Left vehicle controller alerts

VCLEFT alert codes

Showing 301–350 of 475

• VCLEFT_a372 — Seat2 Row Backrest Unlatched VCLEFT_a372_seat2RowBackrestUnlatched The second row backrest sensor status does not indicate the seat is latched while an occupant is present and the vehicle is in Drive.
• VCLEFT_a373 — Window Sw Open Req In Dog Mode VCLEFT_a373_windowSwOpenReqInDogMode Window switch open requests are ignored when Dog Mode is active to prevent pet escape
• VCLEFT_a374 — Trailer Light Fault Model Y VCLEFT_a374_trailerLightFaultModelY One or more trailer lights are faulted
• VCLEFT_a375 — Window Pinch Override Nudge VCLEFT_a375_windowPinchOverrideNudge Two window pinch events occured within 30 seconds of each other
• VCLEFT_a376 — Seat2 Row Bridge Current Exceeded VCLEFT_a376_seat2RowBridgeCurrentExceeded Easy entry switch unavailable due to condition detected affecting second row easy entry actuator bridge functionality
• VCLEFT_a380 — Steer Col Thermal Limited VCLEFT_a380_steerColThermalLimited Steering column thermal protection mode is activated and user input was attempted, but blocked
• VCLEFT_a381 — Pitch Estimation1 VCLEFT_a381_pitchEstimation1 Pitch estimation, pitch measurement and contextual data for fleet analysis prior to changing pitch source for headlamp aiming
• VCLEFT_a382 — Pitch Estimation2 VCLEFT_a382_pitchEstimation2 Pitch estimation, pitch measurement and contextual data for fleet analysis prior to changing pitch source for headlamp aiming
• VCLEFT_a383 — Steer Col In Out Motor Stall Current VCLEFT_a383_steerColInOutMotorStallCurrent Steering column in/out motor is running at stall current
• VCLEFT_a384 — Steer Col Up Down Motor Stall Current VCLEFT_a384_steerColUpDownMotorStallCurrent Steering column up/down motor is running at stall current
• VCLEFT_a385 — Steer Col In Out Motor Under Current VCLEFT_a385_steerColInOutMotorUnderCurrent Steering column in/out motor current is too low while being driven
• VCLEFT_a386 — Steer Col Up Down Motor Under Current VCLEFT_a386_steerColUpDownMotorUnderCurrent Steering column up/down motor current is too low while being driven
• VCLEFT_a387 — Steer Col In Out Motor Encoder Stalled VCLEFT_a387_steerColInOutMotorEncoderStalled Steering column in/out motor encoder ticks not seen while being driven
• VCLEFT_a388 — Steer Col Up Down Motor Encoder Stalled VCLEFT_a388_steerColUpDownMotorEncoderStalled Steering column up/down motor encoder ticks not seen while being driven
• VCLEFT_a389 — Steer Col In Out Encoder Out Of Range VCLEFT_a389_steerColInOutEncoderOutOfRange Steering column in/out encoder out of range
• VCLEFT_a390 — Steer Col Up Down Encoder Out Of Range VCLEFT_a390_steerColUpDownEncoderOutOfRange Steering column up/down encoder out of range
• VCLEFT_a391 — Pitch Estimation Implausible VCLEFT_a391_pitchEstimationImplausible Insight on what aspect of pitch estimation was implausible
• VCLEFT_a392 — Pitch Estimation GPS Improved Reinit VCLEFT_a392_pitchEstimationGPSImprovedReinit Left vehicle controller (VCLEFT) detected that GPS accuracy improved significantly since beginning of fusion pitch estimation for headlight leveling.
• VCLEFT_a393 — Pitch Estimation No GPS Fusion VCLEFT_a393_pitchEstimationNoGPSFusion Left vehicle controller (VCLEFT) has not obtained a GPS fusion pitch estimate for headlight leveling despite the vehicle having traveled significant distance.
• VCLEFT_a394 — Sws Touch Too Negative Delta VCLEFT_a394_swsTouchTooNegativeDelta When the capacitive baseline creeps upwards, a sudden drop in the raw counts will cause a negative delta comparison between baseline & rawValue
• VCLEFT_a395 — Sws Touch Adc Check Fail VCLEFT_a395_swsTouchAdcCheckFail This ensures all the SWS ADC driver integrity, ADC is used to convert analog sensors shuch as touch, battery voltage, NTC.
• VCLEFT_a396 — Sws Touch Stuck Fault VCLEFT_a396_swsTouchStuckFault Touch was detected for longer than 120s
• VCLEFT_a397 — Sws Touch Out Of Range Fault VCLEFT_a397_swsTouchOutOfRangeFault Check for electrical short or open for touch
• VCLEFT_a398 — Sws Touch Nvm Fault VCLEFT_a398_swsTouchNvmFault Check for a valid touch calibration in NVM
• VCLEFT_a399 — Sws Touch Noisy Baseline Initialization VCLEFT_a399_swsTouchNoisyBaselineInitialization Check for a valid baseline initialization
• VCLEFT_a400 — Sws Touch Debounced Processing Error VCLEFT_a400_swsTouchDebouncedProcessingError
• VCLEFT_a401 — Sws Force Test Pattern Violation VCLEFT_a401_swsForceTestPatternViolation Check for valid force sensor readings
• VCLEFT_a402 — Sws Force Out Of Range VCLEFT_a402_swsForceOutOfRange Check for valid force sensor range readings
• VCLEFT_a403 — Sws Force Adc Check Fail VCLEFT_a403_swsForceAdcCheckFail Check for valid force sensor ADC readings
• VCLEFT_a404 — Sws Force I2C Error VCLEFT_a404_swsForceI2cError Check for valid I2C force sensor communication
• VCLEFT_a405 — Sws Force Calibration Fault VCLEFT_a405_swsForceCalibrationFault Check for valid force calibration rationality (non-zero, range)
• VCLEFT_a406 — Sws Force Parameters Fault VCLEFT_a406_swsForceParametersFault Check for valid force parameter rationality (ratiometric)
• VCLEFT_a407 — Sws Force Nvm Fault VCLEFT_a407_swsForceNvmFault Check for valid force NVM calibration
• VCLEFT_a408 — Sws Force Touch Sensor Fault VCLEFT_a408_swsForceTouchSensorFault Force cannot be calculated if touch is faulted
• VCLEFT_a409 — Sws Scroll Wheel Push Fault VCLEFT_a409_swsScrollWheelPushFault Monitor if scroll wheel push is faulted
• VCLEFT_a410 — Sws Scroll Wheel Tilt Fault VCLEFT_a410_swsScrollWheelTiltFault Monitor if scroll wheel tilt is faulted
• VCLEFT_a411 — Sws Scroll Wheel Scroll Fault VCLEFT_a411_swsScrollWheelScrollFault Monitor if scroll wheel scroll is faulted
• VCLEFT_a412 — Left Brake Tail Light Fault VCLEFT_a412_leftBrakeTailLightFault A condition affecting functionality has been detected with the left brake/tail.
• VCLEFT_a413 — Undervoltage Self Test Failure VCLEFT_a413_undervoltageSelfTestFailure The Battery Domain Left Controller Undervoltage self-test did not pass. A condition affecting a load on the Battery Domain was detected during the self-test.
• VCLEFT_a414 — Sws Haptic Motor Fault VCLEFT_a414_swsHapticMotorFault Monitor if haptic motor system is faulted
• VCLEFT_a415 — Sws Misc Fault VCLEFT_a415_swsMiscFault Additional SWS faults
• VCLEFT_a416 — Fohm Touch Adc Check Fail VCLEFT_a416_fohmTouchAdcCheckFail This ensures all the FOHM ADC driver are working nominally. ADC is used to convert analog sensors shuch as touch, battery voltage, NTC.
• VCLEFT_a417 — Fohm Touch Out Of Range Fault VCLEFT_a417_fohmTouchOutOfRangeFault Check for electrical short or open for touch
• VCLEFT_a418 — Fohm Touch Variance Fail VCLEFT_a418_fohmTouchVarianceFail This ensures all the FOHM touch detection doesn't exceed the noise threshold
• VCLEFT_a419 — Fohm Touch Stuck VCLEFT_a419_fohmTouchStuck Touch was detected for longer than 120s
• VCLEFT_a420 — Fohm Touch Sensors Implausible VCLEFT_a420_fohmTouchSensorsImplausible Single and mutual capacitive values are not matched to expected use cases (deltas are not matched)
• VCLEFT_a421 — Fohm Force Out Of Range Fault VCLEFT_a421_fohmForceOutOfRangeFault Force sensor test pattern test failed & sensor raw vaues are out of range
• VCLEFT_a422 — Undervoltage Self Test Stuck Off VCLEFT_a422_undervoltageSelfTestStuckOff One or more loads did not turn on during the Battery Domain Left Controller Undervoltage self-test. Those loads will not be powered while in Drive.
• VCLEFT_a423 — Fohm Force I2C Error VCLEFT_a423_fohmForceI2cError Check for valid I2C force sensor communication
• VCLEFT_a424 — Fohm Amber LED Fault VCLEFT_a424_fohmAmberLEDFault Force sensor test pattern test failed & sensor raw vaues are out of range