Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
Model 3, Y, S & X
857 tasks Showing 745–768
Clear filtersRuns the sv command on the car computer to control and see the current status of infotainment processes.
PROC_ICE_X_SV-COMMAND
The update to vehicle firmware is terminated.
UPDATE_SERVICE-TERMINATE
Checks the microphone functionality.
TEST_DIGITAL-MICS_X_FUNCTIONAL-CHECK
Tests the Gateway's ability to confine faults and monitor controller area network (CAN) bus activity.
TEST-CAN_GTW
Test horn button press
TEST-SELF_HORN_X_BUTTON-PRESS
Radio Tuner connection test for all variants
TEST-SELF_RADIOTUNER-ALL
Tests if the Front Controllers is able to turn on its Drive inverter front efuse successfully.
PROC_VCFRONT2_DIF-EFUSE-TURN-ON-TEST
Starts the Thermal Coolant Flow Cycle with all coolant modes. The routine will run for up to 20 minutes.
PROC_VCFRONT2_X_THERMAL-COOLANT-FLOW-CYCLE
Starts the Thermal Coolant Flow Cycle with all coolant modes. The routine will run for up to 20 minutes.
PROC_VCFRONT_X_THERMAL-COOLANT-FLOW-CYCLE
HEATPUMP ONLY: Starts the Thermal Coolant Flow Cycle with only ambient source mode. The routine will run for up to 5 minutes
PROC_VCFRONT2_X_THERMAL-COOLANT-FLOW-CYCLE-AMBIENT-SOURCE
HEATPUMP ONLY: Starts the Thermal Coolant Flow Cycle with only ambient source mode. The routine will run for up to 5 minutes
PROC_VCFRONT_X_THERMAL-COOLANT-FLOW-CYCLE-AMBIENT-SOURCE
PRE-HEATPUMP ONLY: Starts the Thermal Coolant Flow Cycle with only parallel bypass mode. The routine will run for up to 5 minutes
PROC_VCFRONT_X_THERMAL-COOLANT-FLOW-CYCLE-PARALLEL-BYPASS
Starts the Thermal Coolant Flow Cycle with only parallel mode. The routine will run for up to 5 minutes
PROC_VCFRONT2_X_THERMAL-COOLANT-FLOW-CYCLE-PARALLEL-NO-BYPASS
Starts the Thermal Coolant Flow Cycle with only parallel mode. The routine will run for up to 5 minutes
PROC_VCFRONT_X_THERMAL-COOLANT-FLOW-CYCLE-PARALLEL-NO-BYPASS
Starts the Thermal Coolant Flow Cycle with only series bypass mode. The routine will run for up to 5 minutes
PROC_VCFRONT2_X_THERMAL-COOLANT-FLOW-CYCLE-SERIES-BYPASS
Starts the Thermal Coolant Flow Cycle with only series bypass mode. The routine will run for up to 5 minutes
PROC_VCFRONT_X_THERMAL-COOLANT-FLOW-CYCLE-SERIES-BYPASS
Starts the Thermal Coolant Flow Cycle with only series mode. The routine will run for up to 5 minutes
PROC_VCFRONT2_X_THERMAL-COOLANT-FLOW-CYCLE-SERIES-NO-BYPASS
Starts the Thermal Coolant Flow Cycle with only series mode. The routine will run for up to 5 minutes
PROC_VCFRONT_X_THERMAL-COOLANT-FLOW-CYCLE-SERIES-NO-BYPASS
Places the coolant valve in series mode and turns the coolant pumps off for draining or filling coolant. In addition, this routine opens the Electronic Expansion Valves (EXVs) for recovering or charging refrigerant.
PROC_VCFRONT_X_THERMAL-FILL-DRAIN
Tests the vehicle thermal system performance, including both powertrain and cabin HVAC heating and cooling with pass or fail result returned. This is the same routine used by Tesla in the manufacturing environment to certify thermal system is performing to specification.
TEST-SELF_VCFRONT2_X_THERMAL-PERFORMANCE
Tests the performance of the vehicle thermal system, the powertrain, and the HVAC heating and cooling. The resulting output is either a pass or fail. Tesla manufacturing uses this routine to certify the thermal system's performance.
TEST-SELF_VCFRONT_X_THERMAL-PERFORMANCE
Attempts to moves the third row seat recliner according to the provided command.
PROC_VC_X_3R-SEAT-RECLINE-COMMAND-MOVEMENT
Attempts to moves the second row seat recliner/backrest rearward, fold the seat, then unfold the seat to the nominal position.
PROC_VC_X_3R-SEAT-RECLINE-FUNCTIONAL-TEST
Tests the power, connection, and communication of the Temperature, Humidity, and Sunlight (THS) sensor.
TEST-SELF_VCRIGHT_X_THS