Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
Model 3, Y, S & X
857 tasks Showing 385–408
Clear filtersRequests infotainment system reboot. Gateway (GTW) does not reboot.
PROC_ICE_X_REBOOT
The procedure runs a staged firmware update after 120 seconds.
PROC_ICE_X_INSTALL-UPDATE
Integrated Dynamic Brake (IDB) Pedal Travel Sensor Calibration
PROC_IDB_CALIBRATE-PEDAL-TRAVEL-SENSOR
Integrated Dynamic Brake (IDB) Pressure Sensor Calibration
PROC_IDB_CALIBRATE-PRESSURE-SENSOR
Tests communication with the Integrated Dynamic Brake (IDB) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_IDB
Verifies selfie cam current draw when IR LED is on
TEST-SELF_VCRIGHT_DAS_INTERIOR-CAMERA-LED
Tests interior camera connection and performs camera firmware update.
PING-HTTP_DAS_X_INTERIOR-CAMERA-SCRIPT
Run interior camera fan to detect noise
PROC_VCRIGHT_DAS_RUN-INTERIOR-CAMERA-FAN
Run interior camera fan and check its RPM
TEST-SELF_VCRIGHT_DAS_INTERIOR-CAMERA-FAN
Run this routine after replacing the Li-Ion Low Voltage (LV) battery. Checks the fitted battery variant, adjusts vehicle configurations to the fitted variant type, and resets the required controllers and battery data.
PROC_VC_X_POST-LI-ION-LV-BATTERY-REPLACEMENT
This routine wil learn vehicle parameters to the radar.
PROC_RADC_X_PLANT-MODE
Moves the left 2nd row seat to the rearward endstop. The seat then moves through its full range to test, then moves to the nominal use position.
PROC_VCSEAT2L_R2-SEAT-FUNCTIONAL-TEST
Tests connection to right b-pillar camera and performs camera firmware update.
PING-HTTP_DAS_L_B-PILLAR-CAMERA-SCRIPT
Tests connection and harness of the left blind spot indicator light controlled by the Left Vehicle Controller (VCLEFT) Electronic Control Unit (ECU).
TEST-SELF_VCLEFT_X_BLIND-SPOT-LED
A consolidation of all the ODIN routines required to be run post replacing a Left controller. The routine will wait for up to 30s for the left seat to be unoccupied and all left hand doors to be closed.
PROC_CONTROLLER_LEFT_POST-REPLACEMENT-PROCEDURE
Tests the power, connection, and communication of the left footwell light controlled by the Left Vehicle Controller (VCLEFT).
TEST-SELF_VCLEFT_X_FOOTWELL-LIGHT
Tests the left front seat track, lift, tilt, and backrest motors, seat heatpad, heatpad thermistor, seatbelt buckle switch, and the backrest, track, and lift switches. This routine measures current draw, detects encoder movement, and verifies communication with the Local Interconnect Network (LIN) to confirm the components are operating as expected. This routine does not test the lumbar components or occupancy switch.
TEST-SELF_VCLEFT_FRONT_SEAT-NO-LUMBAR-NO-OCCUPANCY-SWITCH
Tests current of the front left seat controlled by the Left Electronic Parking Brake (EPBL) Electronic Control Unit (ECU).
TEST-SELF_EPBL_FRONT_SEAT-FAN
Runs several self-tests for the Left Front Seat.
TEST-SELF_VCLEFT_FRONT_SEAT
Tests for power, connection, and communication of the front left seat controlled by the Left Vehicle Controller (VCLEFT).
TEST-SELF_VCLEFT_FRONT_SEAT-NO-LUMBAR
Runs several self-tests for the Left Front Seat.
TEST-SELF_VCLEFT_FRONT_SEAT-NO-OCCUPANCY-SWITCH
Runs several self-tests for the Left Front seat.
TEST-SELF_VCLEFT_FRONT_SEAT-UNIFIED
Moves the front seat thigh support to the rearward endstop to perform position calibration, then moves the thigh support to the nominal use position.
PROC_VCLEFT_FRONT-SEAT-THIGH-SUPPORT-CALIBRATION
Tests electrical connection of the front seat thigh support switchpack, motor, and encoder.
TEST-SELF_VCLEFT_FRONT-SEAT-THIGH-SUPPORT