Right electronic parking brake alerts

EPBR alert codes

Showing 101–150 of 169

• EPBR_a177 — Csm Apply Retry EPBR_a177_csmApplyRetry Electronic Parking Brake apply was interrupted. Apply will be retried.
• EPBR_a178 — Caliper State Unknown EPBR_a178_caliperStateUnknown Electronic Parking Brake was not able to determine caliper state on boot.
• EPBR_a179 — Epb Problem EPBR_a179_epbProblem Customer facing alert for Electronic Parking Brake issues which occur when caliper is not moving
• EPBR_a180 — Dynamic Active EPBR_a180_dynamicActive Customer facing alert issued when Electronic Parking Brake is applied at higher than 5mph
• EPBR_a181 — Too Steep Grade To Park EPBR_a181_TooSteepGradeToPark Road grade is too steep to secure with Park Brake
• EPBR_a182 — One EPB Applied Unsec Env EPBR_a182_OneEPBAppliedUnsecEnv One Electronic Parking Brake (EPB) not applied, and road grade is too steep to secure vehicle with only one EPB
• EPBR_a183 — Cdp Not Available EPBR_a183_cdpNotAvailable Stability Control reports Controlled Deceleration for Parking Brake is not available when car is in DRIVE
• EPBR_a184 — Dynamic Park Abort EPBR_a184_dynamicParkAbort Non-nominal termination of dynamic park
• EPBR_a185 — Summon Aborted EPBR_a185_summonAborted
• EPBR_a186 — External Park Abort EPBR_a186_externalParkAbort Non-nominal termination of external park
• EPBR_a187 — Cdp Dynamic EPBR_a187_cdpDynamic Stability Control has begun Controlled Deceleration for Parking Brake
• EPBR_a188 — Epb Dynamic EPBR_a188_epbDynamic Electronic Parking Brake is performing dynamic apply
• EPBR_a189 — Epb Dynamic Park Canceled EPBR_a189_epbDynamicParkCanceled Electronic Parking Brake was attempting to dynamic park, Controlled Deceleration for Parking Brake is unavailable, and speed crossed above 8.8kph
• EPBR_a190 — Csm Apply Degraded EPBR_a190_csmApplyDegraded Electronic Parking Brake apply failed.
• EPBR_a191 — Csm Release Degraded EPBR_a191_csmReleaseDegraded Electronic Parking Brake was unable to release fully.
• EPBR_a195 — Park For Driver Is Leaving EPBR_a195_parkForDriverIsLeaving The Electronic Parking Brake (EPB) reports the driver is leaving and parks the vehicle.
• EPBR_a196 — Free Roll Mode Active EPBR_a196_freeRollModeActive will prevent EPB from parking when the driver leaves
• EPBR_a197 — Free Roll Mode At Speed EPBR_a197_freeRollModeAtSpeed If vehicle reaches 8.8kph, EPB will park
• EPBR_a198 — Hold Clamp Complete EPBR_a198_holdClampComplete EPB hold clamp finished, log I, V, and calculated R
• EPBR_a200 — Pm Unpark Not Allowed EPBR_a200_PmUnparkNotAllowed DI requested unpark but PM didn't allow it
• EPBR_a202 — Remote Epb Config Incompatible EPBR_a202_remoteEpbConfigIncompatible EPB's brake HW config is not compatible remote EPB's brake HW config
• EPBR_a203 — Hw Brake Type Mismatch EPBR_a203_hwBrakeTypeMismatch Electronic Parking Brake's learned configuration does not match the reported config from the gateway
• EPBR_a210 — Park For Driver Is Leaving Debug EPBR_a210_parkForDriverIsLeavingDebug The Electronic Parking Brake (EPB) reports the driver is leaving and parks the vehicle.
• EPBR_a216 — SPI MIA debug Data1 EPBR_a216_SPI_MIA_debugData1 The communication link between Electronic Parking Brake and Electronic Parking Brake Monitor has encountered an error.
• EPBR_a217 — SPI MIA debug Data2 EPBR_a217_SPI_MIA_debugData2 The communication link between Electronic Parking Brake and Electronic Parking Brake Monitor has encountered an error.
• EPBR_a225 — Epb Active Decel EPBR_a225_epbActiveDecel Stability Control has begun Controlled Deceleration for Parking Brake
• EPBR_a241 — Di Output Locked EPBR_a241_diOutputLocked A request to change the DI power state has been denied.
• EPBR_a242 — Hv Output Locked EPBR_a242_hvOutputLocked A request to change the HVC or Contactor power state has been denied.
• EPBR_a243 — Bdw Unavailable EPBR_a243_bdwUnavailable Brake Disc Wipe algorithm is not running due to loss of input signal(s)
• EPBR_a244 — Winch Mode Active EPBR_a244_WinchModeActive Non user facing alert set for service set when winch mode is active
• EPBR_a245 — Service Mode Active EPBR_a245_serviceModeActive User facing to warn that Electronic Parking Brake is in service mode and many Electronic Parking Brake features are disabled
• EPBR_a246 — Idle Fault Apply EPBR_a246_idleFaultApply Electronic Parking Brake apply failed due to idle fault
• EPBR_a247 — Csm Dynamic Apply Retry EPBR_a247_csmDynamicApplyRetry Electronic Parking Brake apply was interrupted during dynamic apply. Apply will be retried.
• EPBR_a248 — Csm Dynamic Apply Failed EPBR_a248_csmDynamicApplyFailed Electronic Parking Brake apply was interrupted during dynamic apply. Apply failed.
• EPBR_a249 — Idle Fault Release EPBR_a249_idleFaultRelease Electronic Parking Brake release failed due to idle fault
• EPBR_a250 — Winch Mode Canceled EPBR_a250_WinchModeCanceled Electronic Parking Brake has detected a vehicle speed condition that caused it to exit winch mode.
• EPBR_a251 — Current Variance High EPBR_a251_currentVarianceHigh Electronic Parking Brake noticed very noisy current
• EPBR_a252 — Winch Mode Pending EPBR_a252_winchModePending Electronic Parking Brake is preparing to enter winch mode
• EPBR_a253 — Esm Release Blocked EPBR_a253_esmReleaseBlocked Electronic Parking Brake is preventing calipers from opening
• EPBR_a254 — Show Stalk Park Button Fault On Ui EPBR_a254_showStalkParkButtonFaultOnUi Electronic Parking Brake has determined that the drive stalk park button has faulted and UI alert should be set allowing driver to park through UI
• EPBR_a256 — Epb System Apply EPBR_a256_epbSystemApply EPB parked the vehicle for a system reason
• EPBR_a261 — Winch Mode Without Steering EPBR_a261_winchModeWithoutSteering The Electronic Parking Brake (EPB) enabled Winch Mode but did not receive the expected messages from the steering system.
• EPBR_a262 — Cannot Prepare Winch Mode EPBR_a262_cannotPrepareWinchMode Non user facing alert set when user attempts to enter winch mode but a system reason prevents EPB from activating winch mode
• EPBR_a263 — Epb Recovery Park EPBR_a263_epbRecoveryPark The Electronic Parking Brake (EPB) attempted to park to establish vehicle security for Low Voltage system recovery.
• EPBR_a264 — Winch Mode Deactivated EPBR_a264_winchModeDeactivated Non user facing alert set when winch mode deactivates
• EPBR_a272 — Vhcl Pwr State Msmtch EPBR_a272_vhclPwrStateMsmtch Vehicle attempted a power state transition which the Electronic Parking Brake did not agree with.
• EPBR_a300 — Left Right Confusion EPBR_a300_leftRightConfusion Electronic Parking Brake not sure if it is a left or a right.
• EPBR_a301 — Ooc Speed Violation EPBR_a301_oocSpeedViolation Vehicle speed is limited based on ultrasonic distance measurements. Currently in ghosted alert.
• EPBR_a302 — Csm Long Release EPBR_a302_csmLongRelease EPB releases no-load is measured using derivative of current. Currently in ghosted alert.
• EPBR_a303 — Clamping Occured Early EPBR_a303_clampingOccuredEarly When EPB was applying the current measured went above the max no load current before piston position estimate predicted it would.