Vehicle gateway alerts
Browse 237 GTW alert codes and open an entry for its description and recorded conditions.
GTW alert codes
Showing 151–200 of 237
- GTW_w178 — BCFALCP version Mismatch GTW_w178_BCFALCPversionMismatch The vehicle gateway (GTW) detects the passenger-side Falcon door electromechanical controller (BCFALCP) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the v…
- GTW_w179 — BCFDM version Mismatch GTW_w179_BCFDMversionMismatch The vehicle gateway (GTW) detects the driver door control module (BCFDM) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w180 — BCFPM version Mismatch GTW_w180_BCFPMversionMismatch The vehicle gateway (GTW) detects the front passenger door control module (BCFPM) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w181 — BCRDM version Mismatch GTW_w181_BCRDMversionMismatch The vehicle gateway (GTW) detects the rear driver-side door control module (BCRDM) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w182 — BCRPM version Mismatch GTW_w182_BCRPMversionMismatch The vehicle gateway (GTW) detects the rear passenger-side door control module (BCRPM) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w183 — BCS2L version Mismatch GTW_w183_BCS2LversionMismatch The vehicle gateway (GTW) detects the 2nd row left seat controller (BCS2L) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w184 — BCS2R version Mismatch GTW_w184_BCS2RversionMismatch The vehicle gateway (GTW) detects the 2nd row right seat controller (BCS2R) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w185 — SNSUS version Mismatch GTW_w185_SNSUSversionMismatch The vehicle gateway (GTW) detects the Ultrasonic Sensor (SNSUS) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w186 — Swr Precaution GTW_w186_swrPrecaution Steering wheel reset precaution
- GTW_w218 — Switch OTP Incorrect GTW_w218_switchOTPIncorrect switch OTP incorrect
- GTW_w220 — I2C Slave Reset GTW_w220_i2cSlaveReset i2cSlave was reset because it was hung
- GTW_w221 — I2C Slave Quiet GTW_w221_i2cSlaveQuiet i2cSlave was quiet. Might not be an problematic
- GTW_w222 — OCS version Mismatch GTW_w222_OCSversionMismatch The vehicle gateway (GTW) detects the Occupancy Classification System (OCS) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w223 — LVBMS version Mismatch GTW_w223_LVBMSversionMismatch The vehicle gateway (GTW) detects the Low Voltage Battery Management System (LVBMS) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w224 — Sd Card Upgrade Needed GTW_w224_sdCardUpgradeNeeded The vehicle gateway (GTW) detects that its installed microSD card does not meet current specifications and needs to be replaced. May indicate the microSD card storage limit does not meet requirements (for example, 8GB instead of 16GB).
- GTW_w225 — Reset On Sleep Wake GTW_w225_resetOnSleepWake Indicates GTW reset on an attempt to sleep or wake before waking the MCU
- GTW_w226 — DISP version Mismatch GTW_w226_DISPversionMismatch The vehicle gateway (GTW) detects the touchscreen center display panel (DISP) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w227 — DISPTOUCH version Mismatch GTW_w227_DISPTOUCHversionMismatch The vehicle gateway (GTW) detects the touchscreen center display touch module (DISPTOUCH) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w228 — DISPOSD version Mismatch GTW_w228_DISPOSDversionMismatch The vehicle gateway (GTW) detects the touchscreen center display On-Screen-Display (DISPOSD) package electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehi…
- GTW_w229 — Display Softset Connection GTW_w229_displaySoftsetConnection Indicates center display connector is not connected or is soft-set
- GTW_w230 — Touch Interrupt Storm GTW_w230_touchInterruptStorm The vehicle Gateway (GTW) detects an interrupt storm on the Center Information Display (CID) touch interrupt line, which may cause the touchscreen to be slow to respond or unresponsive to touch inputs.
- GTW_w244 — SDCR version Mismatch GTW_w244_SDCRversionMismatch The vehicle gateway (GTW) detects the Secondary Disconnect Controller (SDCR) electronic control unit (ECU) is running a firmware version that may not be compatible with the firmware installed on the rest of the vehicle.
- GTW_w245 — Aps Not Disabled GTW_w245_apsNotDisabled SVI2 power management controller is not correctly initialized to disable auto phase shedding - might cause failure to boot Info-Ryzen (AMD) Media-Control Unit (MCU)
- GTW_w246 — Touchcore Heartbeat GTW_w246_touchcoreHeartbeat Gateway (GTW) reports no heartbeat from the core responsible for touch (touchcore) for five seconds.
- GTW_w255 — Rtc32 K Hz Watchdog GTW_w255_rtc32KHzWatchdog RTC 32KHz clock was disabled
- GTW_w260 — Unknown PN GTW_w260_unknownPN GTW has an unknwon part number
- GTW_w261 — Adsp Watchdog GTW_w261_adspWatchdog The Audio Digital Signal Processor (ADSP) is being rebooted by the vehicle gateway (GTW) after not responding to pings (communication requests) from the GTW.
- GTW_w262 — Can Log Block Dropped GTW_w262_canLogBlockDropped Unable to write log block to disk
- GTW_w263 — Hrl Udp File Avail GTW_w263_hrlUdpFileAvail UDP-triggered HRL File available
- GTW_w264 — Hrl Pseudo File Avail GTW_w264_hrlPseudoFileAvail Pseudonymous HRL File available
- GTW_w265 — Option Flags Error GTW_w265_optionFlagsError GTW reports a mismach between board_rev v/s PN based option flags
- GTW_w266 — Dpp1 MIA GTW_w266_dpp1MIA The vehicle gateway (GTW) has not received an expected state message from the Dual Power Pump 1 (DPP1) electronic control unit (ECU) via the controller area network (CAN) within the required time period, indicating the DPP1 ECU may be unav…
- GTW_w267 — Dpp2 MIA GTW_w267_dpp2MIA The vehicle gateway (GTW) has not received an expected state message from the Dual Power Pump 2 (DPP2) electronic control unit (ECU) via the controller area network (CAN) within the required time period, indicating the DPP2 ECU may be unav…
- GTW_w268 — Sto MIA GTW_w268_stoMIA The vehicle gateway (GTW) has not received an expected control information from the Steering Torque Overlay (STO) electronic control unit (ECU) via the controller area network (CAN) within the required time period, indicating the STO ECU m…
- GTW_w275 — VDDCORE DrMOS Fault GTW_w275_VDDCORE_DrMOS_Fault The alert is set when the DRMOS component detects either an over current condition or an over temperature condition on VDDCORE. The infotainment computer is shut down to protect it from damage.
- GTW_w276 — VDDSOC DrMOS Fault GTW_w276_VDDSOC_DrMOS_Fault The alert is set when the DRMOS component detects either an over current condition or an over temperature condition on VDDSOC. The infotainment computer is shut down to protect it from damage.
- GTW_w277 — Non Rev C DrMOS Mitigation Failed GTW_w277_NonRevCDrMOSMitigationFailed The Gateway (GTW) attempted to apply a mitigation for non Rev-C Driver and MOSFET (DrMOS) component by programming the power management controller, but the mitigation attempt was unsuccessful. If the mitigation is unsuccessful, the media c…
- GTW_w278 — Eth Switch Congested GTW_w278_ethSwitchCongested The gateway detects that the network ethernet switch has started to become congested
- GTW_w279 — Adsp Repeated Watchdog GTW_w279_adspRepeatedWatchdog The Audio Digital Signal Processor (ADSP) is being rebooted by the vehicle gateway (GTW) after not responding to pings (communication requests) from the GTW.
- GTW_w280 — Hrl Frame Dropped GTW_w280_hrlFrameDropped Gateway was unable to queue an HRL message
- GTW_w311 — Can Log Queue Full Before Fs Init GTW_w311_canLogQueueFullBeforeFsInit Could not log CAN message (filesystem not initialized). Queue full.
- GTW_w312 — Hrl File Incomplete GTW_w312_hrlFileIncomplete HRL File was unable to be finished and is not available
- GTW_w313 — OSD Active GTW_w313_OSDActive Indicates unavailability of the UI to the driver and that the OSD Gear Strip has been presented to the user.
- GTW_w314 — Can Log Block Write Err GTW_w314_canLogBlockWriteErr Failure to write a CAN log block object to disk; data will be dropped.
- GTW_w316 — Sd Card Chkdsk Repair GTW_w316_sdCardChkdskRepair The vehicle Gateway (GTW) checked the SD card for file system errors.
- GTW_w317 — Sd Card Chkdsk Repair Failed GTW_w317_sdCardChkdskRepairFailed The vehicle Gateway (GTW) detected file system errors on the SD card but was unable to repair them. The SD Card needs to be reformatted.
- GTW_w322 — Gesture Unrecognized From Moving GTW_w322_gestureUnrecognizedFromMoving Indicates the state of gesture state machine can not recognize the gesture in MOVING_UP/DOWN state.
- GTW_w323 — Gesture Start Out Of Strip GTW_w323_gestureStartOutOfStrip Gesture starts out of strip in 3x width area and arrives in strip.
- GTW_w328 — Smart Shift Disabled GTW_w328_smartShiftDisabled Smart shift is disabled because of unhealthy checking or user settings.
- GTW_w332 — Unknown Display PN GTW_w332_unknownDisplayPN Find a Unknown DisplayPN or failed to read DisplayPN when read DisplayPN