Left vehicle controller alerts

VCLEFT1 alert codes

Showing 101–115 of 115

• VCLEFT1_a303 — Clamping Occured Early VCLEFT1_a303_clampingOccuredEarly When EPB was applying the current measured went above the max no load current before piston position estimate predicted it would.
• VCLEFT1_a350 — Ens Out Of Range VCLEFT1_a350_ensOutOfRange The Emergency Notification Signal (ENS) harness may be disconnected or the Restraints Control Module (RCM) may be missing (MIA).
• VCLEFT1_a353 — Missing Speed Unable To Park VCLEFT1_a353_missingSpeedUnableToPark EPB speed class is currently UNKNOWN and is not parked.
• VCLEFT1_a354 — Parked For Low Brake Fluid Mode VCLEFT1_a354_parkedForLowBrakeFluidMode Vehicle was in factory mode with low brake fluid and brake pedal was pressed causing EPB to park.
• VCLEFT1_a355 — Brake Hw And Epb Hw Mismatch VCLEFT1_a355_brakeHwAndEpbHwMismatch EPB calculate brake hw config and epb hw config independently and checks they are the same
• VCLEFT1_a356 — Parking For Stationary Detect VCLEFT1_a356_parkingForStationaryDetect Startionary detect can park vehicle if all speed sources are MIA and algo detects no motion.
• VCLEFT1_a357 — Brakes Too Hot For Slope VCLEFT1_a357_brakesTooHotForSlope Brake temperature is above 200C and slope is greater than 10%
• VCLEFT1_a358 — Brakes Too Hot For Slope With Only One Epb VCLEFT1_a358_brakesTooHotForSlopeWithOnlyOneEpb Brake temperature is above 200C and slope is greater than 5%
• VCLEFT1_a360 — Ibst Brake Switch Invalid VCLEFT1_a360_ibstBrakeSwitchInvalid EPB defaults to using IBST for brake switch detection but will fallback to ESP if IBST invalid
• VCLEFT1_a361 — Esp Brake Switch Invalid VCLEFT1_a361_espBrakeSwitchInvalid EPB defaults to using IBST for brake switch detection but will fallback to ESP if IBST invalid
• VCLEFT1_a362 — Ibst Pressed Esp Not Pressed Mismatch VCLEFT1_a362_ibstPressedEspNotPressedMismatch IBST detected brake pressed and ESP did not detected brake pressed
• VCLEFT1_a363 — Ibst Not Pressed Esp Pressed Mismatch VCLEFT1_a363_ibstNotPressedEspPressedMismatch IBST detected brake not pressed and ESP detected brake pressed
• VCLEFT1_a364 — Esp Master Cyl Comp Over Threshold VCLEFT1_a364_espMasterCylCompOverThreshold The ESP_masterCylOffsetComp signal was over the maximum expected value for 500ms
• VCLEFT1_a365 — Too Steep To Park With Trailer Warning VCLEFT1_a365_TooSteepToParkWithTrailerWarning Road grade is too steep to secure vehicle and trailer with Park Brake
• VCLEFT1_a366 — Too Steep To Park With Trailer Un Sec Env VCLEFT1_a366_TooSteepToParkWithTrailerUnSecEnv One Electronic Parking Brake (EPB) not applied, and road grade is too steep to secure vehicle and trailer with only one EPB