DPB_a287 — Brake Cmd State Invalid

Full alert identifier: DPB_a287_brakeCmdStateInvalid

Alert description

error.

Potential impact

System will be running with full assistant for driver brake request.

Set condition

PM_brakePedalCmdQF was set as Invalid.

Clear condition

No internal issue is detected after changing operation cycle.

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of DPB_a287.

DPB_a286 — Ebr Cmd State Invalid DPB_a286_ebrCmdStateInvalid The External Brake Request (EBR) command state reported by the Pedal Monitor (PM) is invalid.
DPB_a224 — Brake Boost Lost DPB_a224_brakeBoostLost Brake boosting capability is lost in DPB system.
DPB_a227 — Brake Fluid Loss DPB_a227_brakeFluidLoss Decoupled Power Brake (DPB) detects suspected brake fluid loss after running the Cyclic Volume Check (CVC). CVC can be identified by DPB_a314_runningCyclicVolumeCheck.
DPB_a280 — Low Brake Fluid DPB_a280_LowBrakeFluid Brake fluid level low.
DPB_a310 — DIR Axle Torque Invalid DPB_a310_DIRAxleTorqueInvalid Invalid Drive Inverter Rear (DIR) drive torque signal or qualifier (QF) is received.

Browse all DPB alert codes