This routine resets the High Voltage Controller (HVC) life model algorithm to enhance range estimations when an untrustworthy condition is detected.
In cases where significant accumulated errors occur, this routine can reset the calculated amp-hour capacity (CAC) and/or life model histogram records, ensuring more accurate range predictions.
PROC_HVC_X_RESET-LIFE-MODEL
Model 3 / Y
Model S / X (2021+)
The procedure resets ride height calibration values to default.
PROC_TAS_X_RESET-RIDE-HEIGHT-CALIBRATION
Model S / X (legacy)
Model S / X (2021+)
The procedure resets the PIN for Speed Limit Mode to '0000'.
PROC_ICE_X_RESET-SPEEDLIMIT-PIN
Model 3 / Y
Model S / X (legacy)
Model S / X (2021+)
Reset learned tire radius and pressure estimates, which are important to maintain optimal regenerative braking performance. This task also clears the tire rotation alert after tire service. Optionally specify Winter (1) or Summer/All-Season (0) tires to improve tire offset learning.
PROC_DI_CLEAR-LEARNT-TIRE-OFFSET
Model S / X (2021+)
Restores the Front Drive Inverter (DIF) application data and configures the Usage ID after a DIF replacement.
PROC_DIF_X_RESTORE-DATA-APP
Model 3 / Y
Model S / X (2021+)
Restores the Front Drive Inverter (DIF) bootloader data and configures Usage ID after a DIF replacement.
Press the brake pedal to turn on drive rail before starting the routine.
PROC_PMF_X_RESTORE-DATA-BOOT-AND-WRITE-DRIVE-TYPE
Model S / X (2021+)
Restores the Rear Drive Inverter (DIR) bootloader data and configures Usage ID after a DIR replacement.
Press the brake pedal to turn on drive rail before starting the routine.
PROC_PMR_X_RESTORE-DATA-BOOT-AND-WRITE-DRIVE-TYPE
Model S / X (2021+)
Restores the Rear Left Drive Inverter (DIREL) application data after a DIREL replacement.
Press the brake pedal to turn on drive rail before starting the routine.
PROC_DIREL_X_RESTORE-DATA-APP
Model S / X (2021+)
Restores the Rear Left Drive Inverter (PMREL) bootloader data and configures Usage ID after a DIR Left replacement.
Press the brake pedal to turn on drive rail before starting the routine.
PROC_PMREL_X_RESTORE-DATA-BOOT-AND-WRITE-DRIVE-TYPE
Model S / X (2021+)
This routine restores the Rear Right Drive Inverter Application Data after replacement.
Press the brake pedal to turn on drive rail before starting the routine.
PROC_DIRER_X_RESTORE-DATA-APP
Model S / X (2021+)
This routine restores the Rear Right Drive Inverter Bootloader Data after Replacement and Usage ID Configuration.
Press the brake pedal to turn on drive rail before starting the routine.
PROC_PMRER_X_RESTORE-DATA-BOOT-AND-WRITE-DRIVE-TYPE
Model S / X (2021+)
Restores Rear Left Drive Inverter (DIREL) bootloader data after DIREL replacement
PROC_PMREL_X_RESTORE-DATA-BOOT
Model S / X (2021+)
The procedure restores user profile data from an encrypted backup on mothership.
PROC_ICE_X_PROFILE-RESTORE
Model 3 / Y
Model S / X (legacy)
Model S / X (2021+)
Vehicle Type Approval String
PROC_RCM_X_LEARN-WVTA
Model 3 / Y
Model S / X (2021+)
Calibrates the Right Front (RF) door handle by actuating the fork to its maximum and minimum positions.
When necessary, this routine also configures the door handle controller to learn its location.
PROC_VCRIGHT_FRONT-R_CALIBRATE-DOOR-HANDLE
Model S / X (2021+)
Runs the self tests for the right front door
TEST-SELF_VCRIGHT_FRONT-R_DOOR
Model 3 / Y
Model S / X (2021+)
Runs all the routines for RGB lights addressing.
PROC_VC_X_RGB-LIGHTS-ADDRESSING
Model 3 / Y
Model S / X (2021+)
Tests connection to right b-pillar camera and performs camera firmware update.
PING-HTTP_DAS_R_B-PILLAR-CAMERA-SCRIPT
Model 3 / Y
Model S / X (2021+)
Tests connection and harness of the right blind spot indicator light controlled by the Right Vehicle Controller (VCRIGHT) Electronic Control Unit (ECU).
TEST-SELF_VCRIGHT_X_BLIND-SPOT-LED
Model S / X (2021+)
A consolidation of all the ODIN routines required to be run post replacing a Right controller.
The routine will wait for up to 30s for the right seat to be unoccupied and all right hand doors to be closed.
PROC_CONTROLLER_RIGHT_POST-REPLACEMENT-PROCEDURE
Model 3 / Y
Model S / X (2021+)
Tests the power, connection, and communication of the right footwell light controlled by the Right Vehicle Controller (VCRIGHT).
TEST-SELF_VCRIGHT_X_FOOTWELL-LIGHT
Model 3 / Y
Model S / X (2021+)
Runs the self tests for the right front seat without lumbar support
TEST-SELF_VCRIGHT_FRONT_SEAT-NO-LUMBAR
Model 3 / Y
Model S / X (2021+)
Tests for power, connection, and communication of the right headlamp controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_R_HCM
Model 3 / Y
Model S / X (2021+)
Executes a routine to fold the right mirror
PROC_VCRIGHT_MIRROR-FOLD
Model 3 / Y
Model S / X (2021+)