SCCM_a006 — Tip Wipe Short To GND
Full alert identifier: SCCM_a006_tipWipeShortToGND
Message shown in the car
Wiper button malfunction
Alert description
Steering Column Control Module (SCCM) detected a left stalk tip wipe short to ground.
Potential impact
Wiper blade operation from gear stalk control may not operate as expected.
Set condition
SCCM detected a left stalk tip wipe short to ground.
Clear condition
Inspect wiring to SCCM and/or re-flash. If error persists after several power cycles, replace SCCM.
Signals to check
Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.
| Signal | Unit |
|---|---|
Adc Value
SCCM_
|
— |
Debounce Position
SCCM_
|
— |
Error Position
SCCM_
|
— |
Raw Position
SCCM_
|
— |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of SCCM_a006.