Front Passenger Seat Self-Test
Tests the front passenger seat functions and connectivity to the VCSEATP ECU.
TEST-SELF_VCSEATP_FRONT_P2-SEAT
Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
Model 3, Y, S & X
676 tasks Showing 265–288
Clear filtersTests the front passenger seat functions and connectivity to the VCSEATP ECU.
TEST-SELF_VCSEATP_FRONT_P2-SEAT
Tests for power, connection, and communication of the front right seat lumbar controlled by the Right Vehicle Controller (VCRIGHT).
TEST-SELF_VCRIGHT_FRONT-R_SEAT-LUMBAR
Calibrates front right window endstops for pinch detection. Ensure front right door is closed. Do not open the door or press the window switch button while the routine runs.
TEST-SELF_VCRIGHT_FRONT-R_CALIBRATE-WINDOW
Move window to a specified position.
PROC_VCRIGHT_FRONT-R_COMMAND-WINDOW-POSITION
Programs the address of the front Ultrasonic Sensors (USS).
PROC_USM_FRONT_PROGRAM-USS-ADDRESSES
Tests for power, connection, and communication of the lockout circuit controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_X_LOCKOUT-CIRCUIT
Checks the electrical connection of the LED light in front trunk emergency release switch controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_X_FRUNK-LED
The test releases the latch of the front trunk controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_X_FRUNK-LATCH
The procedure fuses only the modem board when the other components are already fused. This is useful for modem replacements that were not fused in the factory. Production components should always be fused.
PROC_SEC_X_FUSE-MODEM
Interface for the gw-display-control utility.
PROC_CID_X_GW-DISPLAY-CONTROL
Tests communication with an Electronic Control Unit (ECU) selected by the user. Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN) and confirming a response within 5 seconds.
PING-TP_ECU
Retrieves component information for the Front Drive Unit and Inverter (DIF) Including: - Drive Unit Part Number - Drive Unit Serial Number - Inverter Part Number - Inverter Serial Number - Two Phase Open Pyro - Motor Type
PROC_DIF_X_GET-PARTS-INFO
Retrieves component information for the Rear Drive Unit and Inverter (DIR) Including: - Drive Unit Part Number - Drive Unit Serial Number - Inverter Part Number - Inverter Serial Number - Two Phase Open Pyro - Motor Type
PROC_DIR_X_GET-PARTS-INFO
Retrieves component information for the Rear Left Drive Unit and Inverter (DIREL) Including: - Drive Unit Part Number - Drive Unit Serial Number - Inverter Part Number - Inverter Serial Number - Two Phase Open Pyro - Motor Type
PROC_DIREL_X_GET-PARTS-INFO
Retrieves component information for the Rear Right Drive Unit and Inverter (DIRER) Including: - Drive Unit Part Number - Drive Unit Serial Number - Inverter Part Number - Inverter Serial Number - Two Phase Open Pyro - Motor Type
PROC_DIRER_X_GET-PARTS-INFO
Get MCU Board Info Procedure
PROC-BASH_MCU_X_GET-BOARD-INFO
Opens the glovebox and bypasses glovebox pin.
PROC_ICE_X-OPEN-GLOVEBOX
This test is an end to end check for the glovebox USB device.
TEST-BASH_CID_X_USB3-GLOVEBOX-SERVICE
This test is an end to end check for the glovebox USB (with Bluetooth) device.
TEST-BASH_CID_X_USB3-GLOVEBOX-BT-SERVICE
GNSS USB Desense Test To Capture Constellation Values and Signal Strength Delta With USB On and then Off
TEST_DAS_X_GNSS-USB-DESENSE-ON-OFF
GNSS Desense Test To Capture Constellation Values and Signal Strength Delta With All Cameras On
TEST_DAS_X_GNSS-CAMERA-DESENSE-ALL-CAMERAS-ON
GNSS Desense Test To Capture Constellation Values and Signal Strength Delta With Only Interior Camera On
TEST_DAS_X_GNSS-CAMERA-DESENSE-INTERIOR-CAMERA-ON
Evaluates the Electromagnetic Interference (EMI) difference between the camera and USB On/Off with a Global Navigation Satellite System (GNSS) Spectrum Analyzer Test.
TEST_DAS_X_GNSS-SPECTRUM-CAMERA-USB-ON-OFF
Reboots the Gateway (GTW) immediately and ignores display states. Never run this routine when the vehicle is in use.
PROC_ICE_X_GATEWAY-REBOOT