Restraints control module alerts
Browse 660 RCM2 alert codes and open an entry for its description and recorded conditions.
RCM2 alert codes
Showing 551–600 of 660
- RCM2_a679 — Com ESP wheel Speeds MIA RCM2_a679_comESPwheelSpeedsMIA The 0x175 ESP_wheelSpeeds Controller Area Network (CAN) message was not received.
- RCM2_a680 — Com ESP wheel Speeds Chk Sm RCM2_a680_comESPwheelSpeedsChkSm The 0x175 ESP_wheelSpeeds Controller Area Network (CAN) message has a checksum error.
- RCM2_a681 — Com ESP wheel Speeds Cntr RCM2_a681_comESPwheelSpeedsCntr The 0x175 ESP_wheelSpeeds Controller Area Network (CAN) message has a counter error.
- RCM2_a682 — Com DI speed MIA RCM2_a682_comDIspeedMIA The 0x257 DI_speed Controller Area Network (CAN) message was not received.
- RCM2_a683 — Com DI speed Chk Sm RCM2_a683_comDIspeedChkSm The 0x257 DI_speed Controller Area Network (CAN) message has a checksum error.
- RCM2_a684 — Com DI speed Cntr RCM2_a684_comDIspeedCntr The 0x257 DI_speed Controller Area Network (CAN) message has a counter error.
- RCM2_a685 — Com DI chass Control MIA RCM2_a685_comDIchassControlMIA The 0x148 DI_chassisControl Controller Area Network (CAN) message was not received.
- RCM2_a686 — Com DI chass Control Chk Sm RCM2_a686_comDIchassControlChkSm 0x148 DI_chassisControl Checksum Error
- RCM2_a687 — Com DI chass Control Cntr RCM2_a687_comDIchassControlCntr The 0x148 DI_chassisControl Controller Area Network (CAN) message has a counter error.
- RCM2_a688 — Com VCLEFT rest MIA RCM2_a688_comVCLEFTrestMIA The 0x30A VCLEFT_restraintStatus Controller Area Network (CAN) message was not received.
- RCM2_a689 — Com VCLEFT rest Chk Sm RCM2_a689_comVCLEFTrestChkSm The 0x30A VCLEFT_restraintStatus Controller Area Network (CAN) message has a checksum condition.
- RCM2_a690 — Com VCLEFT rest Cntr RCM2_a690_comVCLEFTrestCntr The 0x30A VCLEFT_restraintStatus Controller Area Network (CAN) message has a counter condition.
- RCM2_a691 — Com VCLEFT1r L Buckle RCM2_a691_comVCLEFT1rLBuckle The 0x30A VCLEFT_restraintStatus Controller Area Network (CAN) message has a front left buckle switch SNA or condition.
- RCM2_a692 — Com VCLEFT2r L Buckle RCM2_a692_comVCLEFT2rLBuckle The Restraint Control Module (RCM) is not receiving the expected Controller Area Network (CAN) messages from the second-row left seat buckle status on the CAN bus.
- RCM2_a693 — Com VCLEFT1r LSTPS RCM2_a693_comVCLEFT1rLSTPS The 0x30A VCLEFT_restraintStatus Controller Area Network (CAN) message has a front left seat track position SNA or condition.
- RCM2_a694 — Com VCRIGHT rest MIA RCM2_a694_comVCRIGHTrestMIA The 0x31A VCRIGHT_restraintStatus Controller Area Network (CAN) message was not received.
- RCM2_a695 — Com VCRIGHT rest Chk Sm RCM2_a695_comVCRIGHTrestChkSm The 0x31A VCRIGHT_restraintStatus Controller Area Network (CAN) message has a checksum error.
- RCM2_a696 — Com VCRIGHT rest Cntr RCM2_a696_comVCRIGHTrestCntr The 0x31A VCRIGHT_restraintStatus Controller Area Network (CAN) message has a counter error.
- RCM2_a697 — Com VCRIGHT1r R Buckle RCM2_a697_comVCRIGHT1rRBuckle The 0x31A VCRIGHT_restraintStatus Controller Area Network (CAN) message has a front right buckle switch SNA or condition.
- RCM2_a698 — Com VCRIGHT2r R Buckle RCM2_a698_comVCRIGHT2rRBuckle The 0x31A VCRIGHT_restraintStatus Controller Area Network (CAN) message has a second row right buckle status SNA or condition.
- RCM2_a699 — Com VCRIGHT ocs RCM2_a699_comVCRIGHTocs The 0x31A VCRIGHT_restraintStatus Controller Area Network (CAN) message has a front right occupant classification condition.
- RCM2_a700 — Com VCRIGHT1r RSTPS RCM2_a700_comVCRIGHT1rRSTPS The 0x31A VCRIGHT_restraintStatus Controller Area Network (CAN) message has a front right seat track position SNA or condition.
- RCM2_a701 — Com VCSEC tpms Status MIA RCM2_a701_comVCSECtpmsStatusMIA The 0x23A VCSEC_TPMSStatus Controller Area Network (CAN) message was not received.
- RCM2_a750 — Lin Internal Timeout RCM2_a750_linInternalTimeout LIN Communication Timeout
- RCM2_a799 — Internal Fault RCM2_a799_internalFault The Restraint Control Module (RCM) has an internal condition and needs to be replaced.
- RCM2_a800 — Crc Fault RCM2_a800_crcFault CRC mismatch in a section that was marked for update
- RCM2_a801 — Parameter Layout ID RCM2_a801_parameterLayoutID Parameter Layout ID Invalid
- RCM2_a802 — Parameter Transfer ID RCM2_a802_parameterTransferID Parameter Transfer ID Invalid
- RCM2_a803 — Algo Verify Sensor ID RCM2_a803_algoVerifySensorID
- RCM2_a804 — Config Data Inconsistent RCM2_a804_configDataInconsistent rb_syc_ConfigurationDataInconsistent_flt
- RCM2_a805 — Sw Version Wrong RCM2_a805_swVersionWrong Wrong Software Version
- RCM2_a806 — Config VI Nnot Learned RCM2_a806_configVINnotLearned VIN Initial Configuration Not Complete
- RCM2_a807 — Config VI Nmismatch RCM2_a807_configVINmismatch VIN Stored does not match Vehicle
- RCM2_a808 — Config Drive Not Learned RCM2_a808_configDriveNotLearned Drive Orientation Learning incomplete.
- RCM2_a809 — Config Drive Mismatch RCM2_a809_configDriveMismatch Drive Orientation Stored does not match Vehicle.
- RCM2_a810 — Boot Up Action Failure RCM2_a810_bootUpActionFailure Post Bootloader Actions Failed
- RCM2_a811 — Com Axle Speed RCM2_a811_comAxleSpeed The 0x276 DI_aggregatedAxleSpeed Controller Area Network (CAN) message was not received.
- RCM2_a812 — Idf Misuse Monitoring Err RCM2_a812_idfMisuseMonitoringErr Fault raised when a misuse monitoring event happens
- RCM2_a813 — Idf Envi Monitoring Error RCM2_a813_idfEnviMonitoringError Fault raised when an environment sensor monitoring error happens
- RCM2_a814 — Idf Envi Monitoring Event RCM2_a814_idfEnviMonitoringEvent Fault raised when an environment sensor monitoring event happens
- RCM2_a815 — Up Frnt Ped Pro ML Sht2 Gnd RCM2_a815_upFrntPedProMLSht2Gnd The left middle (V-Bar) pedestrian protection impact accelerometer (PCSML) has a short to ground.
- RCM2_a816 — Up Frnt Ped Pro ML Sht2 Bat RCM2_a816_upFrntPedProMLSht2Bat The left middle (V-Bar) pedestrian protection impact accelerometer (PCSML) has a short to battery.
- RCM2_a817 — Up Frnt Ped Pro ML Open RCM2_a817_upFrntPedProMLOpen The left middle (V-Bar) pedestrian protection impact accelerometer (PCSML) has an open circuit.
- RCM2_a818 — Up Frnt Ped Pro ML Crss Coup RCM2_a818_upFrntPedProMLCrssCoup The left middle (V-Bar) pedestrian protection impact accelerometer (PCSML) has a cross coupling condition.
- RCM2_a819 — Up Frnt Ped Pro ML Comm Err RCM2_a819_upFrntPedProMLCommErr The left middle (V-Bar) pedestrian protection impact accelerometer (PCSML) has a communication condition.
- RCM2_a820 — Up Frnt Ped Pro ML Int Typ RCM2_a820_upFrntPedProMLIntTyp The left middle (V-Bar) pedestrian protection impact accelerometer (PCSML) has an initialization failure.
- RCM2_a821 — Up Frnt Ped Pro ML Config RCM2_a821_upFrntPedProMLConfig The left middle (V-Bar) pedestrian protection impact accelerometer (PCSML) is not configured but is physically present.
- RCM2_a822 — Up Frnt Ped Pro ML Defect RCM2_a822_upFrntPedProMLDefect The left middle (V-Bar) pedestrian protection impact accelerometer (PCSML) has a defect.
- RCM2_a823 — Up Frnt Ped Pro ML Sig Mon RCM2_a823_upFrntPedProMLSigMon The left middle (V-Bar) pedestrian protection impact accelerometer (PCSML) has a signal monitoring condition.
- RCM2_a824 — Up Frnt Ped Pro MR Sht2 Gnd RCM2_a824_upFrntPedProMRSht2Gnd The right middle (V-Bar) pedestrian protection impact accelerometer (PCSMR) has a short to ground.