Electronic stability program alerts
Browse 319 ESP alert codes and open an entry for its description and recorded conditions.
ESP alert codes
Showing 251–300 of 319
- ESP_a251 — Vdc Brke Trq Tar Re R Invalid ESP_a251_vdcBrkeTrqTarReRInvalid ESP CAN - VDC message state fault
- ESP_a252 — Vdc Whl Slip Lim Fr L Invalid ESP_a252_vdcWhlSlipLimFrLInvalid ESP CAN - VDC message state fault
- ESP_a253 — Vdc Whl Slip Lim Fr R Invalid ESP_a253_vdcWhlSlipLimFrRInvalid ESP CAN - VDC message state fault
- ESP_a254 — Vdc Whl Slip Lim Re L Invalid ESP_a254_vdcWhlSlipLimReLInvalid ESP CAN - VDC message state fault
- ESP_a255 — Vdc Whl Slip Lim Re R Invalid ESP_a255_vdcWhlSlipLimReRInvalid ESP CAN - VDC message state fault
- ESP_a256 — Epbm Status Timeout ESP_a256_epbmStatusTimeout The Electronic Stability Program (ESP) electronic control unit (ECU) is not receiving messages from the Electronic Parking Brake Module (EPBM) on the Party controller area network (CAN) bus within the expected time frame.
- ESP_a257 — Epbm Status Checksum ESP_a257_epbmStatusChecksum ESP CAN - EPBM message fault
- ESP_a258 — Epbm Status DLC ESP_a258_epbmStatusDLC ESP CAN - EPBM message fault
- ESP_a259 — Epbm Status Counter ESP_a259_epbmStatusCounter ESP CAN - EPBM message fault
- ESP_a260 — Epbl Status Timeout ESP_a260_epblStatusTimeout The Electronic Stability Program (ESP) electronic control unit (ECU) is not receiving messages from the left Electronic Parking Brake (EPBL) ECU on the Party controller area network (CAN) bus within the expected time frame.
- ESP_a261 — Epbl Status Checksum ESP_a261_epblStatusChecksum ESP CAN - EPBL message fault
- ESP_a262 — Epbl Status DLC ESP_a262_epblStatusDLC ESP CAN - EPBL message fault
- ESP_a263 — Epbl Status Counter ESP_a263_epblStatusCounter ESP CAN - EPBL message fault
- ESP_a264 — Pump Speed Limit Invalid ESP_a264_pumpSpeedLimitInvalid Pump Speed limit from Tesla VDC is received as SNA.
- ESP_a265 — DIREL torque Timeout ESP_a265_DIRELtorqueTimeout The Electronic Stability Program (ESP) electronic control unit (ECU) is not receiving messages from the rear left drive inverter (DIREL) ECU on the Party controller area network (CAN) bus within the expected time frame.
- ESP_a266 — DIREL torque DLC ESP_a266_DIRELtorqueDLC Invalid Data Received From Drive Motor Control Module External Left: Data Length Code, Checksum or Parity invalid
- ESP_a267 — DIREL torque Checksum ESP_a267_DIRELtorqueChecksum Invalid Data Received From Drive Motor Control Module External Left: Data Length Code, Checksum or Parity invalid
- ESP_a268 — DIREL torque Counter ESP_a268_DIRELtorqueCounter Invalid Data Received From Drive Motor Control Module External Left: Alive Counter invalid
- ESP_a269 — DIREL Torque Command Invalid ESP_a269_DIRELTorqueCommandInvalid Invalid Data Received From Drive Motor Control Module External Left: Invalid Signal Status
- ESP_a270 — DIRELR PM Invalid ESP_a270_DIRELRPMInvalid Invalid Data Received From Drive Motor Control Module External Left: Invalid Signal Status
- ESP_a271 — DIREL Torque Actual Invalid ESP_a271_DIRELTorqueActualInvalid Invalid Data Received From Drive Motor Control Module External Left: Invalid Signal Status
- ESP_a272 — DIRER torque Timeout ESP_a272_DIRERtorqueTimeout The Electronic Stability Program (ESP) electronic control unit (ECU) is not receiving messages from the rear right drive inverter (DIRER) ECU on the Party controller area network (CAN) bus within the expected time frame.
- ESP_a273 — DIRER torque DLC ESP_a273_DIRERtorqueDLC Invalid Data Received From Drive Motor Control Module External Right: Data Length Code, Checksum or Parity invalid
- ESP_a274 — DIRER torque Checksum ESP_a274_DIRERtorqueChecksum Invalid Data Received From Drive Motor Control Module External Right: Data Length Code, Checksum or Parity invalid
- ESP_a275 — DIRER torque Counter ESP_a275_DIRERtorqueCounter Invalid Data Received From Drive Motor Control Module External Right: Alive Counter invalid
- ESP_a276 — DIRER Torque Command Invalid ESP_a276_DIRERTorqueCommandInvalid Invalid Data Received From Drive Motor Control Module External Right: Invalid Signal Status
- ESP_a277 — DIRERR PM Invalid ESP_a277_DIRERRPMInvalid Invalid Data Received From Drive Motor Control Module External Right: Invalid Signal Status
- ESP_a278 — DIRER Torque Actual Invalid ESP_a278_DIRERTorqueActualInvalid Invalid Data Received From Drive Motor Control Module External Right: Invalid Signal Status
- ESP_a279 — Lifetime Management Overrun ESP_a279_lifetimeManagementOverrun ESP pump has exceeded 120 hours of runtime
- ESP_a280 — Track Mode ABS Enabled ESP_a280_trackModeABSEnabled The user engages Track Mode for the Anti-lock Braking System (ABS), which allows higher brake wheel slips for better deceleration on closed circuit courses.
- ESP_a281 — Track Mode AB Sdisabled ESP_a281_trackModeABSdisabled The user disengages Track Mode for the Anti-lock Braking System (ABS), which allows the ABS to return to its normal state.
- ESP_a282 — Track Mode ABS Request Invalid ESP_a282_trackModeABSRequestInvalid The DI_trackModeState signal has transitioned, but ESP is unable to follow due to spec
- ESP_a283 — Secondary Collision Mitigation Active ESP_a283_secondaryCollisionMitigationActive The Restraints Control Module (RCM) reports an accident and commands the Electronic Stability Program (ESP) electronic control unit (ECU) to actuate the brakes to prevent a secondary collision.
- ESP_a284 — Scm Request Invalid Checksum ESP_a284_scmRequestInvalidChecksum RCM_collision message received with invalid checksum
- ESP_a285 — Scm Request DLC ESP_a285_scmRequestDLC RCM_collision message received with incorrect byte count
- ESP_a286 — Hydroplane Detected ESP_a286_hydroplaneDetected The Electronic Stability Program (ESP) electronic control unit (ECU) detects that the vehicle is hydroplaning and may activate mitigation logic to limit torque in the rear wheels by engaging the brakes.
- ESP_a287 — Failed Brake Circuit Detected ESP_a287_failedBrakeCircuitDetected A failed brake circuit has been detected; mitigation logic is active to improve braking performance
- ESP_a288 — Left Bus Off ESP_a288_leftBusOff The CAN Bus status is monitored cyclically, when ever there is a short circuit between CAN-H and CAN-L or a heavy bus disturbance which leads to BusOff, the fault is registerd
- ESP_a289 — Left Bus Passive ESP_a289_leftBusPassive The CAN Bus status is monitored cyclically, when ever there is a line interruption on can bus or disturbance which leads to Error passive, fault is registerd
- ESP_a290 — Brake Bus Off ESP_a290_brakeBusOff The CAN Bus status is monitored cyclically, whenever there is a short circuit between CAN-H and CAN-L or a heavy bus disturbance which leads to BusOff, the fault is registered
- ESP_a291 — Brake Bus Passive ESP_a291_brakeBusPassive The CAN Bus status is monitored cyclically, when ever there is a line interruption on can bus or disturbance which leads to Error passive, fault is registerd
- ESP_a292 — PEPS status Timeout ESP_a292_PEPSstatusTimeout Lost Communication With Primary Electric Power Steering: Message Timeout
- ESP_a293 — PEPS status DLC ESP_a293_PEPSstatusDLC PEPS_status message received with incorrect byte count
- ESP_a294 — PEPS status Checksum ESP_a294_PEPSstatusChecksum Invalid Data Received From Steering Angle Sensor Module: Data Length Code, Checksum or Parity invalid
- ESP_a295 — PEPS status Counter ESP_a295_PEPSstatusCounter Invalid Data Received From Steering Angle Sensor Module: Alive Counter invalid
- ESP_a296 — Road Wheel Angle Health Degraded ESP_a296_roadWheelAngleHealthDegraded Signal from PEPS indicates a degradation in road wheel angle
- ESP_a297 — Road Wheel Angle Health Faulted ESP_a297_roadWheelAngleHealthFaulted Signal from PEPS indicates a FAULT in road wheel angle.
- ESP_a298 — RSA rear Steer Status Timeout ESP_a298_RSArearSteerStatusTimeout Lost Communication With Rear Steer Actuator: Message Timeout.
- ESP_a299 — RSA rear Steer Status DLC ESP_a299_RSArearSteerStatusDLC RSA_rearSteerStatus message received with incorrect byte count.
- ESP_a300 — RSA rear Steer Status Checksum ESP_a300_RSArearSteerStatusChecksum Invalid Data Received From Steering Angle Sensor Module: Data Length Code, Checksum or Parity invalid