Left vehicle controller alerts

VCLEFT1 alert codes

Showing 51–100 of 115

• VCLEFT1_a176 — Csm Apply Failed VCLEFT1_a176_csmApplyFailed Electronic Parking Brake apply failed.
• VCLEFT1_a177 — Csm Apply Retry VCLEFT1_a177_csmApplyRetry Electronic Parking Brake apply was interrupted. Apply will be retried.
• VCLEFT1_a178 — Caliper State Unknown VCLEFT1_a178_caliperStateUnknown Electronic Parking Brake was not able to determine caliper state on boot.
• VCLEFT1_a179 — Epb Problem VCLEFT1_a179_epbProblem Customer facing alert for Electronic Parking Brake issues which occur when caliper is not moving
• VCLEFT1_a180 — Dynamic Active VCLEFT1_a180_dynamicActive Customer facing alert issued when Electronic Parking Brake is applied at higher than 5mph
• VCLEFT1_a181 — Too Steep Grade To Park VCLEFT1_a181_TooSteepGradeToPark Road grade is too steep to secure with Park Brake
• VCLEFT1_a182 — One EPB Applied Unsec Env VCLEFT1_a182_OneEPBAppliedUnsecEnv One Electronic Parking Brake (EPB) not applied, and road grade is too steep to secure vehicle with only one EPB
• VCLEFT1_a183 — Cdp Not Available VCLEFT1_a183_cdpNotAvailable Stability Control reports Controlled Deceleration for Parking Brake is not available when car is in DRIVE
• VCLEFT1_a184 — Dynamic Park Abort VCLEFT1_a184_dynamicParkAbort Non-nominal termination of dynamic park
• VCLEFT1_a185 — Summon Aborted VCLEFT1_a185_summonAborted
• VCLEFT1_a186 — External Park Abort VCLEFT1_a186_externalParkAbort Non-nominal termination of external park
• VCLEFT1_a187 — Cdp Dynamic VCLEFT1_a187_cdpDynamic Stability Control has begun Controlled Deceleration for Parking Brake
• VCLEFT1_a188 — Epb Dynamic VCLEFT1_a188_epbDynamic Electronic Parking Brake is performing dynamic apply
• VCLEFT1_a189 — Epb Dynamic Park Canceled VCLEFT1_a189_epbDynamicParkCanceled Electronic Parking Brake was attempting to dynamic park, Controlled Deceleration for Parking Brake is unavailable, and speed crossed above 8.8kph
• VCLEFT1_a190 — Csm Apply Degraded VCLEFT1_a190_csmApplyDegraded Electronic Parking Brake apply failed.
• VCLEFT1_a191 — Csm Release Degraded VCLEFT1_a191_csmReleaseDegraded Electronic Parking Brake was unable to release fully.
• VCLEFT1_a195 — Park For Driver Is Leaving VCLEFT1_a195_parkForDriverIsLeaving The Electronic Parking Brake (EPB) reports the driver is leaving and parks the vehicle.
• VCLEFT1_a196 — Free Roll Mode Active VCLEFT1_a196_freeRollModeActive will prevent EPB from parking when the driver leaves
• VCLEFT1_a197 — Free Roll Mode At Speed VCLEFT1_a197_freeRollModeAtSpeed If vehicle reaches 8.8kph, EPB will park
• VCLEFT1_a198 — Hold Clamp Complete VCLEFT1_a198_holdClampComplete EPB hold clamp finished, log I, V, and calculated R
• VCLEFT1_a200 — Pm Unpark Not Allowed VCLEFT1_a200_PmUnparkNotAllowed DI requested unpark but PM didn't allow it
• VCLEFT1_a202 — Remote Epb Config Incompatible VCLEFT1_a202_remoteEpbConfigIncompatible EPB's brake HW config is not compatible remote EPB's brake HW config
• VCLEFT1_a203 — Hw Brake Type Mismatch VCLEFT1_a203_hwBrakeTypeMismatch Electronic Parking Brake's learned configuration does not match the reported config from the gateway
• VCLEFT1_a210 — Park For Driver Is Leaving Debug VCLEFT1_a210_parkForDriverIsLeavingDebug The Electronic Parking Brake (EPB) reports the driver is leaving and parks the vehicle.
• VCLEFT1_a216 — SPI MIA debug Data1 VCLEFT1_a216_SPI_MIA_debugData1 The communication link between Electronic Parking Brake and Electronic Parking Brake Monitor has encountered an error.
• VCLEFT1_a217 — SPI MIA debug Data2 VCLEFT1_a217_SPI_MIA_debugData2 The communication link between Electronic Parking Brake and Electronic Parking Brake Monitor has encountered an error.
• VCLEFT1_a225 — Epb Active Decel VCLEFT1_a225_epbActiveDecel Stability Control has begun Controlled Deceleration for Parking Brake
• VCLEFT1_a241 — Di Output Locked VCLEFT1_a241_diOutputLocked A request to change the DI power state has been denied.
• VCLEFT1_a242 — Hv Output Locked VCLEFT1_a242_hvOutputLocked A request to change the HVC or Contactor power state has been denied.
• VCLEFT1_a243 — Bdw Unavailable VCLEFT1_a243_bdwUnavailable Brake Disc Wipe algorithm is not running due to loss of input signal(s)
• VCLEFT1_a244 — Winch Mode Active VCLEFT1_a244_WinchModeActive Non user facing alert set for service set when winch mode is active
• VCLEFT1_a245 — Service Mode Active VCLEFT1_a245_serviceModeActive User facing to warn that Electronic Parking Brake is in service mode and many Electronic Parking Brake features are disabled
• VCLEFT1_a246 — Idle Fault Apply VCLEFT1_a246_idleFaultApply Electronic Parking Brake apply failed due to idle fault
• VCLEFT1_a247 — Csm Dynamic Apply Retry VCLEFT1_a247_csmDynamicApplyRetry Electronic Parking Brake apply was interrupted during dynamic apply. Apply will be retried.
• VCLEFT1_a248 — Csm Dynamic Apply Failed VCLEFT1_a248_csmDynamicApplyFailed Electronic Parking Brake apply was interrupted during dynamic apply. Apply failed.
• VCLEFT1_a249 — Idle Fault Release VCLEFT1_a249_idleFaultRelease Electronic Parking Brake release failed due to idle fault
• VCLEFT1_a250 — Winch Mode Canceled VCLEFT1_a250_WinchModeCanceled Electronic Parking Brake has detected a vehicle speed condition that caused it to exit winch mode.
• VCLEFT1_a251 — Current Variance High VCLEFT1_a251_currentVarianceHigh Electronic Parking Brake noticed very noisy current
• VCLEFT1_a252 — Winch Mode Pending VCLEFT1_a252_winchModePending Electronic Parking Brake is preparing to enter winch mode
• VCLEFT1_a253 — Esm Release Blocked VCLEFT1_a253_esmReleaseBlocked Electronic Parking Brake is preventing calipers from opening
• VCLEFT1_a254 — Show Stalk Park Button Fault On Ui VCLEFT1_a254_showStalkParkButtonFaultOnUi Electronic Parking Brake has determined that the drive stalk park button has faulted and UI alert should be set allowing driver to park through UI
• VCLEFT1_a256 — Epb System Apply VCLEFT1_a256_epbSystemApply EPB parked the vehicle for a system reason
• VCLEFT1_a261 — Winch Mode Without Steering VCLEFT1_a261_winchModeWithoutSteering The Electronic Parking Brake (EPB) enabled Winch Mode but did not receive the expected messages from the steering system.
• VCLEFT1_a262 — Cannot Prepare Winch Mode VCLEFT1_a262_cannotPrepareWinchMode Non user facing alert set when user attempts to enter winch mode but a system reason prevents EPB from activating winch mode
• VCLEFT1_a263 — Epb Recovery Park VCLEFT1_a263_epbRecoveryPark The Electronic Parking Brake (EPB) attempted to park to establish vehicle security for Low Voltage system recovery.
• VCLEFT1_a264 — Winch Mode Deactivated VCLEFT1_a264_winchModeDeactivated Non user facing alert set when winch mode deactivates
• VCLEFT1_a272 — Vhcl Pwr State Msmtch VCLEFT1_a272_vhclPwrStateMsmtch Vehicle attempted a power state transition which the Electronic Parking Brake did not agree with.
• VCLEFT1_a300 — Left Right Confusion VCLEFT1_a300_leftRightConfusion Electronic Parking Brake not sure if it is a left or a right.
• VCLEFT1_a301 — Ooc Speed Violation VCLEFT1_a301_oocSpeedViolation Vehicle speed is limited based on ultrasonic distance measurements. Currently in ghosted alert.
• VCLEFT1_a302 — Csm Long Release VCLEFT1_a302_csmLongRelease EPB releases no-load is measured using derivative of current. Currently in ghosted alert.