Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
Model 3, Y, S & X
676 tasks Showing 337–360
Clear filtersRequests infotainment system reboot. Gateway (GTW) does not reboot.
PROC_ICE_X_REBOOT
The procedure runs a staged firmware update after 120 seconds.
PROC_ICE_X_INSTALL-UPDATE
Tests instrument cluster unit (ICU) display for power and connection
PING-BASH_DISPLAY_ICU
Verifies selfie cam current draw when IR LED is on
TEST-SELF_VCRIGHT_DAS_INTERIOR-CAMERA-LED
Tests interior camera connection and performs camera firmware update.
PING-HTTP_DAS_X_INTERIOR-CAMERA-SCRIPT
Run interior camera fan to detect noise
PROC_VCRIGHT_DAS_RUN-INTERIOR-CAMERA-FAN
Run interior camera fan and check its RPM
TEST-SELF_VCRIGHT_DAS_INTERIOR-CAMERA-FAN
Run this routine after replacing the Li-Ion Low Voltage (LV) battery. Checks the fitted battery variant, adjusts vehicle configurations to the fitted variant type, and resets the required controllers and battery data.
PROC_VC_X_POST-LI-ION-LV-BATTERY-REPLACEMENT
This routine wil learn vehicle parameters to the radar.
PROC_RADC_X_PLANT-MODE
Tests connection to right b-pillar camera and performs camera firmware update.
PING-HTTP_DAS_L_B-PILLAR-CAMERA-SCRIPT
Tests connection and harness of the left blind spot indicator light controlled by the Left Vehicle Controller (VCLEFT) Electronic Control Unit (ECU).
TEST-SELF_VCLEFT_X_BLIND-SPOT-LED
A consolidation of all the ODIN routines required to be run post replacing a Left controller. The routine will wait for up to 30s for the left seat to be unoccupied and all left hand doors to be closed.
PROC_CONTROLLER_LEFT_POST-REPLACEMENT-PROCEDURE
Tests the power, connection, and communication of the left footwell light controlled by the Left Vehicle Controller (VCLEFT).
TEST-SELF_VCLEFT_X_FOOTWELL-LIGHT
Tests for power, connection, and communication of the front left seat controlled by the Left Vehicle Controller (VCLEFT).
TEST-SELF_VCLEFT_FRONT_SEAT-NO-LUMBAR
Tests for power, connection, and communication of the left headlamp controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_L_HCM
Tests the communication of the left headlamp module with the VCBATT ECU.
TEST-SELF_VCBATT_L_HCM
Executes a routine to fold the left mirror
PROC_VCLEFT_MIRROR-FOLD
Executes a routine to unfold the left mirror
PROC_VCLEFT_MIRROR-UNFOLD
Tests auto-addressing and communication of RGB lights controlled by the Left Vehicle Controller (VCLEFT) Electronic Control Unit (ECU). Communication is established via the Local Interconnect Network (LIN) bus.
TEST-SELF_VCLEFT_X_RGB-LIGHTS
Tests the left second row HVAC airwave vertical and lateral vent actuators. This routine detects whether each actuator is connected and calibrated. Each actuator's end- stop and zero-stop voltage and forward and reverse encoder values will be output.
TEST-SELF_VCLEFT_X_AIRWAVE-SECOND-ROW-LEFT
Executes a test to briefly turn on the left side mirror dimming and verify the voltage rail drops the minimum amount to confirm connectivity.
TEST-SELF_VCLEFT_X_MIRROR-DIM
Tests the connection to the left side repeater camera, and performs a camera firmware update.
PING-HTTP_DAS_L_REPEATER-CAMERA-SCRIPT
Tests communication with the left vehicle controller (VCLEFT) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_VCLEFT
Calibrates the Left Front (LF) door handle by actuating the fork to its maximum and minimum positions. When necessary, this routine also configures the door handle controller to learn its location.
PROC_VCLEFT_FRONT-L_CALIBRATE-DOOR-HANDLE