CP_a115 — Unexpected Tcan1145 State
Full alert identifier: CP_a115_unexpectedTcan1145State
Alert description
The charge port (CP) detects that its CAN transceiver is in silent mode, preventing CAN traffic from passing through.
Potential impact
This information is not available in the alert reference.
Set condition
This information is not available in the alert reference.
Clear condition
This information is not available in the alert reference.
Signals to check
These diagnostic fields are associated with CP_a115. Check the alert's Payload in Service Mode Plus for available values.
| Signal | Unit |
|---|---|
Int Reg 1 Can Bus Inactive Asleep
CP_
|
— |
Int Reg 1 Can Bus Inactive Awake
CP_
|
— |
Int Reg 1 Can Bus Stuck Dominant
CP_
|
— |
Int Reg 1 Frame Overflow
CP_
|
— |
Int Reg 1 Local Wake Up
CP_
|
— |
Int Reg 1 Wake Error
CP_
|
— |
Int Reg 1 Wakeup Event
CP_
|
— |
Int Reg 1 Watchdog Trip
CP_
|
— |
Show 12 more fields
| Signal | Unit |
|---|---|
Int Reg 2 Power On Event
CP_
|
— |
Int Reg 2 Sleep Mode Status Flag
CP_
|
— |
Int Reg 2 Thermal Shutdown
CP_
|
— |
Int Reg 2 Thermal Shutdown Warning
CP_
|
— |
Int Reg 2 Vcc Under Voltage
CP_
|
— |
Int Reg 2 Vio Under Voltage
CP_
|
— |
Int Reg 2 Vsup Under Voltage
CP_
|
— |
Int Reg 3 Crc Eeprom Error
CP_
|
— |
Int Reg 3 Fail Safe Mode Entered
CP_
|
— |
Int Reg 3 Spi Error
CP_
|
— |
Int Reg 3 Sw Error
CP_
|
— |
Previous Transceiver State
CP_
|
— |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of CP_a115.