CP_a102 — Wc Overtemp Fault
Full alert identifier: CP_a102_wcOvertempFault
Message shown in the car
Unable to charge - Wall connection too hot Outlet or Wall Connector wiring must be checked
Alert description
The Gen 2 Wall Connector reports a high temperature at which charging should stop.
Potential impact
AC charging is unavailable.
Set condition
The Gen 2 Wall Connector reports a temperature greater than 90 degrees C.
Clear condition
The CP ECU detects that the charge cable was unplugged.
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of CP_a102.