Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
Model 3, Y, S & X
676 tasks Showing 409–432
Clear filtersOpens the camera preview app used for pitch verification.
PROC_ICE_X_OPEN-CAMERA-PREVIEW
Tests the communication of the Overhead Console (OHC) Electronic Control Unit (ECU) over the Local Interconnect Network (LIN) bus network.
TEST-SELF_VCLEFT_OHC
Resets the Parking Brake (PARK) Electronic Control Unit (ECU). Reset is executed via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
TEST-RESET_PARK
Tests the ultrasonic sensor of the passenger side Falcon door to ensure it is functioning correctly when no obstacle is present.
TEST-SELF_BCFALCP_PAS_USS-DOOR-WITHOUT-OBSTACLE
Tests the ultrasonic sensor of the passenger side Falcon roof to ensure it is functioning correctly when no obstacle is present.
TEST-SELF_BCFALCP_PAS_USS-ROOF-WITHOUT-OBSTACLE
Calibrates the right front door actuator brake by opening the door and slightly moving the door 5 times in both the open and close directions.
TEST-SELF_BCFPM_FRONT-PAS_PFD-ACTUATOR-CAL-V2
Increases the force required to close the passenger front door for the BCFPM ECU.
PROC_BCFPM_FRONT-PAS-PFD-SET-CLOSE-CALIBRATION-HEAVIER
Decreases the force required to close the passenger front door for the BCFPM ECU.
PROC_BCFPM_FRONT-PAS-PFD-SET-CLOSE-CALIBRATION-LIGHTER
Increases the force required to open the passenger front door for the BCFPM ECU.
PROC_BCFPM_FRONT-PAS-PFD-SET-OPEN-CALIBRATION-HEAVIER
Decreases the force required to open the passenger front door for the BCFPM ECU.
PROC_BCFPM_FRONT-PAS-PFD-SET-OPEN-CALIBRATION-LIGHTER
Executes a routine to fold the Passenger mirror
PROC_BCFPM_MIRROR-FOLD
Executes a routine to unfold the Passenger mirror
PROC_BCFPM_MIRROR-UNFOLD
Tests the connectivity of the passenger seat (LHD) track position sensor to the right vehicle controller (VCRIGHT) ECU.
TEST-SELF_VCRIGHT_R_SEAT-TRACK-SENSOR
Calibrates the front passenger seat.
PROC_VCSEATP_SEAT-CALIBRATE
Tests if the passenger seat Occupant Classification System (OCS) sensor is drawing sufficient current and is communicating with the Local Interconnect Network (LIN) bus.
TEST-SELF_VCRIGHT_FRONT_P2-OCS
Performs a self test for the passenger side Falcon controller BCFALCP ECU.
TEST-SELF_BCFALCP_PAS_FALCON-CONTROLLER
Tests communication with the Power Conversion System (PCS) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_PCS
The test reads and reports serial or part number of the Power Conversion System (PCS).
TEST-SN_PCS
Resets the Power Conversion System (PCS) Electronic Control Unit (ECU). Reset is executed via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
TEST-RESET_PCS
Resets Pedal Monitor master (PM) Electronic Control Unit (ECU). Reset is executed via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
TEST-RESET_PM
Actuates the Plaid drive unit oil pumps for draining the gearbox fluid.
PROC_DIREL_X_OIL-PUMP-DRAIN-CONTROL
Actuates the Plaid drive unit oil pumps for filling the gearbox fluid.
PROC_DIREL_X_OIL-PUMP-FILL-CONTROL
Tests communication with the Pedal Monitor Front (PMF) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_PMF
Resets the Front Pedal Monitor (PMF) Electronic Control Unit (ECU). Reset is executed via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
TEST-RESET_PMF