Skip to content

VCFRONT1_a485 — Uv Self Test Load Unattempted On Dbg

Full alert identifier: VCFRONT1_a485_uvSelfTestLoadUnattemptedOnDbg

Alert description

One or more loads was not commanded on or did not remain commanded on during the PCS Domain Undervoltage self-test.

Potential impact

Impacted loads may not be turned off as expected. This alert is primarily informational and is used for logging purposes.

Set condition

One or more loads was not commanded on or did not remain commanded on during the PCS Domain Undervoltage self-test.

Clear condition

The PCS Domain Undervoltage self-test runs again and the load is commanded on successfully.

Signals to check

These diagnostic fields are associated with VCFRONT1_a485. Check the alert's Payload in Service Mode Plus for available values.

Signal Unit
Upstream Efuse Unattempted On VCFRONT1_a485_upstreamEfuseUnattemptedOn —

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of VCFRONT1_a485.

Browse all VCFRONT1 alert codes