Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
Model 3, Y, S & X
421 tasks Showing 361–384
Clear filtersThe dual bootstrap eSim procedure swaps the eSim operator from AT&T to KPN and vice-versa. For the procedure to execute properly, the 'kpn' input must be set to 'true' to switch to KPN and 'false' to switch to AT&T.
PROC_ICE_X_DUAL-BOOTSTRAP-E-SIM
The procedure assists the inflation of a component on a Tesla Air Suspension (TAS) vehicle.
PROC_TAS_X_ASSISTED-INFLATE
Tests communication with the Air Suspension Chassis (TAS) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_TAS
The procedure clears crash detection alerts in the Tesla Air Suspension (TAS) ECU.
PROC_TAS_X_CLEAR-CRASH-DETECTED
The procedure clears spring leakage alerts in the Tesla Air Suspension (TAS) ECU.
PROC_TAS_X_CLEAR-SPRING-LEAK-ALERT
Deflates a component on the Tesla Air Suspension (TAS) system. Tesla Air Suspension (TAS) Electronic Control Unit (ECU) must be in Service Mode to run the procedure.
PROC_TAS_X_DEFLATE
Levels the Tesla Air Suspension (TAS) to the selected target height.
PROC_TAS_X_LEVEL-TO-HEIGHT
Tesla Air Suspension (TAS) Electronic Control Unit (ECU) enters normal mode.
PROC_TAS_X_ENTER-NORMAL-MODE
Calibrates the ride height of the Tesla Air Suspension (TAS).
PROC_TAS_X_CALIBRATE-RIDE-HEIGHT
Checks the ride height calibration of the Tesla Air Suspension (TAS).
PROC_TAS_X_CHECK-RIDE-HEIGHT-CALIBRATION
Tesla Air Suspension (TAS) Electronic Control Unit (ECU) enters Service Mode.
PROC_TAS_X_ENTER-SERVICE-MODE
The update to vehicle firmware is terminated.
UPDATE_SERVICE-TERMINATE
Check Tesla Air Suspension (TAS) airline connections. TAS must be in Service Mode (PROC_TAS_X_ENTER-SERVICE-MODE) and be set to Medium ride height (PROC_TAS_X_LEVEL-TO-HEIGHT) before running this routine.
PROC_TAS_X_AIRLINE-TEST
Tests the electrical connection between the air suspension compressor, the boost valve, the exhaust valve, and the compressor ground return connection.
TEST-SELF_TAS_X_COMPRESSOR-VALVE
Tests the electrical connection of the air suspension valve block reservoir valve, corner valves, and pressure sensor.
TEST-SELF_TAS_X_VALVE-BLOCK
Tests whether the Access Point Name (APN), SIM card, and International Mobile Equipment Identity (IMEI) reported by the Infotainment system match Tesla servers.
TEST_ICE_X_SIM-APN
Tests the functionality and quality of DAB radio. Verifies that the DAB radio hardware and software can tune to a specific station and output audio.
TEST_ICE_X_RADIO-DAB-QUALITY
Verify the connectivity status of the vehicle's WiFi antenna.
TEST_CID_X_WIFI-ANTENNA
A all-in-one test for the exterior lights on the Model X. During the test, all front or rear exterior lights will illuminate for 5 seconds and the front or rear body controller will look for any errors. Pass or fail results will be returned for every light. Note: the park lights (hockey sticks) and turn signals will turn on at the same time and the color will be peach (mix of orange and white). This is expected.
PROC_BCFRONT_FRONT_TEST-FRONT-LIGHTS
A all-in-one test for the exterior lights on the Model X. During the test, all of the front exterior lights will illuminate for 5 seconds and the front body controller will look for any errors. Pass or fail results will be returned for every light. Note: the front park lights (hockey sticks) and turn signals will turn on at the same time and the color will be peach (mix of orange and white). This is expected.
PROC_BCREAR_REAR_TEST-REAR-LIGHTS
Tests communication with the Thermal Controller for Supercharger (THC) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_THC
Starts or stops the coolant and/or refrigerant fluid fill and drain routine. 'Start' will set the coolant valve to Series mode with the radiator 50% bypassed, chiller valve 50% bypassed, and all coolant pumps off. This routine fully opens the chiller evaporator expansion valve and chiller solenoid (if equipped). It also disables the refrigerant compressor. This routine fails if another routine is already running on the Thermal Controller or if the vehicle is charging or in Drive. 'Stop' will cancel the fluid fill and drain routine and restore normal operation. Stopping this routine will fail if it is already stopped.
PROC_THC_X_FLUID-FILL-DRAIN
Runs the thermal system test for approximately five minutes and returns results. Results can be retrieved at a later time using PROC_THC_X_THERMAL-TEST-RESULT.
PROC_THC_X_THERMAL-TEST
Request thermal test result
PROC_THC_X_THERMAL-TEST-RESULT