User interface alerts

UI alert codes

Showing 51–100 of 258

• UI_a052 — Kernel Panic Reported UI_a052_KernelPanicReported The operating system encounters an error, preventing the system from running as expected and causing the UI to reboot.
• UI_a053 — QtCar Exit Error UI_a053_QtCarExitError The User Interface (UI) main application, also known as QtCar, has encountered an unexpected or unrecoverable error causing it to reboot.
• UI_a054 — Audio Boost Power Bad UI_a054_AudioBoostPowerBad The external amplifier's boost power has detected an issue during initialization.
• UI_a055 — Manual eCall Disabled UI_a055_ManualECallDisabled The manual Ecall SOS button (located on the Front Overhead Console) has been disabled because a fault condition was detected
• UI_a056 — Manual eCall Button Disconnected UI_a056_ManualECallButtonDisconnected The manual Ecall SOS button (located on the Front Overhead Console) is disconnected
• UI_a057 — Cell Antenna Disconnected UI_a057_CellAntennaDisconnected Ecall backup antenna is disconnected
• UI_a058 — GPS Antenna Disconnected UI_a058_GPSAntennaDisconnected Ecall alert. Based on driver assistance selftest result, modem signals that GPS antena is disconnected. Check coax cable and connectors between the GPS antenna and driver assistance ecu and also the ethernet connection between the driver a…
• UI_a059 — eCall Speaker Disconnected UI_a059_ECallSpeakerDisconnected Ecall speaker is disconnected
• UI_a060 — eCall Mic Disconnected UI_a060_ECallMicDisconnected Ecall microphone is disconnected
• UI_a061 — SIM Test Failed UI_a061_SIMTestFailed Ecall alert. Modem reports that SIM card is not present
• UI_a062 — ENS Test Failed UI_a062_ENSTestFailed Ecall alert. Test of the air bag ENS (emergency notification signal) failed
• UI_a063 — Cellular Test Failed UI_a063_CellularTestFailed Ecall alert. Modem cellular test was failed
• UI_a064 — Modem Firmware Test Failed UI_a064_ModemFirmwareTestFailed Ecall alert. Modem firmware does not boot properly. Firmware image maybe corrupted
• UI_a065 — WiFi Recovery Reset UI_a065_WiFiRecoveryReset The connection manager detected a condition requiring the Wi-Fi link to be reset, which may lead to a loss of Wi-Fi connectivity.
• UI_a066 — Gpu Hang Detected UI_a066_GpuHangDetected The User Interface (UI) Electronic Control Unit (ECU) detects the Graphical Processing Unit (GPU) experiences a software error known as a GPU hang.
• UI_a067 — Warn On I915 UI_a067_WarnOnI915 The Driver Assistance Electronic Control Unit (ECU) has detected an issue with the Graphics Processing Unit (GPU) driver. A message containing 'WARN_ON(i915)' may be present in the logs.
• UI_a068 — Video Unexpected Exit UI_a068_VideoUnexpectedExit Video process quit unexpectedly.
• UI_a069 — Video UDP Timeout UI_a069_VideoUDPTimeout The video process for the backup camera is not receiving the user datagram protocol (UDP) packets within the required time frame, which may lead to the camera video stream being unavailable.
• UI_a070 — Video Pipeline Warning UI_a070_VideoPipelineWarning The Media Control Unit (MCU) has detected a warning from the video pipeline. A video pipeline warning was posted on the Controller Area Network (CAN) bus.
• UI_a071 — Video Pipeline Error UI_a071_VideoPipelineError The Media Control Unit (MCU) has detected an error from the video pipeline. A video pipeline error was posted on the Controller Area Network (CAN) bus.
• UI_a072 — eCall Analog Mic Failed UI_a072_ECallAnalogMicFailed The Ecall audio configurator 'Ecall Analog microphone' test failed
• UI_a073 — eCall Digital Mic Failed UI_a073_ECallDigitalMicFailed The Ecall audio configurator 'Ecall Digital microphone' test failed
• UI_a074 — eMMC Hang Detected UI_a074_EMMCHangDetected eMMC hanged and was not able to be read or written to.
• UI_a075 — Backup Camera Init Error UI_a075_BackupCameraInitError Backup camera initialization failed.
• UI_a076 — Num False Manual eCalls UI_a076_NumFalseManualECalls An eCall has been cancelled manually with no passengers present and all doors closed.
• UI_a077 — Audio A2b Mic Channel Swap UI_a077_AudioA2bMicChannelSwap The A2B microphone channels are in a swapped state
• UI_a078 — Dashcam Usb Drive Unmountable UI_a078_DashcamUsbDriveUnmountable The USB drive used for dashcam has failed to mount.
• UI_a079 — Dashcam Usb Drive Full UI_a079_DashcamUsbDriveFull The USB drive used for dashcam does not have enough free space.
• UI_a080 — Dashcam Usb Drive Slow UI_a080_DashcamUsbDriveSlow The Dashcam and Sentry Mode USB drive does not write fast enough for Dashcam operation, which may prevent Dashcam and Sentry Mode from saving videos.
• UI_a081 — Cell Modem Search Expired UI_a081_CellModemSearchExpired The modem cellular connection search timer has expired, which may lead to a loss of cellular connectivity.
• UI_a082 — Num Modem Reboot Stuck In eCall UI_a082_NumModemRebootStuckInECall The cellular modem has been rebooted due to an active eCall lasting longer than 1,800 seconds, the backstop timer value.
• UI_a083 — eCall Proxy Watchdog Triggered UI_a083_ECallProxyWatchdogTriggered The EcallProxy watchdog was triggered due to hanging EcallProxy
• UI_a084 — Serializer Error UI_a084_SerializerError Display status check failed due to datastream serialization error.
• UI_a085 — Deserializer Error UI_a085_DeserializerError The car computer is unable to recieve the deserialization chip ID over the I2C bus, which may lead to the touchscreen being blank, unresponsive, or have limited functionality.
• UI_a086 — Touch Enumeration Error UI_a086_TouchEnumerationError Display status check failed due to touch device missing.
• UI_a087 — Bmp Reset UI_a087_BmpReset ABL Boot Type of BMP Reset
• UI_a088 — Cell Removable Sim Missing UI_a088_CellRemovableSimMissing The SIM card type is set to Removable, is missing, or is not fully seated, which may lead to a loss of cellular connectivity.
• UI_a089 — Radio Reset UI_a089_RadioReset The radio server has been restarted.
• UI_a090 — Radio Ping Fail Error UI_a090_RadioPingFailError The vehicle gateway (GTW) cannot ping the radio tuner after at least 3 attempts to connect.
• UI_a091 — Vehicle Link Stall UI_a091_VehicleLinkStall The QtCarVehicle link is stalled, preventing communication between the Center Instrument Display (CID) or User Interface (UI) and the vehicle Gateway (GTW).
• UI_a092 — Update Started UI_a092_updateStarted A software update has started.
• UI_a093 — Update Ended UI_a093_updateEnded A software update has ended.
• UI_a094 — Modem Power On Failure UI_a094_ModemPowerOnFailure Modem failing to power ON
• UI_a095 — Cid Storage Running Low UI_a095_CidStorageRunningLow Low Disk Space
• UI_a096 — Videod Pipeline Issue Detected UI_a096_VideodPipelineIssueDetected A condition is detected with the video stream(s) coming from the camera(s).
• UI_a097 — Audiod Restarted UI_a097_AudiodRestarted The main audio process (Audiod) Input / Output (IO) thread is being prevented from executing, or blocked. Audiod has restarted due to Advanced Linux Sound Architecture (ALSA) IO function taking longer than 10 seconds.
• UI_a098 — Disk Check Failure UI_a098_DiskCheckFailure Post-wake disk check failure
• UI_a099 — eMMC Status Error UI_a099_eMMCStatusError eMMC Status Register has error bits set
• UI_a100 — eMMC FTL Error UI_a100_eMMCFTLError eMMC FTL Register has been set
• UI_a101 — WiFi Stack Problem UI_a101_wifiStackProblem A Wi-Fi stack condition is detected, which may lead to a loss of Wi-Fi connectivity.