DIREL_a001 — Hw Phase Agate Drive

Full alert identifier: DIREL_a001_hwPhaseAgateDrive

Alert description

The Drive Inverter (DIx) has detected a condition affecting functionality at the gate driver on Phase A.

Potential impact

DIx may be inoperable.

Set condition

DIx has detected a condition affecting functionality at the gate driver on Phase A. View payload signal to confirm reason for alert.

Clear condition

DIx no longer detects a condition affecting functionality at the gate driver on Phase A.

Signals to check

These diagnostic fields are associated with DIREL_a001. Check the alert's Payload in Service Mode Plus for available values.

Signal	Unit
Asynch Stop H `DIREL_a001_asynchStop_H`	—
Asynch Stop L `DIREL_a001_asynchStop_L`	—
Deadtime Error H `DIREL_a001_deadtimeError_H`	—
Deadtime Error L `DIREL_a001_deadtimeError_L`	—
Desat H `DIREL_a001_desat_H`	—
Desat L `DIREL_a001_desat_L`	—
Fault Line 1 Gpio H `DIREL_a001_faultLine1Gpio_H`	—
Fault Line 1 Gpio L `DIREL_a001_faultLine1Gpio_L`	—

Show 35 more fields

Signal	Unit
Gate Drive Err Counter `DIREL_a001_gateDriveErrCounter`	—
Local Comm Error H `DIREL_a001_localCommError_H`	—
Local Comm Error L `DIREL_a001_localCommError_L`	—
Local Reg Error H `DIREL_a001_localRegError_H`	—
Local Reg Error L `DIREL_a001_localRegError_L`	—
Local Reset H `DIREL_a001_localReset_H`	—
Local Reset L `DIREL_a001_localReset_L`	—
Overvolt VDD H `DIREL_a001_overvoltVDD_H`	—
Overvolt VDD L `DIREL_a001_overvoltVDD_L`	—
Overvolt VH H `DIREL_a001_overvoltVH_H`	—
Overvolt VH L `DIREL_a001_overvoltVH_L`	—
Overvolt VL H `DIREL_a001_overvoltVL_H`	—
Overvolt VL L `DIREL_a001_overvoltVL_L`	—
Remote Comm Error H `DIREL_a001_remoteCommError_H`	—
Remote Comm Error L `DIREL_a001_remoteCommError_L`	—
Remote Reg Error H `DIREL_a001_remoteRegError_H`	—
Remote Reg Error L `DIREL_a001_remoteRegError_L`	—
Remote Reset H `DIREL_a001_remoteReset_H`	—
Remote Reset L `DIREL_a001_remoteReset_L`	—
Sense H `DIREL_a001_sense_H`	—
Sense L `DIREL_a001_sense_L`	—
Spi Error H `DIREL_a001_spiError_H`	—
Spi Error L `DIREL_a001_spiError_L`	—
Thermal Shutdown H `DIREL_a001_thermalShutdown_H`	—
Thermal Shutdown L `DIREL_a001_thermalShutdown_L`	—
Thermal Warning H `DIREL_a001_thermalWarning_H`	—
Thermal Warning L `DIREL_a001_thermalWarning_L`	—
Undervolt VCC H `DIREL_a001_undervoltVCC_H`	—
Undervolt VCC L `DIREL_a001_undervoltVCC_L`	—
Undervolt VDD H `DIREL_a001_undervoltVDD_H`	—
Undervolt VDD L `DIREL_a001_undervoltVDD_L`	—
Undervolt VH H `DIREL_a001_undervoltVH_H`	—
Undervolt VH L `DIREL_a001_undervoltVH_L`	—
Undervolt VL H `DIREL_a001_undervoltVL_H`	—
Undervolt VL L `DIREL_a001_undervoltVL_L`	—

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of DIREL_a001.