Performs a Drive Inverter Front (DIF) restore from the latest application data backup saved onto the car computer. This should only be run after the restore bootloader data routine.
Requirements:
- New compatible drive inverter is installed.
- DIF Bootloader Data Restore routine passed successfully.
- DIF software is updated.
PROC_DIF_X_ECU-REPLACEMENT-RESTORE-APP
Model 3 / Y
Model S / X (2021+)
Saves the bootloader and application data backup snapshot from the Drive Inverter Front (DIF) on the car computer.
The backup data is needed when performing a drive inverter replacement.
PROC_DIF_X_ECU-REPLACEMENT-STORE
Model 3 / Y
Model S / X (2021+)
Sets the usage ID for the Front Drive Inverter (DIF) and restores the bootloader data from the last backup saved onto the car computer.
Requirements:
- New compatible drive inverter is installed.
PROC_DIF_X_ECU-REPLACEMENT-RESTORE-BOOT
Model 3 / Y
Model S / X (2021+)
Checks the communication of the Front Drive Inverter (DIF) Electronic Control Unit (ECU).
Communication is established through Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
When communication is established, the test will succeed. If the test fails, inspect the wiring and confirm the ECU is powered.
PING-TP_DIF
Model 3 / Y
Model S / X (2021+)
Resets the Front Drive Inverter (DIF) Electronic Control Unit (ECU). Reset is executed through Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
TEST-RESET_DIF
Model 3 / Y
Model S / X (2021+)
Turns on the side and rear view mirrors dimming for two minutes.
PROC_X_FRONT_DIM-MIRRORS
Model 3 / Y
Model S / X (2021+)
Performs a Drive Inverter Rear (DIR) restore from the latest application data backup saved onto the car computer. This should only be run after the restore bootloader data routine.
Requirements:
- New compatible drive inverter is installed.
PROC_DIR_X_ECU-REPLACEMENT-RESTORE-APP
Model 3 / Y
Model S / X (2021+)
This routine saves a PMR and DIR bootloader and application data backup snapshot from the installed drive inverter onto the car computer.
The backup data is needed when performing a drive inverter replacement.
PROC_DIR_X_ECU-REPLACEMENT-STORE
Model 3 / Y
Model S / X (2021+)
This routine sets the usage id for the rear inverter and restores the bootloader data from the latest data backup saved onto the car computer.
Requirements:
- New compatible drive inverter is installed
PROC_DIR_X_ECU-REPLACEMENT-RESTORE-BOOT
Model 3 / Y
Model S / X (2021+)
Tests the communication of the Rear Drive Inverter (DIR) Electronic Control Unit (ECU).
Communication is established via UDS over the Controller Area Network (CAN).
When communication is established, the test will succeed. If the test fails, inspect the wiring and confirm the ECU is powered.
PING-TP_DIR
Model 3 / Y
Model S / X (2021+)
Resets the Rear Drive Inverter (DIR) Electronic Control Unit (ECU). Reset is executed through Unified Diagnostics Services (UDS) over the Controller Area Network (CAN). inverter (DIR) Electronic Control Unit (ECU).
TEST-RESET_DIR
Model 3 / Y
Model S / X (2021+)
Lists the files in a given directory on the car computer.
This routine is flexible and may be used to explore the filesystem, but not all directories are readable.
The filter input can be used to limit the results.
For example, listing everything in /dev may yield over 400 results but filtering for 'mmcblk' will only show eMMC devices.
TEST-BASH_ICE_X_LS
Model 3 / Y
Model S / X (legacy)
Model S / X (2021+)
Performs a Drive Inverter Rear Left (DIREL) restore from the latest application data backup saved onto the car computer. This should only be run after the restore bootloader data routine.
Requirements:
- New compatible drive inverter is installed.
PROC_DIREL_X_ECU-REPLACEMENT-RESTORE-APP
Model S / X (2021+)
This routine saves a PMREL and DIREL bootloader and application data backup snapshot from the installed drive inverter onto the car computer.
The backup data is needed when performing a drive inverter replacement.
PROC_DIREL_X_ECU-REPLACEMENT-STORE
Model S / X (2021+)
This routine sets the usage id for the rear left inverter and restores the bootloader data from the latest data backup saved onto the car computer.
Requirements:
- New compatible drive inverter is installed
PROC_DIREL_X_ECU-REPLACEMENT-RESTORE-BOOT
Model S / X (2021+)
Performs a Drive Inverter Rear Right (DIRER) restore from the latest application data backup saved onto the car computer. This should only be run after the restore bootloader data routine.
Requirements:
- New compatible drive inverter is installed.
PROC_DIRER_X_ECU-REPLACEMENT-RESTORE-APP
Model S / X (2021+)
This routine saves a PMRER and DIRER bootloader and application data backup snapshot from the installed drive inverter onto the car computer.
The backup data is needed when performing a drive inverter replacement.
PROC_DIRER_X_ECU-REPLACEMENT-STORE
Model S / X (2021+)
This routine sets the usage id for the rear right inverter and restores the bootloader data from the latest data backup saved onto the car computer.
Requirements:
- New compatible drive inverter is installed
PROC_DIRER_X_ECU-REPLACEMENT-RESTORE-BOOT
Model S / X (2021+)
Disables the hard stop feature on the front passenger seat. This allows the seat to travel beyond its set physical travel limits. The hard stop feature must be re- enabled after running this routine.
PROC_VCSEATP_FRONT-SEAT-DISABLE-HARD-STOP
Model S / X (2021+)
Disarms the Restraints Control Module (RCM)
PROC_RCM_DISARM
Model 3 / Y
Model S / X (2021+)
Lists the amount of free disk space on each partition.
TEST-BASH_ICE_X_DF
Model 3 / Y
Model S / X (legacy)
Model S / X (2021+)
Checks disk usage in a list of paths. Use this task when the filesystem is running low on free disk space (see Disk Space Check).
The results include a number in Megabytes for each directory.
TEST-BASH_ICE_X_CHECK-DISK-USAGE
Model 3 / Y
Model S / X (legacy)
Model S / X (2021+)
Test the functionality of the center display tilt mechanism actuators.
Display will tilt left and right during the test.
TEST-SELF_VCLEFT_X_DISPLAY-ACTUATORS
Model S / X (2021+)
Test the functionality of the center display tilt mechanism
PROC_VCLEFT_DISPLAY-MECH-TEST
Model S / X (2021+)