Right Rear Door Speaker (Premium) Test
This tests the functionality of the Right Rear Door Speaker (Premium).
TEST-BASH_CID_REAR-R_SPEAKER-RRDO
The service task reference · 2026
Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
2026 firmware
Model 3, Y, S & X
1,357 tasks Showing 1033–1056
Browse by name, A–Z
This tests the functionality of the Right Rear Door Speaker (Premium).
TEST-BASH_CID_REAR-R_SPEAKER-RRDO
This tests the functionality of the Right Rear Lift Gate Speaker (Premium).
TEST-BASH_CID_REAR-R_SPEAKER-RRLG
Tests auto-addressing and communication of RGB lights controlled by the Right Vehicle Controller (VCRIGHT) Electronic Control Unit (ECU). Communication is established via the Local Interconnect Network (LIN) bus.
TEST-SELF_VCRIGHT_X_RGB-LIGHTS
Calibrates the front right seat track & motor.
PROC_VCRIGHT_SEAT-CALIBRATE
A consolidation of all the ODIN routines required to be run post replacing a right seat controller. The routine will wait for up to 30s for the second row right seat to be unoccupied.
PROC_VCSEAT2R_2R_POST-REPLACEMENT-PROCEDURE
Tests the right second row HVAC airwave vertical and lateral vent actuators. This routine detects whether each actuator is connected and calibrated. Each actuator's end- stop and zero-stop voltage and forward and reverse encoder values will be output.
TEST-SELF_VCLEFT_X_AIRWAVE-SECOND-ROW-RIGHT
Moves the right second row seat armrest to the downward endstop then a full range move to test the seat armrest, finally store the seat armrest as its nominal use position.
PROC_VCSEAT2R_X_2R-SEAT-ARMREST-FUNCTIONAL-TEST
Moves the right second row seat to the nominal use position, to the rearward endstop, and repeats another time to record speed history.
PROC_VCSEAT2R_R2-SEAT-ARMREST-HISTORY-GENERATION
Moves the right second row seat to the rearward endstop to perform position calibration, then move seat to the nominal use position.
PROC_VCSEAT2R_2R-SEAT-RECLINE-CALIBRATION
Moves the right second row seat to the rearward endstop to perform position calibration, then move seat to the nominal use position.
PROC_VCSEAT2R_R2-SEAT-CALIBRATION
Tests electrical connection of the right second row seat switchpack, buckle, occupancy, heatpad, fan, absolute position sensor, motor, and encoder.
TEST-SELF_VCSEAT2R_R2-SEAT
Moves the second row seat recliner/backrest to the rearward endstop to perform position calibration, then moves the backrest to the nominal use position.
PROC_VCRIGHT_X_2R-SEAT-RECLINE-CALIBRATION
Tests electrical connection of the second row seat adjustable recline sswitchpack, position sensor, motor, and encoder.
TEST-SELF_VCRIGHT_X_2R-SEAT-RECLINE-CONTROLS
Attempts to moves the second row seat recliner/backrest rearward, fold the seat, then unfold the seat to the nominal position.
PROC_VCRIGHT_X_2R-SEAT-RECLINE-FUNCTIONAL-TEST
Attempts to moves the second row seat recliner/backrest rearward, fold the seat, then unfold the seat to the nominal position.
PROC_VCSEAT2R_X_2R-SEAT-RECLINE-FUNCTIONAL-TEST
Moves the right second row seat track to the rearward endstop then a full range move to test the seat track, then move seat track to the nominal use position.
PROC_VCSEAT2R_X_2R-SEAT-TRACK-FUNCTIONAL-TEST
Executes a test to briefly turn on the right side and rear view mirror dimming (rear view only on Model X and Model Y Standard) and verify the voltage rail drops the minimum amount to confirm connectivity. Note this test only distinguishes between no mirrors connected and at least one connected.
TEST-SELF_VCRIGHT_X_MIRROR-DIM
Tests the connection to the right side repeater camera, and performs a camera firmware update.
PING-HTTP_DAS_R_REPEATER-CAMERA-SCRIPT
Tests the right side repeater off VCBATT2 on split front controller
TEST-SELF_VCBATT2_R_SIDE-REPEATER
Tests the connectivity of the right side repeater.
TEST-SELF_VCFRONT_R_SIDE-REPEATER
Check that the right signal light is working correctly.
TEST_VCFRONT_R_SIGNAL-LIGHT
Tests electrical connection of the third row seat adjustable recline switchpack, position sensor, motor, encoder, buckle, occupancy and heatpad.
TEST-SELF_VCRIGHT_X_3R-SEAT-6-SEATER
Moves the third row seat recliner/backrest to the rearward endstop to perform position calibration, then moves the backrest to the nominal use position.
PROC_VCRIGHT_X_3R-SEAT-RECLINE-CALIBRATION
Attempts to moves the second row seat recliner/backrest rearward, fold the seat, then unfold the seat to the nominal position.
PROC_VCRIGHT_X_3R-SEAT-RECLINE-FUNCTIONAL-TEST
Descriptions and input definitions come from Tesla’s 2026 vehicle firmware. This catalog includes tasks covered by Tesware’s current service access. Each task page lists the vehicle and firmware versions in which it was found. The connected vehicle confirms whether a task can run.
Cybertruck is not included in this 2026 reference.