Skip to content

Tesla service tasks.

Find the procedure. Understand what it does. Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.

1,357

service tasks

Model 3, Y, S & X

Find a service task

665 tasks Showing 169–192

Clear filters
Service procedures

Disable 2Row Right Pitch

Disable 2Row Right Pitch

PROC_VCRIGHT_R_EASY-ENTRY-PITCH-DISABLE

Model 3 / Y
Service procedures

Disable Card-based SIM

Disable Card-based SIM

PROC_ICE_X_DISABLE-SIM-CARD

Model S / X (legacy)
Service procedures

Disable Front Passenger Seat Hard Stop

Disables the hard stop feature on the front passenger seat. This allows the seat to travel beyond its set physical travel limits. The hard stop feature must be re- enabled after running this routine.

PROC_VCSEATP_FRONT-SEAT-DISABLE-HARD-STOP

Model S / X (2021+)
Service procedures

Disarm RCM

Disarms the Restraints Control Module (RCM)

PROC_RCM_DISARM

Model 3 / Y Model S / X (2021+)
Service procedures

Display Tilt Mechanism Calibration

Calibrates the center display tilt mechanism actuators. Display will tilt during the calibration.

PROC_VCLEFT_DISPLAY-MECH-CALIBRATE

Model S / X (2021+)
Service procedures

Drive Front Door - Write Actuator Brake Calibration

Write the calibration values of the front door actuator brake. If no values are specified, then default calibration values will be written. Check Toolbox article #23251 for more details. Note: CW = Clock Wise, used by RIGHT side door; CCW = Counter Clock Wise, used by LEFT side door.

PROC_BCFDM_FRONT-DRV_WRITE-PFD-ACTUATOR-CAL

Model S / X (legacy)
Service procedures

Drive Inverter Front (DIF) - Restore Application Data After Replacement

Restores the Drive Inverter Front (DIF) application data from the most recent backup on the car computer and configures the Usage ID after a DIF replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.

PROC_DIF_X_LEGACY-RESTORE-ENTRYPOINT

Model 3 / Y Model S / X (2021+)
Service procedures

Drive Inverter Front (DIF) - Restore Bootloader Data After Replacement

Restores the Drive Inverter Front (DIF) bootloader data from the most recent backup on the car computer and configures the Usage ID after a DIF replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.

PROC_PMF_X_LEGACY-RESTORE-ENTRYPOINT

Model 3 / Y Model S / X (2021+)
Service procedures

Drive Inverter Rear (DIR) - Restore Application Data After Replacement

Restores the Drive Inverter Rear (DIR) application data from the most recent backup on the car computer and configures the Usage ID after a DIR replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.

PROC_DIR_X_LEGACY-RESTORE-ENTRYPOINT

Model 3 / Y Model S / X (2021+)
Service procedures

Drive Inverter Rear (DIR) - Restore Bootloader Data After Replacement

Restores the Drive Inverter Rear (DIR) bootloader data from the most recent backup on the car computer and configures the Usage ID after a DIR replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.

PROC_PMR_X_LEGACY-RESTORE-ENTRYPOINT

Model 3 / Y Model S / X (2021+)
Service procedures

Drive Inverter Rear Left (DIREL) - Restore Application Data After Replacement

Restores the Drive Inverter Rear Left (DIREL) application data from the most recent backup on the car computer and configures the Usage ID after a DIREL replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.

PROC_DIREL_X_LEGACY-RESTORE-ENTRYPOINT

Model S / X (2021+)
Service procedures

Drive Inverter Rear Left (DIREL) - Restore Bootloader Data After Replacement

Restores the Drive Inverter Rear Left (DIREL) bootloader data from the most recent backup on the car computer and configures the Usage ID after a DIREL replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.

PROC_PMREL_X_LEGACY-RESTORE-ENTRYPOINT

Model S / X (2021+)
Service procedures

Drive Inverter Rear Right (DIRER) - Restore Application Data After Replacement

Restores the Drive Inverter Rear Right (DIRER) application data from the most recent backup on the car computer and configures the Usage ID after a DIRER replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.

PROC_DIRER_X_LEGACY-RESTORE-ENTRYPOINT

Model S / X (2021+)
Service procedures

Drive Inverter Rear Right (DIRER) - Restore Bootloader Data After Replacement

Restores the Drive Inverter Rear Right (DIRER) bootloader data from the most recent backup on the car computer and configures the Usage ID after a DIRER replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.

PROC_PMRER_X_LEGACY-RESTORE-ENTRYPOINT

Model S / X (2021+)
Service procedures

Driver Falcon Door Side Pinch Strip Test

Tests the driver side pinch strip on Falcon doors by monitoring the BCFALCD_pinchStripStatus CAN signal.

PROC_BCFALCD_FALCON-DRV_PINCH-STRIP-NEW

Model S / X (legacy)
Service procedures

Driver Front Door Set Close Force Heavier

Increases the force required to close the driver front door for the BCFDM ECU.

PROC_BCFDM_FRONT-DRV-PFD-SET-CLOSE-CALIBRATION-HEAVIER

Model S / X (2021+)