iBooster brake booster alerts

IBST alert codes

Showing 101–150 of 256

• IBST_a101 — Current2 Offset Low IBST_a101_current2OffsetLow iBooster (IBST) detected offset current 2 out of range (low).
• IBST_a102 — Current1 Offset High IBST_a102_current1OffsetHigh iBooster (IBST) detected offset current 1 out of range (high).
• IBST_a103 — Current1 Offset Low IBST_a103_current1OffsetLow iBooster (IBST) detected offset current 1 out of range (low).
• IBST_a104 — Bridge Driver Short IBST_a104_bridgeDriverShort iBooster (IBST) detected a error in metal-oxide-semiconductor field-effect transistor (MOSFET) bridge driver shorted detection.
• IBST_a105 — Li PS Undervoltage IBST_a105_LiPSUndervoltage iBooster (IBST) detected linear position sensor 5V supply undervoltage caused by 12V undervoltage.
• IBST_a106 — Li PS5 V Supply IBST_a106_LiPS5VSupply iBooster (IBST) detected a linear position sensor 5V supply error.
• IBST_a107 — Li PS2 Pwm Line High IBST_a107_LiPS2PwmLineHigh iBooster (IBST) detected linear position sensor channel 2 line shorted to supply or interruption of sensor ground.
• IBST_a108 — Li PS2 Pwm Line Low IBST_a108_LiPS2PwmLineLow iBooster (IBST) detected linear position sensor channel 2 line shorted to ground.
• IBST_a109 — Li PS2 Pwm Transmission IBST_a109_LiPS2PwmTransmission iBooster (IBST) detected linear position sensor channel 2 duty or period is out of range.
• IBST_a110 — Li PS1 Sent Line High IBST_a110_LiPS1SentLineHigh iBooster (IBST) detected linear position sensor channel 1 line shorted to supply or interruption of sensor ground.
• IBST_a111 — Li PS1 Sent Line Low IBST_a111_LiPS1SentLineLow iBooster (IBST) detected linear position sensor channel 1 line shorted to ground.
• IBST_a112 — Li PS1 Sent Transmission IBST_a112_LiPS1SentTransmission iBooster (IBST) detected linear position sensor channel 1 failure in Single Edge Nibble Transmission (SENT) protocol.
• IBST_a113 — Li PS1 Sent Sensor IBST_a113_LiPS1SentSensor iBooster (IBST) detected a linear position sensor channel 1 sensor internal failure.
• IBST_a114 — Party Bus Off IBST_a114_partyBusOff CiBooster (IBST) detected a BusOff failure on Controller Area Network (CAN) 1 (PARTY).
• IBST_a115 — Chassis Bus Off IBST_a115_chassisBusOff iBooster (IBST) detected a BusOff failure on Controller Area Network (CAN) 2 (CHASSIS).
• IBST_a116 — Supply Undervoltage Lvl2 IBST_a116_supplyUndervoltageLvl2 iBooster (IBST) detected UBB voltage is in undervoltage level 2 failure range. System shall be in 'ReducedPerformance' state.
• IBST_a117 — Supply Overvoltage Lvl2 IBST_a117_supplyOvervoltageLvl2 iBooster (IBST) detected UBB voltage is in overvoltage level 2 failure range. System shall be in 'ReducedPerformance' state.
• IBST_a118 — RPS NvM Read Fault IBST_a118_RPSNvMReadFault iBooster (IBST) detected a read failure due to one or more Non-volatile Memory (NvM) items differentiating with debug data: RPS_Offset RPS_Rescaling, RPS_CorrAmplitudes, RPS_CorrPhases, or RPS_Version.
• IBST_a119 — RPS Wrong Calib Data IBST_a119_RPSWrongCalibData iBooster (IBST) detected inconsistent Rotation Position Sensor (RPS) calibration data version compared to version in software.
• IBST_a120 — RPS Vector Range High IBST_a120_RPSVectorRangeHigh iBooster (IBST) detected Rotation Position Sensor (RPS) raw signals (sine and cosine): Vector length too high.
• IBST_a121 — RPS Vector Range Low IBST_a121_RPSVectorRangeLow iBooster (IBST) detected Rotation Position Sensor (RPS) raw signals (sine and cosine): Vector length too low.
• IBST_a122 — RPS Vector Oscillating IBST_a122_RPSVectorOscillating iBooster (IBST) detected Rotation Position Sensor (RPS) raw signals (sine and cosine): Vector length oscillating.
• IBST_a123 — Bridge Driver Unavail IBST_a123_bridgeDriverUnavail iBooster (IBST) detected motor is temporarily unavailable due to reinitialization of bridge driver.
• IBST_a124 — OBD Current1 OOR High IBST_a124_OBDCurrent1OORHigh iBooster (IBST) detected phase current 1 out of range (high).
• IBST_a125 — OBD Current2 OOR High IBST_a125_OBDCurrent2OORHigh iBooster (IBST) detected phase current 2 out of range (high).
• IBST_a126 — OBD Current1 OOR Low IBST_a126_OBDCurrent1OORLow iBooster (IBST) detected phase current 1 out of range (low).
• IBST_a127 — OBD Current2 OOR Low IBST_a127_OBDCurrent2OORLow iBooster (IBST) detected phase current 2 out of range (low).
• IBST_a128 — BLM Muxer Timeout Error IBST_a128_BLMMuxerTimeoutError iBooster (IBST) detected a timeout event during brushless motor (BLM) initialization tests.
• IBST_a129 — Load Dump On FSL Test IBST_a129_loadDumpOnFSLTest iBooster (IBST) detected a load dump event before or during Bridge Main Switch (BMS) Fail Safe Logic Test (FSLT).
• IBST_a130 — DTS Functional Range Low IBST_a130_DTSFunctionalRangeLow iBooster (IBST) detected the differential travel signal (channel 1) is out of functional range (low).
• IBST_a131 — DTS Functional Range High IBST_a131_DTSFunctionalRangeHigh iBooster (IBST) detected the differential travel signal (channel 1) is out of functional range (high).
• IBST_a132 — DTS Plausi Check1vs2 IBST_a132_DTSPlausiCheck1vs2 iBooster (IBST) detected deviation between differential travel signal channel 1 and 2 is out of functional range.
• IBST_a133 — DTS Offset Too Low IBST_a133_DTSOffsetTooLow iBooster (IBST) detected Differential Travel Sensor (DTS) offset is too low.
• IBST_a134 — DTS Offset Too High IBST_a134_DTSOffsetTooHigh iBooster (IBST) detected Differential Travel Sensor (DTS) offset is confirmed too high.
• IBST_a135 — ESP party1 DLC IBST_a135_ESPparty1DLC
• IBST_a136 — ESP party1 Timeout IBST_a136_ESPparty1Timeout The brake booster (IBST) does not receive a message from the Electronic Stability Program (ESP) within the expected time frame.
• IBST_a137 — ESP party1 Checksum IBST_a137_ESPparty1Checksum
• IBST_a138 — ESP party1 Counter IBST_a138_ESPparty1Counter
• IBST_a139 — ESP party2 DLC IBST_a139_ESPparty2DLC
• IBST_a140 — ESP party2 Timeout IBST_a140_ESPparty2Timeout The brake booster (IBST) does not receive a message from the Electronic Stability Program (ESP) within the expected time frame.
• IBST_a141 — ESP party2 Checksum IBST_a141_ESPparty2Checksum
• IBST_a142 — ESP party2 Counter IBST_a142_ESPparty2Counter
• IBST_a143 — ESP party3 DLC IBST_a143_ESPparty3DLC
• IBST_a144 — ESP party3 Timeout IBST_a144_ESPparty3Timeout The brake booster (IBST) does not receive a message from the Electronic Stability Program (ESP) within the expected time frame.
• IBST_a145 — ESP party3 Checksum IBST_a145_ESPparty3Checksum
• IBST_a146 — ESP party3 Counter IBST_a146_ESPparty3Counter
• IBST_a147 — PSC Motor Size Read Fault IBST_a147_PSCMotorSizeReadFault iBooster (IBST) detected the value in the Non-volatile Memory (NvM) block 'PSC_MotorSize' is incorrect or 'empty'.
• IBST_a148 — MLI Gain Mech Read Fault IBST_a148_MLIGainMechReadFault iBooster (IBST) detected a 'read failed' condition for parameter 'gain_mech'.
• IBST_a149 — MLITMC Area Read Fault IBST_a149_MLITMCAreaReadFault iBooster (IBST) detected a 'read failed' condition for parameter 'Vehicle_TMC_area_mm2'.
• IBST_a150 — Motor Test Fault IBST_a150_motorTestFault iBooster (IBST) detected a hardware failure impacting motor control during motor test.