Skip to content

Tesla service tasks.

Find the procedure. Understand what it does. Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.

1,357

service tasks

Model 3, Y, S & X

Find a service task

676 tasks Showing 49–72

Clear filters
Service procedures

Calibrate Air Suspension

Calibrate the ride height of the Tesla Air Suspension (TAS).

PROC_TAS_X_CALIBRATE-RIDE-HEIGHT-PACK

Model S / X (2021+)
Service procedures

Calibrate Driver Seat, Steering Column, and Mirrors

Depending on the vehicle type, this routine runs the appropriate calibration routines for profile-managed positions.

PROC_CALIBRATE-DRIVER-SEAT-STEERING-MIRRORS

Model 3 / Y Model S / X (2021+)
Service procedures

Calibrate Left FOOTWELL LED

The procedure calibrates the left footwell LED light controlled by the Left Vehicle Controller (VCLEFT). During calibration, the light may not illuminate.

PROC_VCLEFT_LEFT_CALIBRATE-FOOTWELL-LED

Model 3 / Y Model S / X (2021+)
Service procedures

Calibrate Right FOOTWELL LED

The procedure calibrates the right footwell LED light controlled by the Right Vehicle Controller (VCRIGHT). During calibration, the light might not illuminate.

PROC_VCRIGHT_RIGHT_CALIBRATE-FOOTWELL-LED

Model 3 / Y Model S / X (2021+)
Service procedures

Camera Calibration Status Check

Returns the calibration progress and status for each camera. This task fails if any camera is uncalibrated.

PROC_ICE_X_CAMERA-CALIBRATION-STATUS

Model 3 / Y Model S / X (2021+)
Communication checks

Camera Fan Test

Camera Fan Test

PING-HTTP_DAS_X_CAMERA-FAN-SCRIPT

Model 3 / Y Model S / X (2021+)
Self-tests

Camera Heater B-Pillar Test

Executes a test to briefly turn on the b-pillar camera heater and verify it draws a minimum amount of current to confirm connectivity

TEST-SELF_VCLEFT_X_CAMERA-HEATER-B-PILLAR

Model 3 / Y Model S / X (2021+)
Self-tests

Camera Heater B-Pillar Test

Executes a test to briefly turn on the b-pillar camera heater and verify it draws a minimum amount of current to confirm connectivity

TEST-SELF_VCRIGHT_X_CAMERA-HEATER-B-PILLAR

Model 3 / Y Model S / X (2021+)
Service procedures

Capture Screenshot

Captures screenshots of each display. When connected locally, the screenshots are returned for download.

PROC_CID_X_CAPTURE-SCREENSHOT

Model 3 / Y Model S / X (legacy) Model S / X (2021+)
Service procedures

Car Computer Keep Awake

Send a keep-awake request to the gateway for 15 minutes

PROC_ICE_X_KEEP-AWAKE

Model 3 / Y Model S / X (legacy) Model S / X (2021+)
Diagnostic tests

Car Status Check

Creates a report of vehicle states such as UI Mode, BMS State, Timezone, and more. Use this routine to verify vehicle states before performing a remote repair.

TEST-BASH_ICE_X_CAR-STATUS

Model 3 / Y Model S / X (legacy) Model S / X (2021+)
Service procedures

Carbon Ceramic Brakes Configuration Update

Updates the following GTW configurations brakeHwType->0x0A, epblHwType->0x07, and epbrHwType->0x07. Clears and relearns HW type on EPBL and EPBR. Triggers a service firmware redeploy.

PROC_BRAKE_X_CARBON-BRAKES-CONFIG-UPDATE

Model S / X (2021+)
Service procedures

Carbon Ceramic Brakes Uninstall - Configuration Reset

Updates the following GTW configurations brakeHwType->0x0B, epblHwType->0x06, and epbrHwType->0x06. Clears and relearns HW type on EPBL and EPBR. Triggers a service firmware redeploy.

PROC_BRAKE_X_CARBON-BRAKES-CONFIG-RESET

Model S / X (2021+)
Communication checks

Center Display Test

Tests center display for power and connection

PING-BASH_DISPLAY_CENTER

Model S / X (2021+)
Service procedures

Change Display Language

Change the UI display language to the selected language. Must be in Service Mode.

PROC_ICE_X_CHANGE-DISPLAY-LANGUAGE

Model 3 / Y Model S / X (legacy) Model S / X (2021+)
Communication checks

Charge Port Connection Test

Tests communication with the Charge Port (CP) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).

PING-TP_CP

Model 3 / Y Model S / X (2021+)
Self-tests

Charge Port EVSE Sensing Test

Tests charge port Electric Vehicle Supply Equipment (EVSE) sensing.

TEST-SELF_CP_X_EVSE-SENSING

Model 3 / Y Model S / X (2021+)
Self-tests

Charge Port HV Harness Test

Performs a High Voltage (HV) harness test.

TEST-SELF_CP_X_HV_HARNESS

Model 3 / Y Model S / X (2021+)
Self-tests

Charge Port UHF Test

Charge port UHF (ultra-high frequency) antenna test. For 2021+ Model S/X this ODIN routine should only be used prior 1 FEB 2022 build date.

TEST-SELF_CP_X_UHF

Model 3 / Y Model S / X (2021+)
Self-tests

Check 2R Center Seatbelt Buckle Switch Connection

Tests if the second row (2R) center seatbelt buckle switch is electrically connected and can detect the seatbelt latching state by performing an endpoint test.

TEST-SELF_VCRIGHT_2R_P2-MS-C-BUCKLE

Model S / X (2021+)