Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
Model 3, Y, S & X
421 tasks Showing 73–96
Clear filtersThis routine will clear the BMS pack contactor open under load counter. This routine shall ONLY be executed after installing new pack contactors or on rare occasion when instructed to do so by engineering.
PROC_BMS_X_CLEAR-CTC-OPEN-LOAD
This routine will clear the BMS pack contactor stress value for both contactors and in effect, clear BMS_u019_Acceleration_Reduced alert. This routine shall ONLY be executed after installing new pack contactors or on rare occasion when instructed to do so by engineering. See Toolbox Article 32782 for more information.
PROC_BMS_X_CLEAR-CONTACTOR-STRESS
This routine will clear the BMS pack contactors wide open throttle (WOT) counter. This routine shall ONLY be executed after installing new pack contactors or on rare occasion when instructed to do so by engineering.
PROC_BMS_X_CLEAR-CONTACTOR-WOT-COUNTER
This routine clears the BMS SOC1 snapshot which in effect clears all HV battery brick weak short metrics/alerts. This routine shall ONLY be executed after installing a new/remanufactured HV battery or on rare occasion when instructed to do so by engineering. The routine will clear BMS_w117_SW_Delta_SOC_Weak_Short and BMS_u029_dSoc_Limiting if actively set on the vehicle.
PROC_BMS_X_CLEAR-SOC1-SNAPSHOT
Clears cache and temp files located in /home/tesla and /home/mediaserver
PROC_ICE_X_CLEAR-CACHE
The procedure clears the chromium app caches to free up disk space.
PROC_ICE_X_CLEAR-CHROMIUM-CACHE
This task will clear the disable fast charge flag on the charger. This flag can become set if the charger detects low differential resistance on the FC link during the leakage test.
PROC_CHG_X_CLEAR-FAST-CHARGE-DISABLED
The procedure clears the Drivenotes folder to free up disk space.
PROC_ICE_X_CLEAR-DRIVENOTES
The procedure clears the Lost and Found folder to free up disk space.
PROC_ICE_X_CLEAR-LOST-FOUND
The procedure clears infotainment map cache to free up disk space. Confirm map cache is over 2.1GB.
PROC_ICE_X_CLEAR-MAP-CACHE
The procedure clears the media server caches to free up disk space.
PROC_ICE_X_CLEAR-MEDIA-CACHE
This routine will clear the negative pack contactor welded alert, BMS_w/f153_SW_neg_contactor_welded. This routine routine shall ONLY be executed after installing new pack contactors or on rare occasion when instructed to do so by engineering.
PROC_BMS_X_CLEAR-WELDED-NEGATIVE-CONTACTOR-ALERT
This routine will clear the positive pack contactor welded alert, BMS_w/f152_SW_pos_contactor_welded. This routine routine shall ONLY be executed after installing new pack contactors or on rare occasion when instructed to do so by engineering.
PROC_BMS_X_CLEAR-WELDED-POSITIVE-CONTACTOR-ALERT
The procedure allows remote Service Alerts and remote notifications to be cleared.
PROC_ICE_X_CLEAR-REMOTE-ALERTS
The procedure clears the Spotify cache to free up disk space.
PROC_ICE_X_CLEAR-SPOTIFY-CACHE
The procedure clears existing Spotify credentials.
PROC_ICE_X_CLEAR-SPOTIFY-CREDS
The procedure clears all updater backups from the Infotainment and Connectivity ECU (ICE). This Task will only run if the filesystem has run out of inodes, otherwise it will cancel.
PROC_ICE_X_CLEAR-UPDATER-BACKUPS
Tests communication with the Compressor (CMP) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_CMP
Configures connected charger as Master. Script Designed to work together with PROC_CHG_X_CHARGER-STATUS Works only with Gen1 and Gen2 chargers. Before performing configuration; -Enter service mode and perform GTW unlock procedure.
PROC_CHG_X_CHARGER-CONFIG-SET-MASTER
Configures connected charger as Slave. Script Designed to work together with PROC_CHG_X_CHARGER-STATUS Works only with Gen1 and Gen2 chargers. Before performing configuration; -Enter service mode and perform GTW unlock procedure.
PROC_CHG_X_CHARGER-CONFIG-SET-SLAVE
This routine is used specifically in Model S with a front permanent magnet drive unit, and the rear Small Drive Unit (SDU) has an electricaloil pump. This routine configures the rear oil pump after installation. ONLY the rear pump is required to be connected, and the oil pump installed into the front drive unit shall remain disconnected, in order for the routine to be run successfully.
PROC_PMS_REAR_WRITE-OPC-TYPE
Exit service mode on Continental air suspension
PROC_EAS_X_FINISH-SERVICE
Levels the Continental Air Suspension to the selected target height. Low = 3, Standard = 4, High = 5, Very High = 6.
PROC_EAS_X_LEVEL-TO-HEIGHT
Calibrates the ride height of the Continental Air Suspension.
PROC_EAS_X_CALIBRATE-RIDE-HEIGHT