Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
Model 3, Y, S & X
676 tasks Showing 169–192
Clear filtersThe procedure generates a system report that displays memory, Central Processing Unit (CPU), task and swap utilization followed by currently running tasks. This is useful for checking a process for excessive memory or CPU usage.
TEST-BASH_ICE_X_TOP
Calibrates the center display tilt mechanism actuators. Display will tilt during the calibration.
PROC_VCLEFT_DISPLAY-MECH-CALIBRATE
Tests all (center, instrument cluster unit, rear) displays for power and connection
PING-BASH_DISPLAY_ALL
Tests communication with the Drive Interface (DI) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_DI
Tests Controller Area Network (CAN) communication with the pedal monitor (PM).
PING-TP_PM
Restores the Drive Inverter Front (DIF) application data from the most recent backup on the car computer and configures the Usage ID after a DIF replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.
PROC_DIF_X_LEGACY-RESTORE-ENTRYPOINT
Restores the Drive Inverter Front (DIF) bootloader data from the most recent backup on the car computer and configures the Usage ID after a DIF replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.
PROC_PMF_X_LEGACY-RESTORE-ENTRYPOINT
Restores the Drive Inverter Rear (DIR) application data from the most recent backup on the car computer and configures the Usage ID after a DIR replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.
PROC_DIR_X_LEGACY-RESTORE-ENTRYPOINT
Restores the Drive Inverter Rear (DIR) bootloader data from the most recent backup on the car computer and configures the Usage ID after a DIR replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.
PROC_PMR_X_LEGACY-RESTORE-ENTRYPOINT
Restores the Drive Inverter Rear Left (DIREL) application data from the most recent backup on the car computer and configures the Usage ID after a DIREL replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.
PROC_DIREL_X_LEGACY-RESTORE-ENTRYPOINT
Restores the Drive Inverter Rear Left (DIREL) bootloader data from the most recent backup on the car computer and configures the Usage ID after a DIREL replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.
PROC_PMREL_X_LEGACY-RESTORE-ENTRYPOINT
Tests communication with the Drive Inverter Rear Left (DIREL) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_DIREL
Restores the Drive Inverter Rear Right (DIRER) application data from the most recent backup on the car computer and configures the Usage ID after a DIRER replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.
PROC_DIRER_X_LEGACY-RESTORE-ENTRYPOINT
Restores the Drive Inverter Rear Right (DIRER) bootloader data from the most recent backup on the car computer and configures the Usage ID after a DIRER replacement. Run this routine only after a new compatible drive inverter is installed. After successfully completing, this procedure fails if run multiple times.
PROC_PMRER_X_LEGACY-RESTORE-ENTRYPOINT
Tests communication with the Drive Inverter Rear Right (DIRER) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_DIRER
Tests the ultrasonic sensor of the driver side Falcon roof to ensure it is functioning correctly when no obstacle is present.
TEST-SELF_BCFALCD_DRV_USS-ROOF-WITHOUT-OBSTACLE
Tests the ultrasonic sensor of the driver side Falcon door to ensure it is functioning correctly when no obstacle is present.
TEST-SELF_BCFALCD_DRV_USS-DOOR-WITHOUT-OBSTACLE
Calibrates the left front door actuator brake by opening the door and slightly moving the door 5 times in both the open and close directions.
TEST-SELF_BCFDM_FRONT-DRV_PFD-ACTUATOR-CAL-V2
Increases the force required to close the driver front door for the BCFDM ECU.
PROC_BCFDM_FRONT-DRV-PFD-SET-CLOSE-CALIBRATION-HEAVIER
Decreases the force required to close the driver front door for the BCFDM ECU.
PROC_BCFDM_FRONT-DRV-PFD-SET-CLOSE-CALIBRATION-LIGHTER
Increases the force required to open the driver front door for the BCFDM ECU.
PROC_BCFDM_FRONT-DRV-PFD-SET-OPEN-CALIBRATION-HEAVIER
Decreases the force required to open the driver front door for the BCFDM ECU.
PROC_BCFDM_FRONT-DRV-PFD-SET-OPEN-CALIBRATION-LIGHTER
Executes a routine to fold the Driver mirror
PROC_BCFDM_MIRROR-FOLD
Executes a routine to unfold the Driver mirror
PROC_BCFDM_MIRROR-UNFOLD