ModelX/tasks/PROC_BCFDM_FRONT-DRV_WRITE-PFD-ACTUATOR-CAL
Write the calibration values of the front door actuator brake. If no values are specified, then default calibration values will be written. Check Toolbox article #23251 for more details. Note: CW = Clock Wise, used by RIGHT side door; CCW = Counter Clock Wise, used by LEFT side door.
Open a version to see its description, requirements, and input definitions. Hardware configuration and live vehicle checks also determine availability.
Changing brake calibration settings will impact the holding force of the door actuator.
0cw_gain · Float
Firmware default: -7.45
1cw_offset · Float
Firmware default: 48.4
2ccw_gain · Float
Firmware default: -7.9
3ccw_offset · Float
Firmware default: 50.4
User initiated check for the interior mechanical door release. The mechanical release on the front door is a cable that is actuated when the interior door handle is pulled back fully. This test only applies to Model X vehicles equipped with LIN controlled cinching latches.
TEST_BCFDM_FRONT-DRV_DOOR-RELEASED
Read the calibration values of the front door actuator brake. Check Toolbox article #23251 for more details.
PROC_BCFDM_FRONT-DRV_READ-PFD-ACTUATOR-CAL
This test checks for the presence of the driver door module at station FL-210 to ensure the connection to the door module is made correctly.
TEST_BCFDM_FRONT-DRV_PRESENCE
The automated mirror folding routine actuates the mirror through its full range of motion while folding.
PROC_BCFDM_DRV_MIRROR-FOLDING-DR