Restraints control module alerts

RCM2 alert codes

Showing 601–650 of 660

• RCM2_a825 — Up Frnt Ped Pro MR Sht2 Bat RCM2_a825_upFrntPedProMRSht2Bat The right middle (V-Bar) pedestrian protection impact accelerometer (PCSMR) has a short to battery.
• RCM2_a826 — Up Frnt Ped Pro MR Open RCM2_a826_upFrntPedProMROpen The right middle (V-Bar) pedestrian protection impact accelerometer (PCSMR) has an open circuit.
• RCM2_a827 — Up Frnt Ped Pro MR Crss Coup RCM2_a827_upFrntPedProMRCrssCoup The right middle (V-Bar) pedestrian protection impact accelerometer (PCSMR) has a cross coupling condition.
• RCM2_a828 — Up Frnt Ped Pro MR Comm Err RCM2_a828_upFrntPedProMRCommErr The right middle (V-Bar) pedestrian protection impact accelerometer (PCSMR) has a communication condition.
• RCM2_a829 — Up Frnt Ped Pro MR Int Typ RCM2_a829_upFrntPedProMRIntTyp The right middle (V-Bar) pedestrian protection impact accelerometer (PCSMR) has an initialization failure.
• RCM2_a830 — Up Frnt Ped Pro MR Config RCM2_a830_upFrntPedProMRConfig The right middle (V-Bar) pedestrian protection impact accelerometer (PCSMR) is not configured but is physically present.
• RCM2_a831 — Up Frnt Ped Pro MR Defect RCM2_a831_upFrntPedProMRDefect The right middle (V-Bar) pedestrian protection impact accelerometer (PCSMR) has a defect.
• RCM2_a832 — Up Frnt Ped Pro MR Sig Mon RCM2_a832_upFrntPedProMRSigMon The right middle (V-Bar) pedestrian protection impact accelerometer (PCSMR) has a signal monitoring condition.
• RCM2_a833 — Preten Shld C Sht2 Gnd RCM2_a833_pretenShldCSht2Gnd The 1st row center seatbelt retractor pretensioner has a short to ground.
• RCM2_a834 — Preten Shld C Sht2 Bat RCM2_a834_pretenShldCSht2Bat The 1st row center seatbelt retractor pretensioner has a short to battery.
• RCM2_a835 — Preten Shld C Open RCM2_a835_pretenShldCOpen The 1st row center seatbelt retractor pretensioner has a resistance that is too high.
• RCM2_a836 — Preten Shld C Short RCM2_a836_pretenShldCShort The 1st row center seatbelt retractor pretensioner has a resistance that is too low.
• RCM2_a837 — Preten Shld C Cross C RCM2_a837_pretenShldCCrossC The 1st row center seatbelt retractor pretensioner has a cross coupling condition.
• RCM2_a838 — Preten Shld C Config RCM2_a838_pretenShldCConfig The 1st row center seatbelt retractor pretensioner is not configured in firmware but is physically present.
• RCM2_a839 — Preten2nd Row C Sht2 Gnd RCM2_a839_preten2ndRowCSht2Gnd The 2nd row center seatbelt retractor pretensioner has a short to ground.
• RCM2_a840 — Preten2nd Row C Sht2 Bat RCM2_a840_preten2ndRowCSht2Bat The 2nd row center seatbelt retractor pretensioner has a short to battery.
• RCM2_a841 — Preten2nd Row C Open RCM2_a841_preten2ndRowCOpen The 2nd row center seatbelt retractor pretensioner has a resistance that is too high.
• RCM2_a842 — Preten2nd Row C Short RCM2_a842_preten2ndRowCShort The 2nd row center seatbelt retractor pretensioner has a resistance that is too low.
• RCM2_a843 — Preten2nd Row C Crss Coup RCM2_a843_preten2ndRowCCrssCoup The 2nd row center seatbelt retractor pretensioner has a cross coupling condition.
• RCM2_a844 — Preten2nd Row C Config RCM2_a844_preten2ndRowCConfig The 2nd row center seatbelt retractor pretensioner is not configured in firmware but is physically present.
• RCM2_a845 — Com UI chassis Control MIA RCM2_a845_comUIchassisControlMIA The 0x293 UI_chassisControl Controller Area Network (CAN) message was not received.
• RCM2_a846 — Com SCCM str Angl Sns MIA RCM2_a846_comSCCMstrAnglSnsMIA The 0x129 SCCM_steeringAngleSensor Controller Area Network (CAN) message was not received.
• RCM2_a847 — Com DAS ctrl MIA RCM2_a847_comDASctrlMIA The 0x2B9 DAS_control Controller Area Network (CAN) message was not received.
• RCM2_a848 — Com DI loc Stat MIA RCM2_a848_comDIlocStatMIA The 0x286 DI_locStatus Controller Area Network (CAN) message was not received.
• RCM2_a849 — Com IBST party1 MIA RCM2_a849_comIBSTparty1MIA The 0x38E IBST_party1 Controller Area Network (CAN) message was not received.
• RCM2_a850 — Com VCFRONT lighting MIA RCM2_a850_comVCFRONTlightingMIA The 0x3F5 VCFRONT_lighting Controller Area Network (CAN) message was not received.
• RCM2_a851 — Internal Fault Temp RCM2_a851_internalFaultTemp The Restraint Control Module (RCM) has a temporary internal condition and needs to be power cycled.
• RCM2_a852 — Autarky Event RCM2_a852_autarkyEvent An autarky event was detected
• RCM2_a853 — Config Parameters Inconsistent RCM2_a853_ConfigParametersInconsistent Beginning-of-line device configuration does not satisfy minimum configuration parameters
• RCM2_a854 — Config Parameters Not Learned RCM2_a854_ConfigParametersNotLearned Beginning-of-line device configuration not complete
• RCM2_a857 — Com VCLEFT2r C Buckle RCM2_a857_comVCLEFT2rCBuckle The 0x40A VCLEFT_restraintStatus Controller Area Network (CAN) message has a second row center buckle status SNA or condition.
• RCM2_a858 — Com V Cx LV Power State MIA RCM2_a858_comVCxLVPowerStateMIA The 0x30D VCx_LVPowerState Controller Area Network (CAN) message was not received.
• RCM2_a859 — Com V Cx LV Power State Chk Sm RCM2_a859_comVCxLVPowerStateChkSm 0x30D VCx_LVPowerState Checksum Error
• RCM2_a860 — Com V Cx LV Power State Cntr RCM2_a860_comVCxLVPowerStateCntr The 0x30D VCx_LVPowerState Controller Area Network (CAN) message has a counter error.
• RCM2_a861 — Type Approval String Not Learned RCM2_a861_typeApprovalStringNotLearned EU vehicle type approval string is not learned.
• RCM2_a862 — Com PCS alert Matrix MIA RCM2_a862_comPCSalertMatrixMIA The 0x3A4 PCS_alertMatrix Controller Area Network (CAN) message was not received.
• RCM2_a863 — Com VCFRONT alert Matrix MIA RCM2_a863_comVCFRONTalertMatrixMIA The 0x340 VCFRONT_alertMatrix Controller Area Network (CAN) message was not received.
• RCM2_a864 — Com GTW epoch Time MIA RCM2_a864_comGTWepochTimeMIA The 0x30D GTW_epochTime Controller Area Network (CAN) message was not received.
• RCM2_a865 — Com VC LVBMS status High MIA RCM2_a865_comVCLVBMSstatusHighMIA The 0x677 VC_LVBMS_statusHigh Controller Area Network (CAN) message was not received.
• RCM2_a866 — Com DAS status MIA RCM2_a866_comDASstatusMIA The 0x399 DAS_status Controller Area Network (CAN) message was not received.
• RCM2_a867 — Com PP Bepbc1 MIA RCM2_a867_comPPBepbc1MIA The 0x2cb PPB_EPBC1 Parking brake status message Controller Area Network (CAN) message was not received.
• RCM2_a868 — Head AB3rd Row R Sht2 Gnd RCM2_a868_headAB3rdRowRSht2Gnd The 3rd row right head airbag has a short to ground.
• RCM2_a869 — Head AB3rd Row R Sht2 Bat RCM2_a869_headAB3rdRowRSht2Bat The 3rd row right head airbag has a short to battery.
• RCM2_a870 — Head AB3rd Row R Open RCM2_a870_headAB3rdRowROpen The 3rd row right head airbag has a resistance that is too high.
• RCM2_a871 — Head AB3rd Row R Short RCM2_a871_headAB3rdRowRShort The 3rd row right head airbag has a resistance that is too low.
• RCM2_a872 — Head AB3rd Row R Cross C RCM2_a872_headAB3rdRowRCrossC The 3rd row right head airbag has a cross coupling condition.
• RCM2_a873 — Head AB3rd Row R Config RCM2_a873_headAB3rdRowRConfig The 3rd row right head airbag is not configured in firmware but is physically present.
• RCM2_a874 — Head AB3rd Row L Sht2 Gnd RCM2_a874_headAB3rdRowLSht2Gnd The 3rd row left head airbag has a short to ground.
• RCM2_a875 — Head AB3rd Row L Sht2 Bat RCM2_a875_headAB3rdRowLSht2Bat The 3rd row left head airbag has a short to battery.
• RCM2_a876 — Head AB3rd Row L Open RCM2_a876_headAB3rdRowLOpen The 3rd row left head airbag has a resistance that is too high.