Vehicle security controller alerts

VCSEC alert codes

Showing 151–200 of 322

• VCSEC_a208 — BLE Rear Assert Failure VCSEC_a208_BLERearAssertFailure The rear BLE endpoint failed assert caused by an error in the TI stack
• VCSEC_a209 — BLE Center Assert Failure VCSEC_a209_BLECenterAssertFailure The center BLE endpoint failed assert caused by an error in the TI stack
• VCSEC_a210 — Key Device Battery Low VCSEC_a210_keyDeviceBatteryLow Low battery detected on key device
• VCSEC_a211 — Handle Pull Without Auth VCSEC_a211_handlePullWithoutAuth Door handle pulled without an authenticated device
• VCSEC_a212 — Sniffer RSSIMIA VCSEC_a212_snifferRSSIMIA Connection sniffer endpoints are not reporting connection signal strength
• VCSEC_a213 — Gatt Timeout With Exptd Count VCSEC_a213_gattTimeoutWithExptdCount ATT info response timeout with expected number of ATT counts was observed
• VCSEC_a214 — Gatt Serv False Wait To Boot VCSEC_a214_gattServFalseWaitToBoot GATT server service false waited for the endpoint to boot
• VCSEC_a215 — T PMS Unexpected Disconnect Sensor0 VCSEC_a215_TPMSUnexpectedDisconnectSensor0 TPMS sensor disconnected unexpectedly
• VCSEC_a216 — T PMS Unexpected Disconnect Sensor1 VCSEC_a216_TPMSUnexpectedDisconnectSensor1 TPMS sensor disconnected unexpectedly
• VCSEC_a217 — T PMS Unexpected Disconnect Sensor2 VCSEC_a217_TPMSUnexpectedDisconnectSensor2 TPMS sensor disconnected unexpectedly
• VCSEC_a218 — T PMS Unexpected Disconnect Sensor3 VCSEC_a218_TPMSUnexpectedDisconnectSensor3 TPMS sensor disconnected unexpectedly
• VCSEC_a219 — T PMS Sensor Pairing Removed VCSEC_a219_TPMSSensorPairingRemoved A previously paired sensor identification was removed either automatically or part of diagnostic routine
• VCSEC_a220 — T PMS Sensor Pairing Not Completed VCSEC_a220_TPMSSensorPairingNotCompleted The Tire Pressure Monitoring System (TPMS) pairing process was started but not completed. TPMS will not be fully configured.
• VCSEC_a221 — T PMS Soft Warning VCSEC_a221_TPMSSoftWarning One or more tires may be underinflated or leaking
• VCSEC_a222 — T PMS System Malfunction VCSEC_a222_TPMSSystemMalfunction One or more sensors, or the security controller may be missing or damaged
• VCSEC_a223 — T PMS Fault Sensor0 VCSEC_a223_TPMSFaultSensor0 TPMS sensor is faulted
• VCSEC_a224 — T PMS Fault Sensor1 VCSEC_a224_TPMSFaultSensor1 TPMS sensor is faulted
• VCSEC_a225 — T PMS Fault Sensor2 VCSEC_a225_TPMSFaultSensor2 TPMS sensor is faulted
• VCSEC_a226 — T PMS Fault Sensor3 VCSEC_a226_TPMSFaultSensor3 TPMS sensor is faulted
• VCSEC_a227 — Connection Without Link Event VCSEC_a227_connectionWithoutLinkEvent A connection has been established without VCSEC being informed of it within a second
• VCSEC_a228 — T PMS Hard Warning VCSEC_a228_TPMSHardWarning One or more tires may be flat
• VCSEC_a235 — Present Without Handle Pull VCSEC_a235_presentWithoutHandlePull BLE device went present without user interaction with the vehicle
• VCSEC_a236 — Key Identification Max Attempt Reached VCSEC_a236_keyIdentificationMaxAttemptReached Reached maximum number of attempts to identify a BLE device was reached
• VCSEC_a237 — Key Not Ready To Receive ID Requests VCSEC_a237_keyNotReadyToReceiveIDRequests BLE device is connected without identification beyond 8 seconds.
• VCSEC_a238 — T PMS Locations Updated VCSEC_a238_TPMSLocationsUpdated TPMS localization results changed
• VCSEC_a239 — T PMS Idle Connection VCSEC_a239_TPMSIdleConnection TPMS wheel unit(s) initiated a connection while system is IDLE
• VCSEC_a240 — No Keys Paired VCSEC_a240_noKeysPaired This VCSEC has no customer-usable keys paired to it
• VCSEC_a241 — T PMS Update Started Sensor0 VCSEC_a241_TPMSUpdateStartedSensor0 Security controller has started to send an update to TPMS 0.
• VCSEC_a242 — T PMS Update Started Sensor1 VCSEC_a242_TPMSUpdateStartedSensor1 Security controller has started to send an update to TPMS 1.
• VCSEC_a243 — T PMS Update Started Sensor2 VCSEC_a243_TPMSUpdateStartedSensor2 Security controller has started to send an update to TPMS 2.
• VCSEC_a244 — T PMS Update Started Sensor3 VCSEC_a244_TPMSUpdateStartedSensor3 Security controller has started to send an update to TPMS 3.
• VCSEC_a245 — T PMS Update Interrupted Sensor0 VCSEC_a245_TPMSUpdateInterruptedSensor0 Security controller could not update TPMS 0 but may try again.
• VCSEC_a246 — T PMS Update Interrupted Sensor1 VCSEC_a246_TPMSUpdateInterruptedSensor1 Security controller could not update TPMS 1 but may try again.
• VCSEC_a247 — T PMS Update Interrupted Sensor2 VCSEC_a247_TPMSUpdateInterruptedSensor2 Security controller could not update TPMS 2 but may try again.
• VCSEC_a248 — T PMS Update Interrupted Sensor3 VCSEC_a248_TPMSUpdateInterruptedSensor3 Security controller could not update TPMS 3 but may try again.
• VCSEC_a249 — T PMS Update Complete Sensor0 VCSEC_a249_TPMSUpdateCompleteSensor0 Security controller has successfully updated sensor 0.
• VCSEC_a250 — T PMS Update Complete Sensor1 VCSEC_a250_TPMSUpdateCompleteSensor1 Security controller has successfully updated sensor 1.
• VCSEC_a251 — T PMS Update Complete Sensor2 VCSEC_a251_TPMSUpdateCompleteSensor2 Security controller has successfully updated sensor 2.
• VCSEC_a252 — T PMS Update Complete Sensor3 VCSEC_a252_TPMSUpdateCompleteSensor3 Security controller has successfully updated sensor 3.
• VCSEC_a253 — T PMS Low Battery VCSEC_a253_TPMSLowBattery One or more sensors have indicated a low battery
• VCSEC_a254 — Whitelist Updated Key VCSEC_a254_whitelistUpdatedKey Updated public key in the whitelist. For informational purposes only
• VCSEC_a255 — Wlist Updated Permission VCSEC_a255_wlistUpdatedPermission Updated permission for public key. For informational purposes only
• VCSEC_a256 — Whitelist Operation Fail VCSEC_a256_whitelistOperationFail Key whitelist operation failed
• VCSEC_a257 — Connected Key Is Expiring VCSEC_a257_connectedKeyIsExpiring Connected Key is expiring. will be removed in 10mins. For informational purposes only
• VCSEC_a258 — Key Is Expiring VCSEC_a258_keyIsExpiring A Key is expiring. will be removed in 10mins. For informational purposes only
• VCSEC_a260 — Prsnt Phone Key Disconnected VCSEC_a260_prsntPhoneKeyDisconnected The phone key has been disconnected from the vehicle.
• VCSEC_a261 — T PMS Factory Learn Active VCSEC_a261_TPMSFactoryLearnActive The TPMS Factory Autolearn Procedure is activated
• VCSEC_a262 — Flow Control Backed Up VCSEC_a262_flowControlBackedUp Flow control for the Universal Message protocol was backed up and could not be sent
• VCSEC_a263 — Dispatch Could Not Be Completed VCSEC_a263_dispatchCouldNotBeCompleted Dispatch to an entity could not be completed
• VCSEC_a264 — No One Populated Message VCSEC_a264_noOnePopulatedMessage A protobuf message was scheduled to be transmitted but no one filled it out