Primary autopilot processor alerts
Browse 291 APP alert codes and open an entry for its description and recorded conditions.
APP alert codes
Showing 251–291 of 291
- APP_w331 — Fsd Degraded Unavailable APP_w331_fsdDegradedUnavailable Full Self-Driving (FSD) functionality is limited or unavailable.
- APP_w332 — Camera Positions Swapped APP_w332_cameraPositionsSwapped The Autopilot electronic control unit (ECU) detects the camera feeds are swapped.
- APP_w332 — Narrow Fisheye Swapped APP_w332_narrowFisheyeSwapped Narrow camera feed and Fisheye camera feed are swapped
- APP_w333 — Fsd Unavailable Location APP_w333_fsdUnavailableLocation Full Self-Driving (FSD) features are unavailable at current location.
- APP_w334 — Front Camera Occluded APP_w334_frontCameraOccluded The Autopilot electronic control unit (ECU) detects that the field of view on one or more of the forward-facing cameras is persistently occluded (or blocked), which may cause Autopilot functionality to be limited or unavailable.
- APP_w346 — Gps Sw Event APP_w346_gpsSwEvent
- APP_w356 — Driver Overriding APP_w356_driverOverriding The driver overrides the Traffic-Aware Cruise Control (TACC) feature by using the accelerator pedal. This results in Autopilot not applying the brakes, favoring the driver's input instead.
- APP_w360 — Ap Imu Noise Detected APP_w360_apImuNoiseDetected The values provided by the gyroscope of the Autopilot internal inertial measurement unit (IMU) are above a certain threshold compared to the IMU from the Restraint Control Module (RCM).
- APP_w369 — Cruise With Single Click APP_w369_cruiseWithSingleClick Traffic-Aware Cruise Control (TACC) cannot be activated while the Single Click or Single Pull setting is enabled on a vehicle with Autosteer or Full Self-Driving (FSD) enabled in settings. To use TACC, the Double Click or Double Pull setti…
- APP_w370 — Acc Ap Unav User Settings APP_w370_accApUnavUserSettings Traffic-Aware Cruise Control (TACC) or Autosteer is unable to engage due to current Autopilot settings.
- APP_w371 — Network Loading Issue APP_w371_networkLoadingIssue Autopilot vision networks encountered an initialization error and are disabled. Some vision networks require additional initialization.
- APP_w373 — Gnss Uart Error APP_w373_gnssUartError GNSS UART has encountered an error receiving data.
- APP_w374 — Gnss Data Mia APP_w374_gnssDataMia Autopilot board has stopped receiving GNSS UART data.
- APP_w375 — Gnss Pps Mia APP_w375_gnssPpsMia GNSS PPS (Pulse Per Second) signal has stopped being received.
- APP_w376 — Wheeltick Count Mia APP_w376_wheeltickCountMia Wheeltick count signal missing.
- APP_w377 — Ap Imu Mia APP_w377_apImuMia Autopilot IMU readings stopped being received.
- APP_w378 — Ublox Imu Mia APP_w378_ubloxImuMia U-blox IMU readings not received.
- APP_w379 — Positioning Engine Mia APP_w379_positioningEngineMia Positioning engine output not received.
- APP_w380 — Gnss Pps Timestamp Issue APP_w380_gnssPpsTimestampIssue Discontinuity in PPS (Pulse Per Second) output rate.
- APP_w381 — Ap Imu Timestamp Issue APP_w381_apImuTimestampIssue Discontinuity in Autopilot IMU timestamps.
- APP_w382 — Ublox Imu Timestamp Issue APP_w382_ubloxImuTimestampIssue Discontinuity in u-blox IMU timestamps.
- APP_w383 — Many Ap Reboots While In P APP_w383_manyApRebootsWhileInP Autopilot computer has booted a significant number of times while the vehicle is parked.
- APP_w384 — Pos Engine Init In Motion APP_w384_posEngineInitInMotion Positioning engine slow to start up; vehicle has already started moving.
- APP_w385 — Pos Engine Unhealthy APP_w385_posEngineUnhealthy The positioning engine is unhealthy and the Autopilot system is using an alternative GNSS solution.
- APP_w389 — Cam Fov Residue Detected APP_w389_camFovResidueDetected Residue on glass in camera field of view detected.
- APP_w392 — Fsd Suspended APP_w392_fsdSuspended Indicates that Autosteer / Full Self-Driving (FSD) has been suspended.
- APP_w394 — Ap Imu Gross Errors APP_w394_apImuGrossErrors Autopilot IMU gross errors occured.
- APP_w396 — Severe Residue Detected APP_w396_severeResidueDetected Severe dirt and debris on glass in front cameras field of view detected.
- APP_w397 — Ap Feat Disabled Permanent APP_w397_apFeatDisabledPermanent User notification that Autopilot features are not available, and will not become available again until the underlying hardware issue is resolved. The payload signal(s) indicate the specific condition(s) affecting Autopilot functionality.
- APP_w398 — Imu Output Unhealthy APP_w398_imuOutputUnhealthy The Autopilot electronic control unit (ECU) detects issues with the IMU output.
- APP_w406 — Gnss HW Health Degraded APP_w406_gnssHWHealthDegraded There are one or more faults related to the GNSS HW, which makes it unreliable.
- APP_w411 — Backup Camera Occluded APP_w411_backupCameraOccluded Backup camera occlusion is detected when Full Self-Driving (FSD) is enabled.
- APP_w412 — Abort Backup Cam Occluded APP_w412_abortBackupCamOccluded Backup camera occlusion and degraded performance is detected when Full Self-Driving (FSD) is enabled.
- APP_w423 — Camera Vis Pop Up Forward APP_w423_cameraVisPopUpForward The forward facing camera field of view through the windshield is obstructed (debris, condensation, haze, and so on).
- APP_w424 — Camera Vis Pop Up L Pillar APP_w424_cameraVisPopUpLPillar Left pillar camera visibility warning is displayed to the driver.
- APP_w425 — Camera Vis Pop Up R Pillar APP_w425_cameraVisPopUpRPillar Right pillar camera visibility warning is displayed to the driver.
- APP_w426 — Camera Vis Pop Up L Repeater APP_w426_cameraVisPopUpLRepeater Left repeater camera visibility warning is displayed to the driver.
- APP_w427 — Camera Vis Pop Up R Repeater APP_w427_cameraVisPopUpRRepeater Right repeater camera visibility warning is displayed to the driver.
- APP_w428 — Camera Vis Pop Up Backup APP_w428_cameraVisPopUpBackup Backup camera visibility warning is displayed to the driver.
- APP_w429 — Camera Vis Pop Up Fascia APP_w429_cameraVisPopUpFascia Fascia camera visibility warning is displayed to the driver.
- APP_w453 — Driver Cancel Blinker APP_w453_driverCancelBlinker The driver has canceled FSD (Supervised) initiated blinker.