monitor Warning: Torque Detected in non-torque producing gear.
- PMF_a006 — Under Torque Check PMF_a006_underTorqueCheck Pedal Monitor Warning: DI torque actual does not match PM torque measured
- PMF_a008 — Memory Error PMF_a008_memoryError Pedal Monitor Warning: Memory corruption detected.
- PMF_a010 — Di MIA PMF_a010_diMIA Pedal Monitor Warning: DI CAN node is missing.
- PMF_a011 — Phase Current Irrational PMF_a011_phaseCurrentIrrational Pedal Monitor Warning: Phase Current Irrational.
- PMF_a012 — Can Data Bus A PMF_a012_canDataBusA Pedal Monitor Warning: Secondary CAN Integrity Check Failed.
- PMF_a013 — Can Hardware Bus A PMF_a013_canHardwareBusA Pedal Monitor Warning: CAN hardware error.
- PMF_a017 — Brake MIA PMF_a017_brakeMIA Pedal Monitor Warning: Parking Brake CAN node is missing.
- PMF_a018 — Encoder Irrational PMF_a018_encoderIrrational Pedal Monitor Warning: Motor Encoder error.
- PMF_a019 — Stator Temp Irrational PMF_a019_statorTempIrrational Pedal Monitor Warning: Stator Temperature Sensor Error.
- PMF_a025 — Unintended Reset PMF_a025_unintendedReset Pedal Monitor Warning: Reset for unintended reason.
- PMF_a026 — Di Heart Beat MIA PMF_a026_diHeartBeatMIA Pedal Monitor Warning: DI Heartbeat is missing.
- PMF_a027 — Torque Estimation Out Of Bounds PMF_a027_torqueEstimationOutOfBounds Pedal Monitor Warning: Torque is out of pre-defined torque map.
- PMF_a028 — Torque Cmd Error PMF_a028_torqueCmdError Pedal Monitor Warning: Torque Command does not match DI torque command.
- PMF_a031 — High Stack Usage PMF_a031_highStackUsage Pedal Monitor Warning: High Stack Usage.
- PMF_a032 — Register Config Error PMF_a032_registerConfigError Pedal Monitor Warning: Peripheral Register Configuration Error.
- PMF_a033 — Self Test PMF_a033_selfTest Pedal Monitor Warning: Switch-off Path Test Failed.
- PMF_a034 — Trq Cross Check PMF_a034_trqCrossCheck Pedal Monitor Warning: Cross Check Failed.
- PMF_a035 — Uds Transaction Initiated PMF_a035_udsTransactionInitiated Diagnostic alert for UDS transaction initiated
- PMF_a036 — Pre Watchdog PMF_a036_preWatchdog Pedal Monitor Warning: Pre-watchdog expired.
- PMF_a037 — Hvp MIA PMF_a037_hvpMIA Pedal Monitor Warning: HVP CAN node MIA
- PMF_a039 — Dis MIA PMF_a039_disMIA Pedal Monitor Warning: DIS CAN node is missing.
- PMF_a040 — Pm MIA PMF_a040_pmMIA Pedal Monitor Warning: PM CAN node is missing.
- PMF_a042 — Gtw MIA PMF_a042_gtwMIA Pedal Monitor Warning: GTW CAN node is missing.
- PMF_a045 — Motor Movement Detected PMF_a045_motorMovementDetected Pedal Monitor Warning: Motor movement detected during stationary excess heat
- PMF_a053 — Vcfront MIA PMF_a053_vcfrontMIA Pedal Monitor Warning: VCFRONT CAN node is missing.
- PMF_a054 — Ui MIA PMF_a054_uiMIA Pedal Monitor Warning: UI CAN node is missing.
- PMF_a055 — Resolver PMF_a055_resolver Pedal Monitor Warning: Resolver operation abnormal.
- PMF_a056 — Can Hardware Bus B PMF_a056_canHardwareBusB Pedal Monitor Warning: CAN hardware error.
- PMF_a057 — Can Data Bus B PMF_a057_canDataBusB Pedal Monitor Warning: Secondary CAN Integrity Check Failed.
- PMF_a061 — DI PM Version Mismatch PMF_a061_DIPMVersionMismatch Pedal Monitor Warning: DI and PM versions do not match.
- PMF_a062 — Ecc Error PMF_a062_eccError Pedal Monitor Warning: ECC Protection anamoly detected.
- PMF_a064 — Torque Intervention PMF_a064_torqueIntervention Pedal Monitor Warning: Torque Intervention.
- PMF_a092 — Xtal Oscillator PMF_a092_xtalOscillator Pedal Monitor Warning: Crystal oscillator inactive.
- PMF_a094 — Safety IC Warn PMF_a094_safetyICWarn Pedal Monitor Warning: Smart watchdog warning
- PMF_a095 — Safety IC Fault PMF_a095_safetyICFault Pedal Monitor Warning: Smart watchdog fault
- PMF_a096 — Safety IC Debug PMF_a096_safetyICDebug Pedal Monitor Warning: Smart watchdog debug info
- PMF_a097 — Low Flow Almost Tripped PMF_a097_lowFlowAlmostTripped Low flow almost tripped