Primary autopilot processor alerts
Browse 291 APP alert codes and open an entry for its description and recorded conditions.
APP alert codes
Showing 151–200 of 291
- APP_w204 — Apc Final Front APP_w204_apcFinalFront This alert is primarily for informational purposes and reports the front measurements when Autopark has been completed or has aborted.
- APP_w205 — Apc Final Rear APP_w205_apcFinalRear This alert is primarily for informational purposes and reports the rear measurements when Autopark has been completed or has aborted.
- APP_w206 — Autosteer Not Enabled APP_w206_autosteerNotEnabled The driver tries to engage Autosteer when it is not available / enabled in the User Interface (UI).
- APP_w207 — Autosteer Unavailable APP_w207_autosteerUnavailable An attempt is made to engage Autosteer, but Autosteer is not available. Autosteer will not be activated.
- APP_w208 — Rack Detected APP_w208_rackDetected
- APP_w209 — Auto Summon Request APP_w209_autoSummonRequest
- APP_w210 — Cam Obstrcted APP_w210_camObstrcted One or more of the forward-facing cameras (main, narrow, and fisheye cameras) is obstructed. A camera may be blocked by debris, frost, or condensation.
- APP_w211 — Acc No Seat Belt APP_w211_accNoSeatBelt While Traffic-Aware Cruise Control (TACC) is active, the driver unbuckles their seat belt, which causes Autopilot to slow down the vehicle.
- APP_w212 — Lc Unavailable Strike Out APP_w212_lcUnavailableStrikeOut The Autopilot Automatic Lane Change (ALC) feature is disabled for the rest of the drive because the driver's hands were not detected on the steering wheel / yoke after 3 audible reminders. To re-enable ALC, the driver must put the vehicle…
- APP_w213 — Autosteer Struck Out APP_w213_autosteerStruckOut The Autopilot electronic control unit (ECU) detects that the driver's hands are not on the steering wheel after three consecutive reminders. Autopilot is not available for the remainder of the drive.
- APP_w214 — Driver Not Intracting APP_w214_driverNotIntracting
- APP_w215 — Cont Driver Not Intracting APP_w215_contDriverNotIntracting
- APP_w216 — Driver Overriding APP_w216_driverOverriding The driver overrides the Traffic-Aware Cruise Control (TACC) feature by using the accelerator pedal. This results in Autopilot not applying the brakes, favoring the driver's input instead.
- APP_w217 — Lc Unavailable Speeding APP_w217_lcUnavailableSpeeding Lateral Control (LC) is unavailable due to the vehicle being driven over 95mph (160kmph). This alert is not applicable to vehicles driving in Germany.
- APP_w218 — Lc Speed Exceeded Limit APP_w218_lcSpeedExceededLimit The driver attempts to activate Autosteer, but it is unavailable for the rest of the drive due to the vehicle being driven over 85mph (140kph). This alert is not applicable to vehicles driving in Germany.
- APP_w219 — Lc Temp Unavailable Speed APP_w219_lcTempUnavailableSpeed The driver attempts to activate Autosteer, but it is temporarily unavailable due to vehicle being driven over 95mph (160kmph). This alert is not applicable to vehicles driving in Germany.
- APP_w220 — Lc Temp Unavailable Road APP_w220_lcTempUnavailableRoad
- APP_w221 — Acc Radar Blind APP_w221_accRadarBlind The radar sensor has inadequate visibility and is blind or blocked, which may cause Traffic-Aware Cruise Control (TACC) functionality to be limited or unavailable.
- APP_w222 — Acc Camera Blind APP_w222_accCameraBlind One or more cameras has inadequate visibility and is blind or blocked, which may cause Traffic-Aware Cruise Control (TACC) functionality to be limited or unavailable.
- APP_w223 — Acc Object In Path APP_w223_accObjectInPath The Autopilot electronic control unit (ECU) has detected an object in the vehicle's path, temporarily making the Traffic-Aware Cruise Control (TACC) feature unavailable.
- APP_w224 — Acc Camera Calibration APP_w224_accCameraCalibration One or more of the main and/or narrow cameras is not calibrated, which may cause Traffic-Aware Cruise Control (TACC) functionality to be limited or unavailable.
- APP_w225 — Lc Degraded Vis Speed Lmt APP_w225_lcDegradedVisSpeedLmt One or more of the main and/or narrow camera pitches is out of bounds, which may cause Traffic-Aware Cruise Control (TACC) functionality to be limited or unavailable.
- APP_w226 — Lc Cam Cal Needed Speed Lmt APP_w226_lcCamCalNeededSpeedLmt
- APP_w227 — Virtual Wall Blocked APP_w227_virtualWallBlocked
- APP_w229 — Alc Ultrasound Damaged APP_w229_alcUltrasoundDamaged Automatic lane change (ALC) is initiated by the driver but ALC is unavailable due to Autopilot electronic control unit (ECU) detecting damage to ultrasonic sensors.
- APP_w230 — Alc Ultrasound Blocked APP_w230_alcUltrasoundBlocked Automatic lane change (ALC) is unavailable due to Autopilot electronic control unit (ECU) detecting blocked ultrasonic sensors.
- APP_w231 — Idf Event APP_w231_idfEvent
- APP_w232 — Lane Change Requested APP_w232_laneChangeRequested
- APP_w233 — Lane Change Cancelled APP_w233_laneChangeCancelled
- APP_w234 — Active Safety Telemetry APP_w234_activeSafetyTelemetry
- APP_w257 — Brake Jerk Event APP_w257_brakeJerkEvent
- APP_w258 — Aeb Event APP_w258_aebEvent
- APP_w259 — Aeb Override Event APP_w259_aebOverrideEvent
- APP_w260 — Collision Warning Event APP_w260_collisionWarningEvent The Autopilot electronic control unit (ECU) has detected that a potential collision is about to occur and has logged a Forward Collision Warning (FCW) or Brake Capacity Warning (BCW) event.
- APP_w261 — PCIe Hardware Errors APP_w261_pcieHardwareErrors The Autopilot electronic control unit (ECU) has detected internal hardware errors via the PCIe bus (Peripheral Component Interconnect Express bus).
- APP_w262 — Ape Calib Mode APP_w262_apeCalibMode The Autopilot electronic control unit (ECU) is in offline calibration mode, which may cause Autopilot functionality to be limited or unavailable.
- APP_w263 — Lss Abort APP_w263_lssAbort The Autopilot electronic control unit (ECU) has detected a condition on the vehicle that does not allow Lane Support Systems (LSS) features, like Lane Departure Avoidance (LDA) or Emergency Lane Departure Avoidance (ELDA), to operate.
- APP_w264 — Lss Fault APP_w264_lssFault Lane Support System (LSS) has encountered a condition making Lane Departure Warning and Emergency Lane Departure Warning features unavailable.
- APP_w265 — Drv On Nav Unavailable APP_w265_drvOnNavUnavailable The Autopilot electronic control unit (ECU) detects a condition that makes Navigate on Autopilot unavailable.
- APP_w266 — Vision Schedule Fallback APP_w266_visionScheduleFallback The Autopilot electronic control unit (ECU) has detected a reduction in vision or a potential blocking of the side cameras. Automatic lane changes and blind spot assist are unavailable.
- APP_w267 — Benchtop Ecu APP_w267_benchtopEcu
- APP_w268 — Backup Cam Ext Not Cal APP_w268_backupCamExtNotCal
- APP_w269 — Autopilot Limited APP_w269_autopilotLimited The Autopilot electronic control unit (ECU) has detected a condition on the vehicle which limits Autopilot feature availability.
- APP_w270 — Blindspot Restricted APP_w270_blindspotRestricted The Blind Spot Warning (BSW) functionality is limited or not available due to a condition affecting the cameras, ultrasonic sensors, and/or turn indicators.
- APP_w271 — Lane Change Aborted APP_w271_laneChangeAborted An automatic lane change has been aborted. This requires the driver to manually complete the maneuver.
- APP_w272 — Lane Change Unavailable APP_w272_laneChangeUnavailable The Autopilot electronic control unit (ECU) detects a situation in which a lane change is unavailable and prevents an automatic lane change from occurring.
- APP_w273 — Lss Event APP_w273_lssEvent A Lane Support Systems (LSS) feature, like Lane Departure Avoidance (LDA) or Emergency Lane Departure Avoidance (ELDA), was activated. This alert is for logging purposes only. The vehicle is operating as expected when the alert is present.
- APP_w274 — Main Camera Stream Err APP_w274_mainCameraStreamErr
- APP_w275 — Narrow Camera Stream Err APP_w275_narrowCameraStreamErr
- APP_w276 — Fisheye Camera Stream Err APP_w276_fisheyeCameraStreamErr