PM_a044 — Ebr Intervention

Full alert identifier: PM_a044_ebrIntervention

Alert description

Pedal Monitor Warning: External Brake Torque Command is Invalid.

The safety monitor will disable external braking request (EBR) for the remainder of the drive cycle.

The safety monitor sets this condition when sensor or other ECU inputs into EBR functionality are deemed implausible.

This alert will clear on the next drive cycle.

Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.

Signal	Unit
Di Brake Torque Command `PM_a044_diBrakeTorqueCommand`	Nm
Pm Bfill Torque Allowed `PM_a044_pmBfillTorqueAllowed`	Nm

Signal	Unit
Di Aeb State `PM_a044_diAebState` 0 UNAVAILABLE 1 STANDBY 2 ENABLED 3 STANDSTILL 4 FAULT 5 UNAVAILABLE ALERT 7 SNA	—
Di Cruise State `PM_a044_diCruiseState` 0 UNAVAILABLE 1 STANDBY 2 ENABLED 3 STANDSTILL 4 OVERRIDE 5 FAULT 6 PRE FAULT 7 PRE CANCEL	—
Di Vehicle Hold State `PM_a044_diVehicleHoldState` 0 UNAVAILABLE 1 STANDBY 2 BLEND IN 3 STANDSTILL 4 BLEND OUT 5 PARK 6 FAULT 7 INIT	—
Pm Aeb State `PM_a044_pmAebState` 0 UNAVAILABLE 1 STANDBY 2 ENABLED 3 STANDSTILL 4 FAULT 5 UNAVAILABLE ALERT 7 SNA	—
Pm Cruise State `PM_a044_pmCruiseState` 0 UNAVAILABLE 1 STANDBY 2 ENABLED 3 STANDSTILL 4 OVERRIDE 5 FAULT 6 PRE FAULT 7 PRE CANCEL	—
Pm Vehicle Hold State `PM_a044_pmVehicleHoldState` 0 UNAVAILABLE 1 STANDBY 2 BLEND IN 3 STANDSTILL 4 BLEND OUT 5 PARK 6 FAULT 7 INIT	—
Regen Backfill Pm State `PM_a044_regenBackfillPmState` 0 UNAVAILABLE 1 STANDBY 2 ACTIVE	—

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of PM_a044.