Steering column control module alerts
Browse 29 SCCM alert codes and open an entry for its description and recorded conditions.
SCCM alert codes
Showing 1–29 of 29
- SCCM_a001 — CAN Bus Off SCCM_a001_CANBusOff Steering Column Control Module (SCCM) detected Controller Area Network (CAN) Bus Off.
- SCCM_a002 — CANT Out SCCM_a002_CANTOut Steering Column Control Module (SCCM) is not receiving a low voltage power state from the front vehicle controller (VCFRONT).
- SCCM_a003 — High Beam Open SCCM_a003_highBeamOpen Steering Column Control Module (SCCM) detected a high beam stalk open circuit. Analog-to-Digital Converter (ADC) reads 5V.
- SCCM_a004 — High Beam Short To GND SCCM_a004_highBeamShortToGND Steering Column Control Module (SCCM) detected a high beam stalk short to ground.
- SCCM_a005 — Tip Wipe Open SCCM_a005_tipWipeOpen Steering Column Control Module (SCCM) detected a Left Stalk Tip Wipe Open Circuit. Analog-to-Digital Converter (ADC) reads 5V.
- SCCM_a006 — Tip Wipe Short To GND SCCM_a006_tipWipeShortToGND Steering Column Control Module (SCCM) detected a left stalk tip wipe short to ground.
- SCCM_a007 — Turn Ind Com Info SCCM_a007_turnIndComInfo The turn signal lever is in an intermediate position. It is debounced for 1 second
- SCCM_a008 — Turn Ind Invalid Trans SCCM_a008_turnIndInvalidTrans Steering Column Control Module (SCCM) Analog-to-Digital Converter (ADC) channel signals change in an order not possible under normal operation.
- SCCM_a009 — Turn Ind Open SCCM_a009_turnIndOpen Steering Column Control Module (SCCM) detected a turn indicator stalk sensor is open circuit.
- SCCM_a010 — Turn Ind Short To Gnd SCCM_a010_turnIndShortToGnd Steering Column Control Module (SCCM) detected Turn indicator stalk sensor shorted to ground.
- SCCM_a011 — Turn Ind HW Err SCCM_a011_turnIndHWErr Steering Column Control Module (SCCM) detected turn indicator stalk sensor hardware error.
- SCCM_a012 — Turn Gen Err SCCM_a012_turnGenErr Steering Column Control Module (SCCM) detected a turn indicator sensor generic software error.
- SCCM_a013 — Voltage High SCCM_a013_voltageHigh Steering Column Control Module (SCCM) steering stalk module input power supply detected above 17.3V for 15 seconds.
- SCCM_a014 — Voltage Low SCCM_a014_voltageLow Steering Column Control Module (SCCM) steering stalk module input power supply detected below 7.1V for 15 seconds.
- SCCM_a015 — Software Error SCCM_a015_softwareError Steering Column Control Module (SCCM) detected a Turn indicator sensor generic software error.
- SCCM_a016 — Hardware Error SCCM_a016_hardwareError Steering Column Control Module (SCCM) steering stalk module hardware error detected.
- SCCM_a017 — Memory Error SCCM_a017_memoryError Steering Column Control Module (SCCM) detected a steering stalk module memory error.
- SCCM_a018 — Angle Speed Out Of Range SCCM_a018_angleSpeedOutOfRange Steering Column Control Module (SCCM) detected the steering angle sensor speed exceeded the threshold.
- SCCM_a019 — Angle Out Of Range SCCM_a019_angleOutOfRange Steering Column Control Module (SCCM) detected steering angle greater than 720deg detected, vehicle lock-to-lock is 375deg.
- SCCM_a020 — Angle Internal Error SCCM_a020_angleInternalError Steering Column Control Module (SCCM) steering angle sensor internal error detected.
- SCCM_a021 — Gear Stalk Signal Invalid SCCM_a021_gearStalkSignalInvalid Steering Column Control Module (SCCM) detected an invalid gear stalk signal.
- SCCM_a022 — Gear Stalk Open Circuit SCCM_a022_gearStalkOpenCircuit Steering Column Control Module (SCCM) detected a gear stalk open circuit.
- SCCM_a023 — Gear Stalk Short Circuit SCCM_a023_gearStalkShortCircuit Steering Column Control Module (SCCM) detected a gear stalk short circuit.
- SCCM_a024 — Gear Stalk Gen Err SCCM_a024_gearStalkGenErr Steering Column Control Module (SCCM) detected a gear stalk generic error.
- SCCM_a025 — Run Time Error SCCM_a025_runTimeError Steering Column Control Module (SCCM) detected a steering stalk module run time error.
- SCCM_a026 — Park Button Invalid Signal SCCM_a026_parkButtonInvalidSignal Steering Column Control Module (SCCM) detected a park button invalid signal.
- SCCM_a027 — Park Button Open Circuit SCCM_a027_parkButtonOpenCircuit Steering Column Control Module (SCCM) detected a park button open circuit.
- SCCM_a028 — Park Button Short To Ground SCCM_a028_parkButtonShortToGround Steering Column Control Module (SCCM) detected a park button short to ground.
- SCCM_a029 — Park Button Malfunction SCCM_a029_parkButtonMalfunction Steering Column Control Module (SCCM) detected a park button error.