Interior cabin radar alerts
Browse 39 ICR alert codes and open an entry for its description and recorded conditions.
ICR alert codes
Showing 1–39 of 39
- ICR_a001 — Watchdog Reset ICR_a001_WatchdogReset Warns if the processor has experienced a reset due to watchdog reset.
- ICR_a002 — Power Loss Reset ICR_a002_PowerLossReset Warns if the processor has experienced a reset due to power loss.
- ICR_a003 — SW Assertion ICR_a003_SWAssertion An internal software assertion has failed.
- ICR_a005 — CANTX Error ICR_a005_CANTXError An error has been detected with CAN transmission. Used by engineering to debug.
- ICR_a006 — CANTX cyclic Error ICR_a006_CANTX_cyclicError An error has been detected within the CANTX cyclic dispatcher generated code. Used by engineering to debug.
- ICR_a012 — CPU Reset ICR_a012_CPUReset CPU detected a reset.
- ICR_a013 — Alert Manager Fault ICR_a013_AlertManagerFault Alert Manager encountered an internal processing error.
- ICR_a015 — NVMM Error ICR_a015_NVMMError An issue is indicated from the non-volatile memory manager.
- ICR_a016 — NVMM Record Error ICR_a016_NVMMRecordError An issue is indicated from a particular non-volatile memory record.
- ICR_a021 — Task Scheduler Error ICR_a021_TaskSchedulerError If a task was not able to run at the appropriate time.
- ICR_a022 — Task Init Error ICR_a022_TaskInitError If a task failed to initialize.
- ICR_a029 — Core Dump ICR_a029_CoreDump Indicates an exception occurred and core dump data is present.
- ICR_a030 — ECU Log Upload Request ICR_a030_ECULogUploadRequest Triggers on board diagnostics service to upload log buffer.
- ICR_a031 — UDS Active ICR_a031_UDSActive A unified diagnostics services (UDS) request was made
- ICR_a041 — High CPU Load ICR_a041_HighCPULoad CPU under heavy load.
- ICR_a042 — High Stack Usage ICR_a042_HighStackUsage High stack memory usage was detected
- ICR_a043 — Task1ms Error ICR_a043_Task1msError Debug information for 1ms task errors.
- ICR_a044 — Task10ms Error ICR_a044_Task10msError Debug information for 10ms task errors
- ICR_a045 — Task100ms Error ICR_a045_Task100msError Debug information for 100ms task errors.
- ICR_a046 — Task1000ms Error ICR_a046_Task1000msError Debug information for 1000ms task errors.
- ICR_a058 — Input R High Sync Debug ICR_a058_inputRHighSyncDebug Voltage drop on input power is high
- ICR_a059 — Input Resistance High ICR_a059_inputResistanceHigh A large voltage drop is detected in the input power to the vehicle controller, indicating the resistance on the input power feed to the vehicle controller is higher than expected.
- ICR_a060 — Engineering Build ICR_a060_engineeringBuild The software installed on the vehicle is intended for engineering use and development purposes only. The vehicle software may have some expected features disabled for testing purposes, or include new features whose function is not yet full…
- ICR_a061 — X CP Connected ICR_a061_XCPConnected Indicates an active connection to the universal measurement and calibration protocol state machine
- ICR_a062 — X CP Was Connected ICR_a062_XCPWasConnected Indicates there was an active connection to the universal measurement and calibration protocol state machine
- ICR_a063 — Switch Fault ICR_a063_SwitchFault A condition affecting switch functionality has been detected.
- ICR_a064 — Bus Sleep Req Timeout ICR_a064_busSleepReqTimeout Indicates if a bus has timed out of a sleep request from the network manager
- ICR_a133 — Radar Blocked ICR_a133_radarBlocked The Interior Cabin Radar (ICR) Electronic Control Unit (ECU) detects the ICR antenna is physically blocked.
- ICR_a134 — Radar Pgood ICR_a134_radarPgood The ICR has limited/compromised power supplies
- ICR_a135 — Radar Tx Ball Break ICR_a135_radarTxBallBreak The ICR Tx Ball Break detection test report
- ICR_a136 — Radar High Temperature ICR_a136_radarHighTemperature ICR temperature has crossed high threshold
- ICR_a137 — Radar Blocked ICR_a137_radarBlocked The Interior Cabin Radar (ICR) Electronic Control Unit (ECU) detects the ICR antenna is physically blocked.
- ICR_a138 — Driver Side Mismatch ICR_a138_DriverSideMismatch Driver side config is different between ICR and the Vehicle
- ICR_a139 — Abnormal Blockage Detected ICR_a139_AbnormalBlockageDetected The Interior Cabin Radar (ICR) Electronic Control Unit (ECU) detects abnormal blockage readings that are outside of the expected range
- ICR_a140 — Occupancy Exception Encountered ICR_a140_OccupancyExceptionEncountered The Interior Cabin Radar (ICR) Electronic Control Unit (ECU) has encountered an exception in the occupancy module
- ICR_a141 — Requires Replacement ICR_a141_RequiresReplacement The Interior Cabin Radar (ICR) Electronic Control Unit (ECU) encounters a non-serviceable internal condition requiring replacement. This includes either a PMIC quality excursion, uncalibrated, or calibration data validation failure status
- ICR_a142 — Mode Override Active ICR_a142_ModeOverrideActive The Interior Cabin Radar (ICR) Electronic Control Unit (ECU) has entered a mode override state
- ICR_a143 — DSP Core Skipped ICR_a143_DSPCoreSkipped The Interior Cabin Radar (ICR) Electronic Control Unit (ECU) has skipped a DSP core execution cycle
- ICR_a144 — Occupancy Notification Alert ICR_a144_OccupancyNotificationAlert The Interior Cabin Radar (ICR) Electronic Control Unit (ECU) has detected occupancy algorithm exceptions which required notification